Proceedings of the Korea Committee for Ocean Resources and Engineering Conference (한국해양공학회:학술대회논문집)
- 2001.10a
- /
- Pages.97-102
- /
- 2001
Study on Model Test Technique of Deepwater Moorings: A Hybrid Modeling of A OTEC Mooring System
심해계류 모형시험 기법 연구: OTEC 계류시스템의 혼합형 모델링
-
Hong, Sup
(Korea Research Institute of Ships & Ocean Engineering/ KORDI) ;
- Kim, Jin-Ha (Korea Research Institute of Ships & Ocean Engineering/ KORDI) ;
-
Hong, Seok-Won
(Korea Research Institute of Ships & Ocean Engineering/ KORDI) ;
-
Hong, Sa-Young
(Korea Research Institute of Ships & Ocean Engineering/ KORDI) ;
- Jalihal, Purnima (National Institute of Ocean Technology)
-
홍섭
(한국해양연구원 해양시스템안전연구소) ;
- 김진하 (한국해양연구원 해양시스템안전연구소) ;
-
홍석원
(한국해양연구원 해양시스템안전연구소) ;
-
홍사영
(한국해양연구원 해양시스템안전연구소) ;
- Published : 2001.10.01
Abstract
This paper describes an investigation how to carry out model tests of deepwater moorings exceeding the basin depth range. A hybrid mooring model, a combination of mooring lines scaled model and a couple of linear springs, is taken into account as an equivalent substitute of a full depth mooring system. Such an idea is applied to the model test of an OTEC mooring system to be installed in 1000m deep ocean. A 1/25 scaled model test of surface vessel and the upper part of mooring system is performed at ocean engineering basin. Possibility and limitation of the hybrid mooring modeling is discussed.
Keywords