Abstract
A 300 meter class ROV(CROV300) is composed of three parts : a surface unit, a tether cable and an underwater vehicle. The vehicle controller is based on two processors : an Intel 8097-16-bit one chip micro-processor and a Texas Instruments TMS320E25 digital signal processor. In this paper, the surface controller, the vehicle controller and peripheral devices interfaced with the processors are described. These controllers transmit/receive measured status data and control commands through RS422 serial communication. Depth, heading, trimming, camera tilting, and leakage signals are acquired through the embedded AD converters of the 8097. On the other hand, altitude of ROV and lbstacle avoidance signals are processed by the DSP processor and periodically fetched by the 8097. The processor is interfaced with a 4-channel 12-bit D/A converter to generate control signals for DC motors an dseveral transistors to handle the relays for on/off switching of external devices.