Active Vibration Control Experiment on Cylindrical Shell equipped with MFC Actuators

MFC 작동기를 이용한 실린더 쉘의 능동진동제어 실험

  • 배병찬 (동국대학교 대학원 기계공학과) ;
  • 정문산 (동국대학교 대학원 기계공학과) ;
  • 곽문규 (동국대학교 기계공학과)
  • Published : 2006.11.16

Abstract

This paper is concerned with the active vibration control experiment on cylindrical shell equipped with Macro Fiber Composite(MFC) actuators. The MFC actuators were glued to the cylindrical shell in circumferential directions. To verify the theoretical result, vibration test using impact hammer and accelerometer was carried out. It was found from experiments that theoretical result predicts experimental result to some extent. The positive position feedback controllers were designed and applied to the test article. It was observed that the resonant amplitude of the fundamental mode was reduced by 20dB thus achieving active vibration control. The active vibration control of the response subject to non resonant excitation has been of interest. We developed the combination of the positive position feedback controller which can cope with the fundamental mode and the positive position feedback controller which can counteract the external disturbance with non resonant frequency. It was found from experiments that the hybrid controller can suppress the vibration amplitude successfully.

Keywords