전력전자학회:학술대회논문집 (Proceedings of the KIPE Conference)
- 전력전자학회 2006년도 전력전자학술대회 논문집
- /
- Pages.456-458
- /
- 2006
옥내 전력선 채널 분석
Channel Analysis of inside PLC
- 홍덕표 (충북대학교 대학원 전기공학과) ;
- 이진목 (충북대학교 대학원 전기공학과) ;
- 김수철 (충북대학교 대학원 전기공학과) ;
- 최재호 (충북대학교 대학원 전기공학과) ;
- 홍현문 (통일부 남북경제협력국 남북경협2팀)
- Hong Duc-Pyo (School of Electrical and Computer Engineering in Chungbuk National University) ;
- Lee Jin-Mok (School of Electrical and Computer Engineering in Chungbuk National University) ;
- Kim Soo-Cheol (School of Electrical and Computer Engineering in Chungbuk National University) ;
- Choi Jae-Ho (School of Electrical and Computer Engineering in Chungbuk National University) ;
- Hong Hyun-Mun (Ministry Inter-Korean Economic Cooperation Burea u, Inter-Korean Economic Cooperation 2 Team)
- 발행 : 2006.06.01
초록
Power line communication: PLC which easy to install at anywhere near outlet for electric machine. PLC uses transmission line for voltage of which is 60 Hz. Signals don't affect to electric machine in PLC because they are very small voltage. One of the important thing is the processes of adding signal to power line and extracting the signal from power line, the other is to choose the strong modulation method which sends signals long distance without loosing in PLC channel. but PLC channel have very high and variable noise and attenuation and then it is very hard to transmit optimally between the transmitter and the receiver. After all, impedance and noise problems of PLC channel must be overcame. Noises of 2 kinds which are AWGN abd impulse noise and attenuation are orated. To overcome the noise. Recently, Multi-carrier Modulation: MCM methods like as OFDM and DMT which are divide the channel into many sub-channel have been studied. those are powerful communication methods in PLC. In this paper, PLC channels made up of 3 numbers of noise and attenuation are simulated for getting BER by Matlab simulink.
키워드