초록
기존 프리플렉스 합성형 교량의 당면한 문제점은 하부 플랜지의 콘크리트 인장균열발생을 여하히 제어할 수 있느냐 하는 점이다. 본 논문에서는 이와 같은 문제점을 해결하기 위해 하부 플랜지 콘크리트부에 정적량의 PC강재를 도입하여 콘크리트에 압축력을 추가로 도입하므로써 프리플렉스 합성형이 전단면 압축(Full Prestressing)상태로 거동하도록 하는데 목표를 두고 검토하였다. 또한 이 과정에서 기존의 프리플렉스 합성형의 장점을 저해하지 않는 형고 및 단면의 유지 또는 개선과 경제성을 잃지 않도록 하였다. 여기서 개발한 새로운 개념의 합성형을 리프리스트레스트 프리플렉스 합성형(Represtressed Preflexional Composite Beam : 이하 RPF 합성형)이라 하고 해석, 설계, 시공의 전과정에 걸처서 작성된 유한요소해석프로그램(D.A.R.P.)을 이용하여 그 출력을 실물모형실험을 통해 비교, 검증하므로써 기존 프리플렉스 합성형의 문제점을 개선하면서도 경제성을 지는 거동특성을 확인할 수 있었다.
The conventional preflex beams are designed by the method of paritial prestressing and allow the tensile stresses at the lower concrete of beams. As a consequence, most of preflex beams experience the tensile cracks under the service loads. This study was conducted to develop the most effective preflex beams, which do not allow tensile stress under the service load, by introducing additional prestressing called 'represtressing' at the lower concrete of beams. The objective of the study was accomplished by developing a computer analysis and design program and conducting experiments. Using the developed computer program, standard sections of the represtressed preflex beams were determined by computer modeling. In the experiment, two actual size of represtressed beams were tested under the imitated service loads. The results of test have shown that the performance of the represtressed preflex beams is generally excellent. A remarkable improvement was made in the design of preflex composite beams. Since the represtressed preflex beams(RPF) do not experience the tensile cracks under the service loads, the use of this beam for the bridge structures will lead to easy bridge maintenance and management. Furthermore, due to the low beam depth, high clearance and economical design can be realized in the bridge design using RPF.