• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.53-67
• /
• 2003

In this paper, a new systematic method will be introduced, in which a Rock-mass Prediction System(RPS) predicts the geological conditions and rock mass movements before tunnel excavation and the appropriate counter-measures are taken in the expected weak zones during tunnel construction. The Rock-mass Prediction System(RPS) consists of the LIM, a horizontal con drilling and a seismic exploration method (TSP/HSP). In the Rock-mass Prediction System(RPS), the seismic exploration method (TSP/HSP) gives information on the locations of the weak zones such as major faults and voids in wide-range, and the horizontal core drillings are utilized to find exact location and widths of the faults or voids near the weak zones which was predicted by the seismic exploration method (TSP/HSP). The LIM is used to find the hardness of the rock mass and small weak zones near the excavation face. The Rock-mass Prediction System(RPS) was successfully applied to the Sol-An Tunnel and the effectiveness of the system was verified.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.3
• /
• pp.23-29
• /
• 1992

This paper discussed the effect of cold on the forge and animal production and reviewed the main problems and present developement of grasslands farming in winter cold zones in China. It is considered that climatic factor,sepecially cold winter conditon, is the ,main limitint factor of the frasslands productionm which cause the seasonal unballance of forage prduction and forage supply in winter cold zones in china. Present ang future development of grasslands farming in winter cold zones are discussed ditailly.

• Journal of the Korean Society of Safety
• /
• v.26 no.3
• /
• pp.63-68
• /
• 2011

Access-control of hazard zone in a steel manufacturing industry is studied in terms of safety management. Based on the results of risk evaluation for hazard zone, three risk zones with low, middle and high level are categorized. These zones have different color door and locking shape depending on their risk levels. At the high level, red door and key-based locking system are employed to accessed-controled path. Furthermore, tagout, lockout, interlock system for emergency stop, warning and flashing are also introduced. New standardized procedure of access-control for various hazard zones, which could help to greatly contribute to the prevention of accidents in advance, is proposed considering the risk level and the condition of given hazard zones. The standardized procedure of access-management suggested in this study will take an effective role as one of safety guide lines for hazardous workshop of manufacturing industries.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.261-268
• /
• 2022

In road work zones, pedestrian workers' habituated inattention to warning alarms from construction vehicles can lead to fatal accidents. Previous studies have theorized that human factors such as personality traits may affect workers' inattentiveness to workplace hazards. However, there has been no study that directly examined how road construction workers' personality traits affect their attention to warning alarms within a work zone and the likelihood of engagement in a struck-by accident. This study examines how workers' sensation-seeking (especially boredom susceptibility) is related to inattention to warning alarms while performing a task in road work zones. An experiment with actual road construction workers was conducted using a virtual road construction environment. Workers' attention to repeatedly presented warning alarms was measured using eye-tracking sensors. In response to workers' frequent inattentive behaviors, a virtual accident was simulated. Results revealed a significant association between boredom susceptibility and workers' engagement in the virtual accident, a consequence of inattentiveness to warning alarms. The findings suggest that workers' personality traits predispose them to tune out warning alarms and become vulnerable to accidents in road work zones. The findings of this study can be used to develop targeted interventions aimed at preventing workers' inattention to repeatedly exposed workplace hazards, thereby contributing to reducing fatal accidents in road work zones.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.952-959
• /
• 2022

Active construction work zones will result in longer travel time and/or longer travel distances for road users because of reduced speed limits and/or detours. This results in increased fuel consumption and increased emissions of harmful gases such as Carbon Monoxide (CO), Nitrogen Oxides (NOx), and Sulfur Oxides (SOx), which causes discomfort to the environment and road users around the work zone. The impact of such emissions should be considered while designing work zones or determining the number of days the roadway will be allowed to be closed partially or fully. This study develops a methodology to compute additional road user costs associated with such work zones. To achieve this goal, a) an extensive literature review is conducted, b) a framework to compute emission cost is developed, c) emission rates are computed for all counties (95) of the state of Tennessee, and d) a case study is conducted to demonstrate the use of the framework to estimate the additional impact of emission because of the work zone. For the case study conducted, the emission cost was computed to be $10,653.60 for the duration of the project. State DOTs can account for such road user costs while selecting contractors using A+B bidding. Accounting for such impact of emission will also indicate the agency's willingness to consider sustainability as a part of the business practices.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.47 no.2
• /
• pp.190-197
• /
• 2024

By the recent fast growth of e-commerce markets, it has been stimulated to study order picking systems to improve their efficiency in distribution centers. Many companies and researchers have been developed various types of order picking systems and pursued the corresponding optimal operation policies. However, the performances of the systems with the optimal policies often depend on the structures of the centers and the operation environments. Based on a simulation model that mimics a unique zone picking system operated by a real company in the Republic of Korea, this study compares several operation policies and finds the most appropriate order selection rule and worker assignment policy for the system. Under all scenarios considered in this study, simulation results show that it is recommendable to assign more efficient workers to the zones with heavier workload. It also shows that selecting the order with the maximum number of non-repeatedly visited zones from the order list provides the most consistent and stable performances with respect to flow time, makespan, and utilization of the system even under the scenario with the breakdown zones. On the other hand, selecting the order with the minimum ratio of penalty to the number of zones performs the worst in all scenarios considered.

• Corrosion Science and Technology
• /
• v.14 no.2
• /
• pp.54-58
• /
• 2015

A heavy oil of low quality has been mainly used in the diesel engine of the merchant ship as the oil price has been significantly jumped for several years. Thus, a combustion chamber of the engine has been often exposed to severely corrosive environment more and more because temperature of the exhaust gas of the combustion chamber has been getting higher and higher with increasing of using the heavy oil of low quality. As a result, wear and corrosion of the engine parts such as exhaust valve, piston crown and cylinder head surrounded with combustion chamber are more serious compared to the other parts of the engine. Therefore, an optimum repair welding for these engine parts is very important to prolong their lifetime in a economical point of view. In this study, 1.25Cr-0.5Mo filler metal was welded with SMAW method in the forged steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected and base metal zones were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. The weld metal and base metal zones exhibited the highest and lowest values of hardness respectively. And, the corrosion resistance of the heat affected and weld metal zones was also increased than that of the base metal zone. Furthermore, it appeared that the corrosive products with red color and local corrosion like as a pitting corrosion were more frequently observed on the surface of the base metal zone compared to the heat affected and weld metal zones. Consequently, it is suggested that the mechanical and corrosion characteristics of the piston crown can be predominantly improved by repair welding method using the 1.25Cr-0.5Mo electrode.

• Journal of Environmental Impact Assessment
• /
• v.14 no.6
• /
• pp.403-413
• /
• 2005

The environmental conservation-targeted zoning in urban planning process has been functioned as securing a ecological core in urban green spaces management. Hence, the designation of conservation zones in land use planning is considered as a key task to achieve the sustainability of urban planning. The recently introduced pre-environmental review system for the proposed urban plan, by which the conservative measures for urban ecosystem and landscape are suggested in aspect of environmental impact mitigation, has played an active role in enhancing the environmental performance degraded by wide range of development pressure. This study is aimed at drawing out of objective criteria for designation of environmental conservation zones, which can be applied to urban planning establishment and also to environmental assessment process. To achieve this goal, the study adopted the following methods; pre-study review, analysis of existing official opinion statements released by the Ministry of Environment, contents analysis of related laws, and experts' panel discussions on the finally arranged criteria. The results of this research can be summarized as follows: First, the total criteria of 48 are drown out with categorizing into environment-ecological and socio-cultural sectosr. Second, the environment-ecological part is composed of 33 criteria such as vegetation, animal, geomorphology, watershed, environmental land suitability, and etc. Here, the Degree of Ecological Function, Degree of Environmental Land Suitability, and Vegetation Map are mainly utilized. Third, the 15 socio-cultural criteria relating to the history, social ecology and landscape have such components as forest around relics, Seo-won(school), castle, tomb, landmark, skyline, natural landscape, and etc. Forth, these individual criteria can be applied to designation of each conservation zones among total of 11 conservation areas(or districts).

• Journal of Ocean Engineering and Technology
• /
• v.26 no.4
• /
• pp.64-69
• /
• 2012

Laser welding was carried out on austenitic 304 (STS 304) and 22 APU stainless steels. In this case, the differences between the corrosion characteristics of the welding zones of the two stainless steels were investigated using electrochemical methods. The Vickers hardness values of the weld metal (WM) zones in both cases, the STS 304 and 22 APU stainless steels, showed relatively higher values than those of other welding zones. The corrosion current densities of the heat affected zone (HAZ) of the 22 APU and the base metal (BM) zone of the STS 304 exhibited the highest values compared to the other welding zones. It is generally accepted that when STS 304 stainless steel is welded using a general welding method, intergranular corrosion is often observed at the grain boundary because of its chromium depletion area. However, when laser welding was performed on both the STS 304 and 22 APU stainless steels, no intergranular corrosion was observed at any of the welding zones. Consequently, it is considered that the intergranular corrosion of stainless steel can be controlled with the application of laser welding.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.6
• /
• pp.93-105
• /
• 2017

This study aims to establish the integrated system of national protected areas by identifying OECMs which are not officially recognized as protected areas, but effectively and enduringly deliver the conservation of biodiversity and ecosystem service to expand them up to the level recommended by the international community. In order to identify them, candidates for OECMs were listed and it was developed a three-step systematic screening tool based on preconditions, essential characteristics, and sustainable means for conservation outcome of them. As a result of using the tool that considers domestic conditions, seven areas which included Development Restriction Zones, Urban Natural Park Areas, Fishery Resources Protection Zones, Riparian Zones, Natural Recreation Forest Zones, Water Source Protection Areas, and Buffer Zones for Korea National Arboretum were selected as OECMs. And the system of national protected areas was built by integrating them with national protected areas(NPA). Compared with the NPA, the system has been expanded by them and has reached to 17.88%, exceeding the target of 17% for terrestrial and inland water protections. It was proven that they were very effective in enlarging these protections. However, it failed to contribute to the target for marine protections. The expansion of marine protected areas requires different approaches, such as discovering new types of marine protected areas or linking them to biologically important marine areas all over the world.