압상토의 3차원 거동

Three-Dimensional Behavior of Granular Soil

  • 발행 : 1995.03.01

초록

A series of cubical triaxial tests with three independent principal stresses was per- formed on Baekma river sand( # 40~100). It was found that the major principal strain at failure remained approximately constant for b values larger than about 0.3 for both the drained and undrained condition, and thereafter increased as b value decreased. The test results showed that the direction of the strain increment at failure form acute angles with the failure surfaces for both the drained and undrained condition. The results were thus not in agreement with the normality condition from classic plasticity theory. Howev- er, it was found that the projections of the plastic strain increment vectors on the octahe- dral plane were perpendicular to the failure surface in that plane. Failure strength in terms of effective stress anlaysis was greatly influenced by the variation of intermediate principal stress and so was failure criterion. The effective stress failure surfaces for both the drained and undrained condition were estimated quite well by use of Lade's failure criterion.

키워드

참고문헌

  1. Geotechnical Testing Journal, GTJO-DJ v.1 no.2 Cubical Triaxial Apparatus for Soil Testing Lade,P.V.
  2. Journal of ths Soil Mechannics and Foundations Division v.99 no.SM10 Cubical Triaxial Tests on Cohesionless Soil Lade,P.V.;Duncan,J.M.
  3. Int. J. Solids and Structs v.13 Elasto-Plastic Stress Strain Theory for Cohesionless Soil with Curved Yield Surfaces Lade,P.V.
  4. Journal of the Geotechnical Engineering Division v.105 no.GT2 Three Dimensional Behaviour of Remolded Clay Lade,P.V.;Musante,H.M.
  5. Computers and Geotechnics v.5 no.4 Single Hardening Constitutive Model for Frictional MaterialsⅠ. Plastic potential function Kim.M.K.;Lade,P.V.
  6. Computers and Geotechnics v.6 no.1 Single Hardening Constitutive Model for Frictional MaterialsⅡ. Yield Criterion and Plastic Work Contours Lade,P.V.;Kim,M.K.
  7. Computers and Geotechnics v.6 no.1 Single Hardening Constitutive Model for Frictional Materials Ⅲ. Comparisons with Experimental Data Lade,P.V.;Kim,M.K.
  8. International Journal for Numerical and Analytical Methods in Geomechanics v.4 General Basis for Yield, Failure and Potential Functions in Plasticity Desai,C.S.
  9. Journal of Engineering Mechanics Division v.110 no.9 A Constitutive Model for (Geologic) Materials Desai,C.S.;Faruque,M.o.
  10. Constitutive Law for Engineering Materials Desai,C.S.;Sirwardane,H.J.
  11. A Hierarchical Approach for Constitutive Geomechanics v.10 no.3 Desai,C.S.;Somasundaram,S.;Frantziskonis,G.
  12. 大韓土木學會 論文集 v.8 no.2 中間主應力이 過壓密 粘土의 擧動에 미치는 影響 洪元杓
  13. 大韓土質工學會誌 v.6 no.3 壓縮性 모래의 3次元 剪斷强度 特性 朴炳基;鄭鎭燮;林成喆
  14. 大韓土木學會 論文集 v.10 no.3 壓縮性 모래의 3次元 變形 擧動 朴炳基;鄭鎭燮;林成喆
  15. 大韓土木學會 學術發表會 論文集 立方體三軸試驗機의 試作 康權修;李汶樹;鄭鎭燮;朴炳基
  16. 圓光大學校 博士學位論文 彈塑性 構成모델에 의한 粒狀土의 擧動解析 金燦記