Journal of the Korean Institute of Telematics and Electronics D (전자공학회논문지D)
- Volume 35D Issue 11
- /
- Pages.85-90
- /
- 1998
- /
- 1226-5845(pISSN)
Fabrication of a 1*4 Polymeric Optical Power Divider Based on the Multi-Mode Interference Effect
다중모드간섭 현상에 입각한 1*4 폴리머 광파워분할기의 제작
Abstract
A 1 4 polymeric optical power divider based on the multimode interference effect is designed and fabricated. The two dimensional finite difference beam propagation method has been utilized in designing the device. Polymers used for the core layer and the cladding layer are Cyclotene-3022 and UV-15, respectively. The device is fabricated by the reactive ion etching method. The splitting ratio of the fabricated device is 0.93 : 1.00 : 0.93 : 0.90 for TE mode and 0.84 : 0.94 : 1.00 : 0.83 for TM mode. The advantages of this device are small size and low polarization-dependence.
다중모드간섭 현상에 입각한 1 4 폴리머 광파워분할기를 설계, 제작하였다. 이 광파워분할기는 2차원 유한차분 빔전파방법을 사용하여 설계하였다. 코어와 클래딩 물질로 각각 Cyclotene-3022과 UV-15이 사용되었고, 반응이온식각 공정에 의해 제작되었다. 제작된 1 4 광파워분할기의 각 출구에서의 측정된 광출력비는 TE모드에서 0.93 : 1.00 : 0.93 : 0.90, TM모드에서 0.84 : 0.94 : 1.00 : 0.83 이었다. 다중모드간섭 현상을 이용한 1 4 광파워분할기는 소자의 길이가 작고, 편광에 따른 의존도가 작은 장점이 있다.
Keywords