• 한국잠사곤충학회지
• /
• 제44권2호
• /
• pp.87-92
• /
• 2002

염화아연에 의한 작잠 견사의 용해 조건을 살펴본 후 투석법에 의하여 얻은 작잠 견피브로인 분말의 형태와 적외선 분광 특성 및 X-선 회절 특성을 살펴본 결과 다음과 같은 결론을 얻었다. 1. 작잠 견사는 고농도의 염화아연 수용액에 용해되었으나 용해 조건을 조절하여 완전하게 작잠 견사를 용해할 수 있었다. 2. 재생 작잠 분말의 구조 특성을 살펴보기 위하여 적외선 분광분석과 X-선 회절분석을 행한 결과 작잠분말은 $\beta$-sheet 구조와 $\alpha$-helix 구조로 이루어져 있었다. 3. 염화아연을 사용하여 제조한 작잠 견피브로인 용액으로부터 순수한 작잠 견피브로인을 얻기 위한 새로운 방법이 개발되어야 함을 알 수 있었다.

• 동의생리병리학회지
• /
• 제18권5호
• /
• pp.1374-1381
• /
• 2004

The water extract of Dohongsamul-tang(DHSMT)has been traditionally used for treatment of ischemic heart in oriental medicine. However, little is known about the mechanism by which the water extract of DHSMT rescues cells from these damages. Therefore, this study was designed to evaluate the protective effects of DHSMT on zinc-mediated cytotoxicity in H9c2 cardiomyoblast cells. This study demonstrates that treatment of H9c2 cells with zinc caused a decrease in cell viability in a dose dependent manner and a chromatin condensation. Zinc induced the cleavage of poly(ADP-ribose) polymerase (PARP). In addition, zinc induced the decrease of Bcl-2, as well as increase of Bak expression and mitochondrial dysfunction. Zinc-induced H9c2 cell death was remarkably prevented by the pretreatment of DHSMT with consistent suppression of the cleavage of poly(ADP-ribose) polymerase (PARP), mitochondrial dysfunction and the expression of Bak and Bcl-2. Taken together, the results suggest that zinc induced severe cell death in H9c2 cardiomyoblast cells via intracellular GSH(reduced glutathione) depletion and the protective effects of DHSMT against oxidative injuries may be achieved through modulation of mitochondrial dysfunction and scavenging of ROS(reactive oxygen species).

• 생명과학회지
• /
• 제8권3호
• /
• pp.235-240
• /
• 1998

Matrix metalloproteinases(MMP)는 배발생 및 재조직화 등의 정상적인 생체형성과 관절염, 암전이, 치근막염, 골조송증 등의 질병과정에서 collagen이나 proteoglycan과 같은 세포외기질의 구성성분을 분해하는 아연(zinc)효소군이다. 지금까지 다양한 종에서 mmp의 유전자가 클로닝되고 그 기능이 연구되어 왔지만 아직 어류에서는 연구결과가 보고된 바가 없다. 본 연구에서는 한국의 부산연안에 많은 연골어유 투툽상어(Scylliorhinus toraxzame)로부터 RT-PCR(reverse transcriptase dependent polymerase chain reaction)의방법으로 mmp cDNA의 일부를 클로닝하였다. 이것은 염기서열에서 인간, 쥐 및 닭의 membrane type matrix matalloproteinase-3(mt3-mmps)의 염기서열과 74% 동일성을 보이며, 아미노산서열에서는 90%이상의 동일성을 갖고 있다. 또한 MMP에 나타나는 cysteine switch domain, zinc binding domain(HExGH motif), propeptide cleavage site, and RRKR motif등을 가지고 있다. 이러한 결과로부터 본 연구에서 클로닝된 RT-PCR단편은 두툽상어의 mt3-mmp 또는 이와 유사한 유전자의 cDNA이라 믿어진다.

• 한국세라믹학회지
• /
• 제47권4호
• /
• pp.353-356
• /
• 2010

Zinc oxide (ZnO) thin films were deposited using atomic layer deposition. The electrical and optical properties were characterized using Hall measurements, spectroscopic ellipsometry and UV-visible spectrophotometry. The electronic concentration and the mobility were found to be critically dependent on the deposition temperature, exhibiting increased resistivity and reduced electronic mobility at low temperature. The corresponding optical properties were measured as a function of photon energy ranging from 1.5 to 5.0 eV. The simulated extinction coefficients allowed the determination of optical band gaps, i.e., ranging from 3.36 to 3.41 eV. The electronic carrier concentration appears to be related to the reduction in the corresponding band gap in ZnO thin films.

• 한국표면공학회지
• /
• 제21권4호
• /
• pp.168-175
• /
• 1988

The nickel0zinc allot depositions have been studjen in ammonium chloridw added chloride baths to fine out the effects of ultrasonic irradiation for the electrodeposition processes. The compositions of deposited alloys, the current efficiencies, corrosion resistance and brightness in various conditions of electrodeposition were investigated, in the range of ultrasonic irradiation of 50,500 and 1,000kc/s respectively. The results obtained are as follows; 1. the ratio of nikel to zinc in the deposit increased according 시 the ammonium chloride concentration in irradiated baths. 2. The current efficiencies became also higer in the irradiated bath. 3. Ammonium ions in solution seem to retard formation of zinc hydroxide. 4. The corrsion resistance and brightness of the deposits are dependent upon nickel content of deposits which ranges 10-18%(wt)nickel in the irradiated baths and 11-15%(wt)in ninirradisted baths. 5. The corrosion resistance and brightnes of the deposited are appreciably better in the irradiated baths than in non-irradiated bath with the mole ratio of 3.4(NH+4/Ni+++Zn++).

• 한국세라믹학회지
• /
• 제52권3호
• /
• pp.197-203
• /
• 2015

The colorization of $Zn_2SiO_4$ crystal glazes was investigated by adding nucleating seeds with various coloring agents. The addition of color fixing agents such as $Fe_2O_3$, $MnO_2$, and NiO with seeds caused changes in the colors of glazes. The crystallinity and crystal size were dependent on glaze composition and firing schedules. By controlling coloring agents and firing schedules, it was possible to create various colors and sizes of crystals in a zinc-based crystalline glaze.

• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.703-709
• /
• 2006

We report on the synthesis of highly uniform, single phase zinc and cobalt thin films prepared by the Liquid Phase Deposition (LPD) method. X-Ray diffraction, TGA and EDX measurements support the assumption that the as deposited films are constituted by a mixture of crystallized FeOOH and amorphous M(OH)$_2$ (M=Co, Zn) which is converted upon heat treatment in air at 600?C into the corresponding zinc ferrites. The films with adjustable chemical compositions are identified with a crystal structure as spinel-type and present a spherical or rod-like microstructure, depending on the both the nature and concentration of the divalent transition metal ions. Zinc ferrite thin films present a superparamagnetic behavior above blocking temperatures which decrease with increasing the Zn content and are ferromagnetic at 5 K with coercivities ranging between 797.8 and 948.5 Oe, whereas the cobalt ferrite films are ferromagnetic at room temperature with magnetic characteristics strongly dependent on the chemical composition.

• 한국환경보건학회지
• /
• 제23권2호
• /
• pp.98-105
• /
• 1997

The study on the cytotoxicity of heavy metals was carried out to evaluate the cytotoxic effect of those on mouse L929 fibroblast cell in 96-well microtiter plates. The cytotoxicity was assayed by the neutral red, tetrazolium MTT, total protein, micronuclei test. The cytotoxicity of the heavy metals by neutral red and tetrazolium MTT was showed in order, cadmium > zinc > nickel for the cationic metals tested. The effect of metal-metal interaction on the cytotoxicity showed a marked reduction of cadmium toxicity by zinc, to a lesser degree, by nickel. The amount of total protein in treated group added heavy metals was less than that of the control and treated cadmium alone was less than those of combination with nickel or zinc. At midpoint cytotoxicity values of heavy metals, the frequency of micronuclei on the cell treated heavy metals was more than that of control and treated cadmium alone was more than those of combination with nickel or zinc. From those results, it could be suggested that the heavy metals decreased the viability of mouse fibroblast L929 cells in a concentration-dependent manner and have cytogenic toxic effects, but mixed group decreased the cytotoxic and cytogenic toxicity on L929 cells.

• International Journal of Korean Welding Society
• /
• 제2권1호
• /
• pp.1-10
• /
• 2002

The thermal contact conductance at different temperatures and with different electrode forces and zinc coating morphology was measured by monitoring the infrared emissions from the one dimensionally simulated contact heat transfer experiments. The contact heat transfer coefficients were presented as a function of the harmonic mean temperature of the two contacting surfaces. Using these contact heat transfer coefficients and experimentally measured temperature profiles, the electrical contact resistivities both for the faying interface and electrode-workpiece interface were deduced from the numerical analyses of the one dimension simulation welding. It was found that the average value of the contact heat transfer coefficients for the material with zinc coating (coating weight from 0 g/$mm^2$to 100 g/$mm^2$) ranges from 0.05 W/$mm^2$$^{\circ}C$ to 2.0 W/$mm^2$$^{\circ}C$ in the temperature range above 5$0^{\circ}C$ harmonic mean temperature of the two contacting surfaces. The electrical contact resistivity deduced from the one dimension simulation welding and numerical analyses showed that the ratio of electrical contact resistivity at the laying interface to the electrical contact resistivity at the electrode interface is smaller than one far both bare steel and zinc coated steel.

• Transactions on Electrical and Electronic Materials
• /
• 제14권2호
• /
• pp.59-62
• /
• 2013

At an infra-red (IR) wavelength of 1,064 nm, a diode-pumped Q-switched $Nd:YVO_4$ laser was used for the direct patterning of various transparent conductive oxide (TCO) thin films on glass substrate. With various laser beam conditions, the laser ablation results showed that the indium tin oxide (ITO) film was removed completely. In contrast, zinc oxide (ZnO) film was not etched for any laser beam conditions and indium gallium zinc oxide (IGZO) was only ablated with a low scanning speed. The difference in laser ablation is thought to be due to the crystal structures and the coefficient of thermal expansion (CTE) of ITO, IGZO, and ZnO. The width of the laser-patterned grooves was dependent on the film materials, the repetition rate, and the scanning speed of the laser beam.