References
- J. Mater.Shap.Technol. v.6 no.1 Development of Multistage Sheet Metal Forming Analysis Method S.A. Majlessi;D. Lee
- Int. J.Mech. Sci. v.28 no.7 The Modeling of Sheet Metal Stampings R. Sowerby;J.L. Duncan;E. Chu
- Annals of the CIRP v.30 no.2 Computer Aids in Sheet Metal Engineering J.O. Duncan;R. Sowerby
- Proc. of 2nd ICTP v.1 Analysis and Design of flange Deformation in Deep Drawing of General Noncircular Cups D.Y. Yang;W.J. Chung;Y.Y. Cha;Y.J. Kim
- Int. J. Mach. Tool Des. Res. v.25 no.1 Deformation Analysis and Blank Design in Square Cup Drawing C.H. Toh;S. Kbayashi
- Bulletin of JSME v.29 no.249 On the Determination of the Optimum Blank shape of Nonaxisymmetric Drawn Cup by the Finite element Method' H. Iseki;T. Murota
- Int.J.Mech.Sci. v.34 no.7 Ideal Forming-I. Homogeneous deformation With Minimum Plastic Work K. Chung;O. Richmond
- Int. J. Mech. Sci. v.34 no.8 Ideal Forming-II. Sheet Forming with Optimum Deformation K. Chung;O. Richmond
- Trans. of the ASME v.61 The Mechanics of Ideal Forming K. Chung;O. Richmond
- Int. J. Mech. Sci. Blank Shape Design for A Planar Anisotropic Sheet Based on Ideal Forming Design Theory and FEM Analysis D. Chung;F. Barlat;J. c. Brem;D. J. Lege;O. Richmond
- Int. J. Plasticity v.9 A Deformation Theory of Plasticity Based on Minimum work Paths K. Chung;O. Richmond
- NUMIFORM'89 An Efficient Algorithm to Estimate the Large Strains in Deep Drawing J. L. Batoz;Y. Q. Guo;P. Duroux;J. M. Detraux
- Advanced Technology of Plasticity : Proc. of the 4th. Intermational Conference on Technology of Plasticity A Study on The Determination of Blank Shapes for Deep-Drawn Parts Li Shunping;Li Shuoben
- 한국소상가공학회 논문집 v.5 no.5 국소분할된 패치를 갖는 비매개변수 금형묘사법을 이용한 3차원 박 판성형공정 시뮬레이션 윤정환;양동열;유동진
- Math. Proc. Camb. Phil. Soc. v.81. 2. 5 Theoretical Plasticity of Texturded Aggregates Hill
- Metall. Trans v.6A A. K. Ghosh;S. S. Hecker
- Proceeding of The 2nd International confernce Numerical Simulation of 3-D Sheet Metal Forming Processes A. Makinouchi, E(eds.).;Nakamach(eds.)i;E. Onated(eds.);R. H. Wagoner(eds.)