Journal of KSNVE (소음진동)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지

Analysis of Free Vibration of a Cylindrical Shell with a Circular Plate Under Various Kinds of Boundary Conditions

다양한 경계조건에서 원판이 결합된 원통 셸의 고유진동 해석

  • 임정식 (한국원자력연구소 미래형핵연료개발팀) ;
  • 손동성 (한국원자력연구소)
  • Published : 1998.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

A theoretical formulation for the analysis of free vibration of a cylindrical shell with a circular plate attached at an arbitrary axial position of the shell under various kinds of boundary conditions was derived and programed to get the numerical results for natural frequencies and mode shapes of the combined system. The boundary conditions of the shell to be considered here are clamped-free, clamped-simply supported, both ends clamped and both ends simply supported. The frequencies and mode shapes from theoretical calculation were compared with those of commercial finite element code, ANSYS. The results showed good agreement with those of ANSYS in frequencies and mode shapes. The program will contribute to the design optimization of a shell/plate combined system through the analysis of natural frequencies and mode shapes for the system.

Keywords

References

  1. NASA Technical Translation F-341 Use of the Method of Dynamic Rigidities for Calculating the Fre-quencies of Natural Vibration of Built-up Shells Shkarov I.E.
  2. Ph. D. Thesis, Purdue University Vibration Analysis of Shell Structures Using Receptances Faulkner, L.
  3. Vibration of Shlles and Plates(2nd edition) Soedel, W.
  4. Journal of Sound and Vibration v.162 no.3 Natural Frequeencies and Modes of a Circular Plate Welded to a Circular Cylindrical Shell at Arbitrary Axial Positions Huang, D. T.;Soedel, W.
  5. Journal of Sound and Vibration v.166 no.2 On the Free Vibration of Multiple Plates Welded to a Cylindrical Shell with Special Attention to Mode Pairs Huang, D. T.;Soedel, W.
  6. Journal of Sound and Vibration v.166 no.2 Study of the Forced Vibration of Shell-Plate Combinations Using the Receptance method Huang, D. T.;Soedel, W.
  7. Journal of Sound and Vibration v.108 no.1 Natural Frequencies and Modes of Cylindrical Polygonal Ducts Using Receptance Methods Azimi, S.;Soedel, W.;Hamiltion, J. F.
  8. Journal of Sound and Vibration v.92 no.3 Receptance Methods and the Dynamics of Disordered One-dimensional Lattices Mead, D. J.;Lee, S. M.
  9. 한국소음진동공학회지 v.7 no.2 원판이 결합된 외팔 원통 셸의 고유진동 특성 임정식;이영신;손동성
  10. Journal of Sound and Vibration v.213 no.1 Free Vibration of Clamped-Free Circular Cylindrical Shell with a Plate Attached at an Arbitrary Axial Position Yim J. S. Sohn D. S;Lee Y. S.
  11. Advanced in Computational Method for Simulation Free Vibration Analysis of Clamped-Free and Clamped-Free with Ring Stiffened Circular Cylindrical Shells Yim, J. S.;Lee, Y. S.;Sohn, D. S.
  12. 한국소음진동공학회지 v.6 no.1 일단고정-일단자유 원통 셸의 고유진동 해석 임정식
  13. Journal of Sound and Vibration v.35 no.1 Calculation of Natural Frequencies of Fixed-Free Circular Cylindrical Shells Sharma, C. B.