A Study on the Governing Factor of Fatigue Limit in Austempered Ductile Iron

오스템퍼링 구상흑연주철의 피로한도 지배인자에 관한 연구

  • 정회원 (정회원, 강원대학교 기계공학과) ;
  • 김진학 (강원대학교 대학원)
  • Published : 1999.06.01

Abstract

We examined the governing factors of fatigue limit in annealed and austempered ductile iron specimens machined micro hole(dia.<0.4mm) in rotary bending fatigue test. Also, the quantitative relationship between fatigue limit and maximum defect size in specimens was investigated. Artificial defect(micro-pit type, dia.<0.4mm) on specimen surface did not bring about an obvious reduction of fatigue limit in austempered ductile iton(ADI) as compared with annealed ductile iron. According to the investigation of ${\sqrt{area}}_c$ which is the critical defect size to crack initiation at artificial defect, ${\sqrt{area}}_c$ of ADI was larger than that of annealed ductile iron. This shows that the situation of crack initiation at artificial defect in ADI is more difficult in comparison with annealed ductile iron. Maximum defect size is one of the important parameters to predict fatigue limit. And, the quantitative relationship, between the fatigue limit ${\sigma}_{\omega}$ and the maximum defect size ${\sqrt{area}}_{max}$ can be expressed to ${\sigma}_{\omega}^n{\cdot}{\sqrt{area}}_{max}=C_2$ where, $C_2$ are constant. Moreover, it is possible to explain the difference in fatigue limit between, austempered and annealed ductile iron by introducing the parameter ${\delta}(=N_{sg}/N_{total})$in a plain spectimen.

Keywords

References

  1. ASM Handbook v.19 Fatigue and Fracture Properties fo Cast Irons Steven R. Lampman
  2. 機械材料學 김재원
  3. 大韓鑄造學會誌 v.10 no.4 확대되는 球狀黑鉛鑄鐵의 用送 최답천
  4. ASM Handbook v.1 Ductile Irons Lyle R. Jenkins
  5. 대한기계학회논문집 v.17 no.6 오스템퍼링 한 저합금 구상흑연주철의 부식마멸특성 및 그 기구에 관한 연구 박흥식;진동규
  6. 한국열처리공학회지 v.11 no.1 ADI의 조직특성에 미치는 2단 오스테나이트화 처리조건의 영향 최석림;윤기혁;문원진;강창룡;김한군
  7. 한국열처리공학회지 v.11 no.2 ADI의 기계적성질에 미치는 합금언소 및 열처리의 영향 김석원;우기도
  8. 日本機械 學會論文集 v.30 no.575A オ-ステンバ球狀黑鉛鑄鐵の高サイクル波勞特性 土屈滋;光永公一;石本悟
  9. 日本機械學會論文集 v.62-595A オ-ステンバ球狀黑鉛鑄鐵の高サイクル疲勞に反ぼす表面硬さの影響 土屈滋;原出昭治;高原正雄;廣安式;池田委男
  10. 日本機械學會論文集 v.63-612A P-S-N 球儀に基づく表面改質部品の波勞信賴性設計法の構築 片平和俊;鈴木秀人
  11. 日本材料學會論文集 v.38-433A 球狀黑鉛鑄鐵の波勞强度に及ぼす黑鉛の形狀, 寸法,分布の影響 遠藤正浩
  12. 徵小缺陷と介在物の影響 村七敬宣
  13. 日本機械學會論文集 v.63-610A オ-ステンパ處理球狀黑鉛鑄鐵の長壽命域における波勞强度 加藤容三;高藤新三郞
  14. Proc. fo IMEKO TC3/APMF '98 Effects of Micro Structural and Mechanical factors on Fatigue Limit in SGI Min-Gun Kim;Jin-Hak Kim
  15. 日本機械學會論文集 v.49 no.438A 疲勞强度に及ぼす徵小缺陷の影響の評價法 村上敬宣;遠藤正浩
  16. 日本機械 學會弟69期通常總會講演講演論文潗 v.A √areaパラメ-タモデルに基づく球狀黑鉛鑄鐵の波勞强度豫測 遠藤正浩
  17. Proc. Int. Conf. on fatigue of Metals Metallographic Observation on the Fatigue Metals Hempel, M.
  18. 日本機械學會論文集 v.39 no.312A 波れ强度の存在と徵視視的停留き裂の關係 西谷;西出
  19. 대한기계학회논문집 v.12 no.3 炭素鋼 徵小波勞 크랙전파의 不限界條件 김민건
  20. 日本機械學會弟69期通常總會講演講演論文潗 v.A 球狀黑鉛鑄鐵用いた缺陷材の波勞限度定?評價法とそ波勞限度への適用 杉山好弘;淺見克敏;松岡忍