Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지

A Study on the Nonlinear Buckling Behavior of Thin-Walled Sections

박판단면의 비선형 좌굴거동에 관한 해석적연구

  • 진창선 (영남대학교 공업기술연구소) ;
  • 권영봉 (영남대학교 토목공학과)
  • Received : 1998.05.18
  • Published : 1998.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this paper is to provide and verify an analytical method, based on the spline finite strip method, which can be used to investigate the buckling mode and stress of thin-walled steel sections. Geometric imperfection and initial stress of plates and plate assemblies, which are resulted from various preloadings and may cause prebuckling deformations before buckling, are included in the analysis. Material nonlinearity and residual stress are also considered. It can be applied to sections with simple or non-simple boundary conditions and arbitrary loading. The method has been applied to investigate the buckling behavior of plates and plate assemblies which are subjected to compression with initial imperfections and residual stresses.

본 논문에서는 박판구조물의 좌굴모드 및 좌굴응력값을 구하기 위해서 spline finite strip method를 이용하여 박판구조물이 흔히 좌굴을 일으키기 전에 다양한 초기부정형으로 인하여 발생할 수 있는 전좌굴변형 및 비선형 응력-변형률 관계를 포함한 비선형 비탄성 좌굴해석프로그램을 개발하였다. 이 방법은 다양한 지점조건과 임의의 하중조건을 가지는 박판구조물에 적용이 가능하며, 초기부정형과 잔류응력을 포함하고 있는 다양한 형태의 박판구조물의 비선형 좌굴거동을 보다 정확하게 예측할 수가 있었다.

Keywords

Acknowledgement

Supported by : 한국과학재단

References

  1. Journal of the Aeronautical Sciences v.16 Theory and Tests on the Plastic Stability of Plates and Shells Bijlaard, P.P.
  2. Applied Mathmatic Science v.27 A Practical Guide to Splines Carl de Boor
  3. Spline Finite Strip Method in Structural Analysis Fan, S.C.
  4. Development of Earthquake-Resistant Ultimate Strength Design Method for Concrete-Filled Steel Structures, NUCE Research Report No. 9401 Ge, H.;Usami, T.
  5. Journal of the Structural Division, ASCE v.104 no.ST11 Local, Distortional and Lateral Buckling of I-Beams Hancock, G.J.
  6. Plastic Buckling of a Rectangular Plate, Technical Note, NACA, No. 1530 Handelman, G.H.;Prager, W.
  7. Proceedings, Korean Society of Steel Constructions A Study on the Residual Stress of H and Box Sections Kim, U.S.;Kwon, Y.B.
  8. Computers and Structures v.49 no.3 Post-Buckling Behaviour of Thin-Walled Sections Undergoing Local and Distortional Buckling Kwon, Y.B,;Hancock, G.J.
  9. Thin-Walled Structures v.10 Inelastic Buckling of Channel Columns in the Distortional Mode Lau, S.C.W.;Hancock, G.J.
  10. Foundation of the Nonlinear Theory of Elasticity Novozhilov, V.V.
  11. Journal of Structural Engineering, ASCE v.118 no.11 Prebuckling Deflections and Lateral Buckling - Theory and Applications Pi, Y.L.;Trahair, N.S.
  12. International Journal for Numerical Methods in Engineering v.8 no.2 Buckling under Combined Loading of Thin Flat-Walled Structures by a Complex Finite Strip Method Plank, R.J.;Wittrick, W.H.
  13. Description of Stress-Strain Curves by Three-Parameters, Technical Note, NACA, No. 902 Ramberg, W.;Osgood, W.R.
  14. Proceding, International Conference on Composite Construction Structural Behavior of Concrete Filled Steel Box Sections Song, J.Y.;Kwon, Y.B.
  15. The Finite Element Method. Vols 1 & 2 Zienkiewicz, O.C.