A Study on the Crack Growth Behavior of a Inclined Crack in a Non-Uniform Thickness Material

두께가 일정하지 않은 재료에서 경사진 균열의 성장거동에 관한 연구

  • 조명래 (인덕전문대학 기계설계과) ;
  • 표창률 (인덕전문대학 기계과) ;
  • 박종주 (인덕전문대학 기계설계과) ;
  • 고명훈 (대림전문대학 공업경영과)
  • Published : 1997.12.01

Abstract

The effect of geometry factors on the combined mode stress intensity factor behaviors of a slant crack in a non-uniform thickness material was analysed by 2-dimensional theoretical analysis. The analysis is based on the Laurent's series expansions of complex potentials where the complex coefficients of the series are determined from the compatibility and the equilibrium conditions of the thickness interface and the stress free conditions of the crack surface. In numerical calculations the perturbation technique is employed. The expressions for the crack tip stress intensity factor are given in the form of power series of dimensionless crack length $\lamda$, and the function of crack slant angle $\alpha$ and thickness ratio $\beta$. The results of numerical calculations for each problems are represented as the correction factors F($\lamda$, $\alpha$, $\beta$). The results clearly show the following characteristics : The correction factors of the combined mode stress intensity factors for a non-uniform thickness material can be defined in the form of F($\lamda$, $\alpha$, $\beta$). The stress intensity factor values for a given crack length are decreased with increase of thickness ratio $\beta$.

Keywords