한국태양에너지학회:학술대회논문집
- 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
- /
- Pages.203-208
- /
- 2008
전산유체역학을 이용한 직접 접촉식 히트파이프의 응축부 형상에 따른 성능비교
Performance Comparison on the Condenser Shapes of Direct Contact Heat Pipe using CFD
- 고요한 (인하대학교 대학원 기계공학과) ;
- 강경문 (인하대학교 대학원 기계공학과) ;
- 서태범 (인하대학교 기계공학과)
- Ko, Jo-Han (Dept. of Mechanical Eng., Graduate School, Inha University) ;
- Kang, Kyung-Mun (Dept. of Mechanical Eng., Graduate School, Inha University) ;
- Seo, Tae-Beom (Dept. of Mechanical Eng., Inha Universitv)
- 발행 : 2008.04.12
초록
The purpose of this study is to compare the different shapes of condenser of the direct contact heat transfer from the heat pipe condenser to the receiving water using CFD. The heat transfer from the working fluid of the heat pipe to receiving fluid flows through the manifolder is one of the important part in evacuated solar collector system. The retrenchment of the thermal resistance between the heat pipe and the manifolder could increase the thermal performances of the whole system. Recently, direct heat transfer from the heat pipe condenser wall to the receiving water was suggested and accompanied experiments were achieved. This experiment shows the better performances of the direct contact heat transfer analogically. Preceding calculations are carried out for the performance comparison: mesh dependence test, discretization method test and equation model test. with these preceding tests, 4 different shapes of condenser are compared and each case were set up for the same heat flux at the condenser wall. The calculation result shows that the efficiency of the extended surface condenser shape is 10% higher then the that of the others.