주행조건에 따른 판형교 지점부 거동 측정 분석

Measurement and Analysis about Behavior of Steel Plate Girder in Vicinity of Support, According to Driving Condition

  • 이승열 (한국철도공사 연구원, 기술연구처) ;
  • 김남홍 (한국철도공사 글로벌비지니스센터) ;
  • 우병구 (한국철도공사 연구원, 기술연구처) ;
  • 나강운 (한국철도공사 시설기술단 시설계획처)
  • 발행 : 2011.05.26

초록

A number of conventional railway bridge is more than 2600. Non-ballast plate girder bridge is about 700 and this is 27% of all bridge numbers. Non-ballast plate girder has advantages that self load is more lighter than moving load and construction cost is more inexpensive than concrete bridge. But non-ballast plate girder has disadvantages that vibration and noise is bigger than concrete bridge. This study had analyzed behavior of non-ballast plate girder according to the arrangement of supports and driving conditions to review the proper arrangement of support. Measurements were performed in single line and disel locomotive of 7400type were used as test vehicle. The vehicle's driving conditions are as follows; Change of driving direction, Constant speed driving, Deceleration driving, Acceleration driving. Main measurement contents were horizontal displacement and vertical vibration acceleration in girder of vicinity support. Results of measurement are as follows; In case that a vehicle drives from fixed support to movable support, vertical vibration acceleration of the girder was smaller than opposition case.

키워드