The Dynamic Characteristics of a Two Phase Fluidized Beds

이상 유동층 반응기의 동특성에 관하여

  • Suh, Myung-Gyo (Department of Food Industry, Dongeui Technical Junior College) ;
  • Suh, Jung-Ho (Materials Development Research Institute, Suhryung Co., Ltd.) ;
  • Kang, Jun-Soo (Department of Food Industry, Dongeui Technical Junior College)
  • 서명교 (동의공업전문대학 식품공학과) ;
  • 서정호 ((주)서륭 재료 개발연구소) ;
  • 강준수 (동의공업전문대학 식품공학과)
  • Published : 1993.06.01

Abstract

The purpose of this research was to investigate fluidization characteristics of three solid particles, correlations between voidage and superficial velocity. The inside diameter of a column did not affect the fraction void-superficial velocity relationship for fluidization systems which was obtained as follows: $\frac{u}{u_t}={\varepsilon}^{3.703}----Sea\;Sand$ $\frac{u}{u_t}={\varepsilon}^{3.5665}----long\;Exchange$ $\frac{u}{u_t}={\varepsilon}^{4.066}----GAC$ And the sphericial type media is good for fluidized systems as it maintains low voidage. Actually, if biofilm attached to media (bioparticle), the density became lower in fluidized bed biofilm reactor. Therefore, as the density of media become higher, it is easy to maintain fluidized beds.

본 실험의 목적은 공극률과 상향유속의 관계에서 세입자의 유동특성을 고찰하는 데 있다 Column 내경은 유동층의 유속과 공극률과의 관계에 큰 영향을 미치지 못했으며 유속과 공극률과의 관계는 다음과 같다. $\frac{u}{u_t}={\varepsilon}^{3.703}$----모래$\frac{u}{u_t}={\varepsilon}^{3.5665}$----이온 교환수지$\frac{u}{u_t}={\varepsilon}^{4.066}$---GAC 또 유동층 매질입자는 구형을 사용하는 것이 일정유속에서 공극률을 낮게 유지할 수 있어 좋았고 실제로 미생물막 유동층 반응기에서는 미생물막이 매질에 부착되면 비중이 감소하므로 매질의 비중이 높을수록 유동층을 유지하기가 쉽다.

Keywords