Describing Function Method를 이용한 송전선의 전선도약(Galloping)현상 해석에 관한 연구

The Analysis of Power Line Galloping by Describing Function Method

  • 노창주 (한국해양대 기관공학과) ;
  • 박한석 (부산공업대 전기공학과) ;
  • 변기식 (부산공업대 제어계측공학과)
  • 발행 : 1992.04.01

초록

Estimates of maximum amplitudes of conductor galloping are needed in order to determine appropriate phase-to-phase clearances on the overhead lines. One approach to obtaining these estimates is through the use of mathematical models of conductor galloping. Unfortunately, the models that consider both vertical conductor motion (Den Hartog type) and torsional conductor motion are often too complex for practical use. However, the estimates of maximum amplitude obtained from galloping models that assume only vertical (Den Hartog type) conductor motion tend to be too conservative. This paper presents the DF method to obtain the estimates of the amplitude and the frequency of galloping limit cycle, along with the wind pressure at which they occur, from a nonlinear dynamic model that considers both Den Hartog type and torsional conductor motion. From these results, the useful data for the line design guide and further insight into the mechanism of the conductor galloping are obtained.

키워드