한국전기전자재료학회:학술대회논문집 (Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference)

한국전기전자재료학회 (The Korean Institute of Electrical and Electronic Material Engineers)
권호 표지

스크린 인쇄법에 의한 용존 산소센서의 제조 및 특성

Fabrication of Dissolved Oxygen sensors by Screen Print Method and Characteristic

  • 정경진 (경남대학교 전기전자공학부) ;
  • 이성필 (경남대학교 전기전자공학부)
  • Jung, Kyung-Jin (Department of Electrical and Electronic Engineering, Kyungnam Univ.) ;
  • Lee, Sung-Pil (Department of Electrical and Electronic Engineering, Kyungnam Univ.)
  • 발행 : 2003.07.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The dissolved oxygen sensor of thick film type was fabricated by screen print method and measured the characteristic, reference electrode used Ag/AgCl, and working electrode used Pt. The devices are continuously powered at potential of $0.7V{\sim}0.8V$ versus Ag/AgCl reference electrode and results indicated that the response characteristic of sensor was $1.002{\mu}A{\sim}19.792{\mu}A$ for thirty seconds. we can know that it is good linearity when compared with of existent dissolved oxygen meter. Therefore sensor fabricated excels sensitivity for dissolved oxygen and will be considered to be applied typically because the price is costly.

키워드