Proceedings of the KSME Conference (대한기계학회:학술대회논문집)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Bending Properties of ZnO Nanorod using Nano-Manipulator

나노조작기를 이용한 ZnO 나노막대 굽힘 물성 평가

  • 전상구 (부경대학교 대학원 안전공학과) ;
  • 장훈식 (한국표준과학연구원 에너지인프라 연구단) ;
  • 권오헌 (부경대학교 안전공학부) ;
  • 남승훈 (한국표준과학연구원 에너지인프라 연구단)
  • Published : 2008.11.05
Download PDF
⟨ Previous Next ⟩

Abstract

The bending test of an individual ZnO nanorod was performed with a nano-manipulator and a force sensor inside the scanning electron microscope (SEM), and the bending properties of ZnO nanorod were also discussed. The ZnO nanorod used in this experiment was fabricated by means of solution base process. The force sensor used for bending test of ZnO nanorod was typed with cantilever. The force sensor was mounted on the nano-manipulator. The nano-manipulator was controlled and manipulated by a personal computer. The each end of an individual ZnO nanorod was attached on the rigid support and the tip of the force sensor with an electron beam exposure, and then the bending test was carried out by controlling of the nano-manipulator. The bending modulus of a ZnO nanorod was calculated at 69.35GPa after the bending test.

Keywords