한국표면공학회지 (Journal of the Korean institute of surface engineering)

  • 제20권3호
  • /
  • Pages.95-105
  • /
  • 1987
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지

Inconel 600에 있어서 Al 및 Al-Cr擴酸浸透 被覆處理에 따른 被覆層의 特性과 耐蝕性

Microstructure and Hot Corrosion Resistance of Aluminide and Chromium-Aluminide Coatings for Inconel 600

  • 정린상 (慶北大學校工科大學金屬工學科) ;
  • 박경채 (慶北大學校工科大學金屬工學科) ;
  • 박수호 (慶北大學校工科大學金屬工學科)
  • Chung In-Sang (Dept. of Metall. Engng., Kyungpook National University) ;
  • Park, Kyeung-Chae (Dept. of Metall. Engng., Kyungpook National University) ;
  • Park, Soo-Ho (Dept. of Metall. Engng., Kyungpook National University)
  • 발행 : 1987.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

For the purpose of improving the hot corrosion resistance of Ni-base superalloy, Inconel 600, aluminide and chromium-aluminide coatings by pack cementation process were studied. The morphology of these coatings is dependent on the type of process employed. And their overall composition depends on the composition of the base alloy and on the nature of the cement. Therefore the different aluminide and chromium-aluminide coatings obtained on a superalloy do not possess the same resistance to oxidation and hot corrosion. The mechanisms governing the formation of the coatings and the composition of the coating were varied by pack composition and temperature, and cyclic hot corrosion resistance of the auluminide coating formed by one-step process was inferior to that of the coating formed by two-step process. and Cr-Al composite coating showed good resistance for cyclic hot corrosion.

키워드