한국가스학회지 (Journal of the Korean Institute of Gas)
- 제2권1호
- /
- Pages.74-82
- /
- 1998
- /
- 1226-8402(pISSN)
- /
- 2713-6922(eISSN)
입계부식법에 의한 공정설비 고온요소의 재질열화 평가
Assessment of Material Degradation of High-Temperature Components for Process Plant by Grain Boundary Etching Method
- Han Sang In (Korea Gas Safety Corporation) ;
- Yoon Kee Bong (Chung-Ang University) ;
- Kim Ji Yoon (Korea Gas Safety Corporation) ;
- Chung Se Hi (Chonbuk National University)
- 발행 : 1998.03.01
초록
공정플랜트 설비 고온요소의 재질열화 정도를 평가하기 위해서 사용되는 방법 중 입계 부식법은 시험절차가 간단하고 실제 플랜트에서의 적용이 용이하여 안전 및 수명진단시에 많이 이용되어 왔다. 본 논문에서는 오랜 기간 고온에서 사용된 화학플랜트 및 정유플랜트의 실기 요소에 입계부식법을 적용하여 재질의 고온에서의 장시간 노출에 의한 인성열화도를 평가한 결과를 제시하였다. 실제 요소의 열화도 측정변수로서는 입계부식법으로 측정한 격자절단비 (
The grain boundary etching method as a technique for assessing degradation of structural materials used at elevated temperature has received much attention since it is simple, inexpensive and easy to apply to real plant components. In this study, the technique is applied to some aged petroleum and chemical plant components such as reactors and drums. As a degradation parameter, intersection number ratio (
키워드