Development of Damage Estimation Method using Sensor of Multiple Function in RC Beam

철근 콘크리트 보에서의 다기능 센서를 이용한 손상 추정법 개발

  • 김이성 (경북대학교 건설공학부) ;
  • 박강근 (부산대학교 산업건축학과) ;
  • 김화중 (경북대학교 건설공학부)
  • Published : 2008.05.02

Abstract

Performance degradation of concrete structures is generally caused by structural deteriorations, such as cracks. It may result in serious defects of concrete structures. Methods of damage detection are used a visual angle of human or non-destructive test, and they are using various sensors. Problems of crack damage detection are occurred to directions of cracks by using 1 axial type of accelerometer in concrete element. In addition, these sensors are not used to occurring fire in RC building. Thermocouple sensors are able to using measurement of temperature in fire, and then deformations of main element and structures are not used. In this study, fundamental studies for development of multiple function sensor using 3 axial type of accelerometer and electric resistance property of thermocouple sensors are discussed estimation to stability of structures when happened form active load or fire, and so on.

콘크리트는 균열손상으로 인하여 구조적 품질이 저하되며 결국, 이는 구조물에 심각한 영향을 준다. 이러한 손상을 검사하는 방법으로 육안으로 확인하거나 비파괴 시험법을 주로 이용하고 있으며, 비파괴시험법은 다양한 센서를 이용한다. 이러한 대부분의 센서는 1축에 대한 측정을 하기 때문에 방향성이 불규칙한 균열 손상을 측정하기에는 어려움이 많다. 또한, 화재가 발생하면 이러한 센서는 사용할 수가 없다. 화재발생시 사용할 수 있는 센서는 열전대이며, 이러한 센서는 온도측정을 위해 사용되므로 화재손상으로 발생된 주요 부재 및 구조물의 변형을 측정할 수 없다. 본 연구는 3축 가속도센서와 열전대 센서의 전기 저항적 특성을 이용하여, 외력 및 화재발생으로 구조물의 손상 전과 손상 후의 안전성을 검토할 수 있는 다기능센서를 개발하기 위한 기초적 연구이다.

Keywords