• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.39-49
• /
• 2009

This research analyzes current pedestrian's safety zone choice standard problem and described about correct standard re-thesis at real. About problem of pedestrian traffic accidents to specific item statistical data to basis ramification of pedestrian traffic accidents, occurrence type of accident, action type etc. synthetically analyze and mark pedestrian's safety zone by countermeasure for decrease of pedestrian traffic accidents and utilize operating domestic outer garment reward and drew domestic Zone30 zone choice standard. Also, because analyzing effect that traffic discharge and speed through on-the-spot probe get in pedestrian thinking, presented quantitative standard, and analyze accident special quality of back pedestrian traffic accidents occurrence number of item and so on do accident type beside quantitative standard, road function, accident latitude and present standard. Specially, take advantage of statistical data of traffic accidents and put emphasis in pedestrian safety. Also, because establishment standard about safety facility establishment of Zone30 zone and systematic thesis of operation way do not consist, standard guide of consistency it is no and does equipment that is established in Zone30 zone because confusion happens by each local unit presented establishment and operation way, and present Zone30 zone.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.3
• /
• pp.719-723
• /
• 2006

Chlororinated bibenzyl compounds (1 and 2) inhibited the growth of the Gram positive bacterium Bacillus subtilis ATCC 19659, (2 mm inhibition zone and 2 mm inhibition zone at $30{\;}{\mu}g/disc$), Candida albicans ATCC 14053, (2 mm inhibition zone and 2 mm inhibition zone at $30{\;}{\mu}g/disc$), and the dermatophytic fungi Trichophyton mentagrophytes ATCC 28185, (3 mm inhibition zone and 7 mm inhibition zone at 30 Ug/disc) and Cladosporium resl'nae ATCC 52833 (1 mm inhibition zone at $30{\;}{\mu}g/disc$).

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.1
• /
• pp.231-234
• /
• 2007

Dichlororinated bibenzyl compound (4) has been isolated from the New Zealand liverwort. This compound was elucidated using 1D/2D-NMR and mass spectral method. The compound (3) inhibited the growth of the Gram positive bacterium Bacillus subtilis ATCC 19659, (2 mm inhibition zone and 2 mm inhibition zone at 30 ${\mu}$g/disc), Candida albicans ATCC 14053, (2 mm inhibition zone and 2 mm inhibition zone at 30 ${\mu}$g/disc), and the dermatophytic fungi Trichophyton mentagrophytes ATCC 28185, (12 mm inhibition zone at 30 ${\mu}$g/disc) and Cladosporium resinae ATCC 52833 (2 mm inhibition zone at 30 ${\mu}$g/disc). This bibenzyl compound (4) exhibited antimicrobial activity.

• Journal of KIISE
• /
• v.42 no.5
• /
• pp.551-557
• /
• 2015

The technology using ARM TrustZone draws attention as a new embedded virtualization approach. The ARM TrustZone defines two virtual execution environment, the secure world and the normal world. In such an environment, the inter-world communication is important to extend function of software. However, the current monitor software does not sufficiently support the inter-world communication. This paper presents a new inter guestOS communication scheme, for each world, for the ARM TrustZone virtualization. The proposed communication scheme supports bidirectional inter-world communication for single core and multicore environment. In this paper, It is implemented on a NVIDIA Tegra3 processor based on the ARM Cortex-A9 MPCore and it showed a bandwidth of 30MB/s.

• Journal of Welding and Joining
• /
• v.30 no.3
• /
• pp.51-56
• /
• 2012

Different microstructures in the weld zone of a metal structure including a fusion zone and heat affected zone are formed as compared to the base material. Thus, the mechanical properties in the weld zone are different from those in the base material. As the basic data for reliably understanding the structural characteristics of welded nuclear material, the mechanical properties in the weld zone and base material for a Zircaloy-4 strap and Hastelloy${(R)}$-X alloy strap are measured using an instrumented indentation technique (IIT) in this study.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.21 no.4
• /
• pp.183-193
• /
• 2008

Purpose: To research the changes of Skin Resistance Variability(SRV) over the period of ovarian cycle of healthy young women with normal and regular menstrual cycles using Oriental Medical Diagnose Autonomic system-3000 (OMD-3000). Methods: We measured SRV of 15 women who were working at O O Oriental Hospital from July to Oct. 2008. Each woman took the OMD-3000 test 8 times during 2 menstrual cycles. Each cycle consists of 4 phases-follicular phase, ovulation, luteal phase and menstruation. We analyse the data by SPSS 12.0 for windows. the one-way ANOVA by Repeated Measure(p<0.05). Results: 1. (1) The Factor AA means at zone 1 were 0.77$\pm$0.40, at zone 2 were 1.07$\pm$0.68, at zone 3 were 0.77$\pm$0.35, at zone 4 were 0.68$\pm$0.32, at zone 5 were 0.74$\pm$0.29, at zone 6 were 0.85$\pm$0.30, and at zone 7 were 0.74$\pm$0.29. The Factor AA means were lower than normal range at zone 1,3,4,5,6 and 7. The graph pattern of M shape was caused by the Factor AA means at zone 2 and zone 6 were higher than others. (2) The Factor AA means at zone 1 and zone 3 show abnormal regulation state. 2. During the menstruation. the Factor AA means were higher at zone 1,2 and 3 than other zones. During the ovulation, the Factor AA means were higher at zone 4,5,6 and 7 than other zones. Especially at the menstruation phase in zone 2 and at the ovulation phase in zone 6 tend to be highest means than other phases respectively. 3. However there were no significant difference of means during 4 ovarian phases in 7 zones except ovulation phase to luteal phase at zone 4(p = 0.013). Conclusion: The results suggest that changes of SRV during 4 menstrual cycles are not variables in reading 7-zone-diagnostic system. Further study will be needed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.39-50
• /
• 1991

Single crystals of yttrium iron garnet $(YIG:Y_3Fe_5O_{12})$have been grown by a modified floating zone crystal growth technique(Traveling Solvent Floating Zone, TSFZ method) using an infrared radiation convergence type heater. A series of evaluations for the resulting YIG single crystals were carried out. The grown crystals are 5~6mm in diameter and 15~35mm in length. The conditions of single crystal growth were as follows; growth rate 1mm/h, rotation rate 30rpm, gas flow rate 0.2 1/min., zone aspect ratio 1, convexity of interface 0.29, respectively.

• Journal of the Korean Society of Safety
• /
• v.30 no.2
• /
• pp.63-69
• /
• 2015

Recoilless weapons, which lead strong back blast and impulse noise more than 160 dB, have been used in compliance with the regulation of the safety zone for the safe operations. However, the safety zone regulations for the newly developed weapons should be prepared since the existing guidelines do not provide any information concerning the reason for the safety zone. In this study, the outdoor launch tests were performed to collect the data such as noise, pressure and temperature of the back blast. An assessment method using data obtained from launch tests has been proposed to determine the safety zone. The safety zone has been determined with consideration for the following criteria: Impulse noise, temperature and pressure of the back blast and blast angle. As a results, new safety zones for them have been established for the recoilless weapon developed by ADD (Agency for Defense Development). We expect that this research can be used as a guideline for establishing a new safety zone regulation of similar weapon to be developed.

• 한국도로학회:학술대회논문집
• /
• 2010.03a
• /
• pp.267-272
• /
• 2010

• The Journal of the Petrological Society of Korea
• /
• v.4 no.1
• /
• pp.61-87
• /
• 1995

On the basis of lithology, the Precambrian Hongjesa Granitic Gneiss can be locally zoned into granoblastic granitic gneiss, porphyroblastic granitic gneiss, migmatitic gneiss from its center to the marginal part. There are no distinct differences in mineral assemblages by lithologic zoning, but it partly shows the change of mineral assemblage in the adjacent with migmatitic gneiss, thus mineral assemblage can be subdivided into Zone I and Zone II. In terms of mineral compositions, the characteristics of Zone I are coexisting K-feldspar+muscovite+sillimanite. The characteristics of Zone II are (1) breakdown of muscovite, (2) coexisting garnetScordierite, (3) coexisting garnet+cordierite + orthoamphibole. The Buncheon Granitic Gneiss is mainly composed of augen gneiss. In the adjacent area with Honjesa Granitic Gneisses, Buncheon Granitic Gneiss has the mineral assemblage of sillimanite+biotite+K-feldspar+(kyanite). Kyanite occurs as relict grains in the Buncheon and Hongjesa Granitic Gneissess. Kyanite shows anhedral to subhedral form and coexists with sillimanite in only one of these samples. Garnet from a migmatitic gneiss (Zone 11) has relatively high $X_{Fe}$ value in core and rim. Garnet from a porphyroblastic granitic gneiss(Zone I) has relatively homogemeous core but compositionally-zoned rim. Biotites show various colour from greenish-brown, brown to reddish brown at maximum adsorption. Also, the Ti, and Mg content in biotites increases from Zone I to Zone II. The plagioclases shows the chemical composition of $Ab_{84}An_{16}$ -$Ab_{70}An_{30}$ (oligoclase) in Zone I and $Ab_{70}An_{30}$ -$Ab_{50}An_{50}$(andesine) in Zone 11. These variations indicate that the gneisses in the study area experienced a upperamphibolite facies. The presence of kyanite as relict grains indicates that the metamorphic rocks in this area exprienced a high-temperature/medium-pressure type metamorphism, followed by high-temperaturellow-pressure metamorphism. Metamorphic P-T conditions for each gneiss estimated from various geothermobarometers and phase equilibria are 698-$729^{\circ}C$/6.3-11.3 kbar in augen gneiss, 621-$667^{\circ}C$/1.0-5.4 kbar in migmatitic gneiss, and 602-$624^{\circ}C$/1.9-3.4 kbar in porphyroblastic granitic gneiss. These data suggest that the study area was subjected to a clockwise P-T path with isothermal decompression (dP/dT=about 60 bar/$^{\circ}C$).