Geotechnical Engineering (한국지반공학회지:지반)

Korean Geotechnical Society (한국지반공학회)
권호 표지

Implicit Stress Integration of the Generalized Isotropic Hardening Constitutive Model : II . Verification

일반 등방경화 구성관계에 대한 내재적인 음력적분 : II. 검증

  • 오세붕 (정회원, 영남대학교 공과대학 토목공학과) ;
  • 이승래 (정회원, 한국과학기술원 토목공학과)
  • Published : 1996.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper verifies the accuracy and efficiency of the implicit stress integration algorithm for an anisotropic hardening constitutive model developed in a companion paper[Oh & Lee (1996)3. Simulation of undrained triaxial test results shows the accuracy of the method through an error estimation, and analyses of accuracy and convergence were performed for a numerical excavation problem. As a result, the stress was accurately integrated by the algorithm and the nonlinear solution was converged to be asymptotically quadratic. Furthermore nonlinear FE analysis of a real excavation problem was by performed considering the initial soil conditions and the in-situ construction sequences. The displacements of wall induced by excavation were more accurately estimated by the anisotropic hardening model than by the Cam-clay model.

본 연구에서는 동반논문(오세붕 & 이승래, 1996)에서 정식화한 비등방경화 구성모델에 대한 내재적인 응력적분 알고리즘의 정확성과 효율성을 검증하였다. 비배수 삼축압축시험경로에 대한 오차평가를 통하여 정확도해석을 수행하였고 수치적인 굴착해석예제를 수행함으로써 정확도 및 수렴도를 분석하였다. 그 결과 제안된 알고리즘이 비등방경화 구성관계에 대하여 음력을 정화하게 적분하고 Newton 법을 이용한 비선형 해석시에 점근적인 2차 수렴도를 확보함을 알 수 있었다. 그리고 이러한 검증을 토대로 지반의 초기조건 및 시공단계를 고려한 유한요소법을 이용하여 실제 굴착문제를 해석하였다. 비등방경화 구성관계를 이용함으로써, 추정된 벽체의 변위는 Cainflay모델에 비하여 실제와 더 유사한 해석결과를 얻을 수 있었다.

Keywords

References

  1. 박사학위논문, 한국과학기술원 점토의 비등방경화 구성모델에 관한 연구 오세붕
  2. 한국지반공학회지 v.10 no.3 일반 등방경화규칙에 의거한 점토의 비등방 탄소성 구성모델 이승래;오세붕
  3. 한국지반공학회지 v.12 no.4 일반 등방경화 구성관계에 대한 내재적인 응력적분: Ⅰ, 정식화 오세붕;이승래
  4. Geotech. Res. Report The Properties of San Francisco Bay Mud at Hamilton Air Force Base, California Bonaparte, R.;Mitchell, J.K.
  5. J. Geotechnical Engineering Div. v.116 Analysis of Incremental Excavation Based on Critical State Theory Borja, R.I.
  6. Computer Methods in Applied Mechanics and Engineering v.85 One-Step and Linear Multistep Methods for Nonlinear Consolidation Borja, R.I.
  7. Computer Methods in Applied Mechanics and Engineering v.86 Composite Newton-PCG and Quasi-Newton Iterations for Nonlinear Consolidation Borja, R.I.
  8. Int. J. Numerical and Analytical Methods in Geomechanics v.13 Numerical Simulation of Excavation on Elasto-Plastic Soils Borja, R.I.;Lee, S.R.;Seed, R.B.
  9. J. Geotechnical Engineering Div. v.120 Multiaxial Cyclic Plasticity Model for Clays Borja, R.I.;Amies, A.P.
  10. J. Geotechnical Engineering Div. v.120 Vibration of Foundations on Incompressible Soils with No Elastic Region Borja, R.I.;Wa, W.-H.
  11. J. Geotechnical Engineering Div. v.110 Measured Behavior of Braced Wall in Very Soft Clay Clough, G.W.;Reed, M.W.
  12. J. Geotechnical Engineering Div. v.117 Finite Element Analysis of HDR-4 Excavation Finno, R.J.;Harahap, I.S.
  13. J. Engineering Mechanics Div. v.113 Numerical Implementation of Plasticity Model for Cohesive Soils Herrmann, L.R.;Kaliakin, A.M.;Shen, C.K.;Mish, K.D.;Zhu, Z.-Y.
  14. Thesis presented to Stanford Univ., Stanford, Calif. in partial fulfillment of requirment for the degree of Doctor of philosophy Non-Linear Elasto-Plastic Finite Element Analysis of Braced Excavations in Clays Lee, S.R.
  15. Thesis presented to Stanford Univ., Stanford, Calif. in partial fulfillment of requirment for the degree of Engineer Observed Behavior of an Excavation in an Unusually Soft San Francisco Bay Mud Deposit Reed, M.W.
  16. J. Geotechnical Engineering Div. v.119 Analysis of Deep Excavation in Boston Whittle, A.J.;Hashash, M.A.;Whitmann, R.V.