초록
본 논문에서는 저압 배전용 전선퓨즈의 I-t 특성을 다루었다. 전선퓨즈 엘리먼트는 과전류 영역을 담당하는 낮은 온도 용융영역(LTME)과, 대전류 영역을 담당하는 높은 온도 용융영역(HTME)으로 나누어 진다. 이들부분에 의하여 퓨즈의 용단특성이 결정되는 것이다. 따라서 이들 부분에 대한 열적, 전기적인 특성을 시뮬레이션하므로서, 퓨즈 엘리먼트 설계의 타당성을 이론적으로 검증하였다. 유한요소법(Finite Element Method)을 이용하여 전선퓨즈의 I-t특성을 시뮬레이션 하였다. 그리고 시뮬레이션 결과와 실혐결과를 비교해 보았을 때 대전류영역과 소전류영역에서의 상당히 유사한 결과를 얻을 수 있었다.
In this paper, we deal with the I -t characteristic of low voltage distribution fuse (line fuse). That fuse element has two parts;One is low temperature melting element(LTME) to put up with over current and the other is high temperature melting element (HTME) which put up with large current. Melting charateristic of fuse is determined by L TME and HTME. So we verified their properties of fuse design, mathematically, by simulating the thermal and electric characteristics of each other. We simulated the I-t characteristic of line fuse by using the numerical method;Finite Element Method(FEM). Then, we could acquire very similar result at the HTME and L TME area when compared the simlation result with experimental one.