한국해양공학회:학술대회논문집 (Proceedings of the Korea Committee for Ocean Resources and Engineering Conference)
- 한국해양공학회 2000년도 추계학술대회 논문집
- /
- Pages.171-177
- /
- 2000
프레스 접합성형 GMT-Sheet의 크리프 특성
Creep Behavior of Press Joined Molding GMT-Sheet
- 최유성 (조선대학교 대학원 정밀기계공학과) ;
- 김혁 (조선대학교 대학원 정밀기계공학과) ;
- 강명구 (조선대학교 대학원 정밀기계공학과) ;
- 이동기 (조선대학교 기계공학부) ;
- 한길영 (조선대학교 기계공학부) ;
- 김이곤 (국민대학교 기계자동차공학부)
- Choi, Yu-Seong (Dept. of Precision Mechanical Engineering, Chosun University) ;
- Kim, Hyuk (Dept. of Precision Mechanical Engineering, Chosun University) ;
- Kang, Myoung-Goo (Dept. of Precision Mechanical Engineering, Chosun University) ;
- Lee, Dong-Gi (School of Mechanical Engineering, Chosun University) ;
- Han, Gil-Young (School of Mechanical Engineering, Chosun University) ;
- Kim, E-Gon (School of Mechanical & Automobile, Kookmin University)
- 발행 : 2000.10.01
초록
It is essential to understand the creep behavior, which shows how long the characteristics of material maintains because press joined molding GMT-Sheet for recycle is usually used in the severe environment. In this study, we predict joining strength of GMT-Sheet for recycle, when lap length was changed. and we will investigate how compression ratio have an effect on creep behavior in press joined molding. The result of experiment of forming condition concerned with joining problem of GMT-Sheet is as followings joining efficiency. of GMT-Sheet, increases as lap joint length I, increases. Increase of compression ratio causes decrease o f joining efficiency after of GMT-Sheet joining. As the result of creep test, GMT-Sheet is easily damaged in high temperature range, because it is sensitive to the temperature
키워드