Abstract
The laboratory datas are for local scour depth measurement at vertical-wall abutment. These include the data to demonstrate the effects of local scour depth of abutment nose shape, alignment angle, flow depth and flume slope. The pattern of local scour were measured and analyzed the abutments which are rectangular, sharp, chamfered rectangular and ablong nose shapes. The experiments were carried out with varing the flume slope and alignment algle increasing flow depth every step in 1cm for four abutment types on the live-bed scour conditions. The flume slope and alignment angle were varied in five cases : for latter 30 $^{\circ}$, 60 $^{\circ}$, 90 $^{\circ}$, 120 $^{\circ}$ and 150 $^{\circ}$, for former 0.01%, 0.03%, 0.05%, 0.1% and 0.2%. The maximum scour depths were analyzed for the shaped of abutment nose with rectangular, ablong, chamfered rectangular and sharp in order. The results of the experiments show that the scour depth varies not only with abutment nose shapes and alignment angle but also with the flow depth and flume slope.
연직벽 교대에서의 국부세굴심을 측정한 실험실 자료들이다. 이들 자료들은 교대의 끝단형상, 정렬각도, 흐름수심, 흐름경사에 따라 국부 세굴심의 영향을 주는 자료들로 포함한다. 모형교대 끝단 형상이 직사각형, 타원형, 끝단을 깎아낸 직사각형, 예연형인 교대에서 국부세굴의 양상이 실험적 연구에 의하여 분석되었다. 실험들은 4개의 교대 형상에 대하여 흐름수심을 약 1cm씩 증가시켜서 이동상 세굴 조건하에 실험을 하였다. 수로의 하상경사는 0.01%, 0.03% 0.05% 0.1%, 0.2%로 정렬각도는 30 $^{\circ}$, 60 $^{\circ}$, 90 $^{\circ}$, 120 $^{\circ}$, 150 $^{\circ}$로 변화시켜 실험을 실시하였다. 최대 세굴심은 끝단 형상이 직사각형, 타원형, 끝단을 깎아낸 직사각형, 예연형의 순서로 분석되었다. 실험결과들은 세굴심이 교대의 형상뿐만 아니라 정렬각도, 흐름수심, 수로경사에 따라 다르게 나타나는 것을 보여주었다.