• Journal of environmental and Sanitary engineering
• /
• v.24 no.3
• /
• pp.28-36
• /
• 2009

We have closely examined the concentration change characteristics, emission amounts, and the material balance of hazardous air pollutants at both early and later stages of the prevention facilities. These results will be uses as the basic data when preparing for the regulatory and management plans for hazardous air pollutants. The results of the study on heavy metals illustrated that the content of heavy metals in sludge across five facilities were as follows: copper> zinc> chrome> nickel> cadmium> mercury. In terms of heavy metal content in swage sludge, the sludge in incinerating facilities other than the sludge in the D incinerating facility containing industrial water waste, was examined in order to satisfy the ocean contamination standard and fertilizer specifications. Most of the items were shown to have satisfied the emission tolerance standards in the latter part of the prevention facilities(The average elimination rate was over 90%). Therefore, it is concluded that swage sludge containing high-concentrate heavy metals needs to be incinerated rather than recycled as fertilizer.

• Microbiology and Biotechnology Letters
• /
• v.7 no.4
• /
• pp.183-190
• /
• 1979

Cadmium ion-tolerant microorganisms were isolated from the sludge and soil of a cadmium ion-polluted area, a zinc mineralized area, in Kyung Sang Pook Do, Korea. A strain, C-7, which showed tile highest tolerance to cadmium ion was selected by screening from 18 cadmium tolerant microorganisms. By the taxonomical characteristics of this strain, it was identified as a variant of Erwinia sp.. The strain grew in a medium cadmium ion up to a concentration of 2, 800 $\mu\textrm{g}$/ml and the maximum intercellular accumulation of Cd$^{2+}$ was measured to be 28.60 mg/g dried cells (57.2％) during incubation in medium containing 50 $\mu\textrm{g}$/ml under aerobic condition at 28$^{\circ}C$ for 24 hour.r.

• Speech Sciences
• /
• v.10 no.4
• /
• pp.181-187
• /
• 2003

This paper introduces a new zinc coated copper wire electrode with coiled cone shape which has low surface resistance and tolerance to the motion artifact for promontory stimulation electrically auditory brainstem responses (PSEABR). Auditory brainstem responses (ABR) can be used to predict hearing threshold level with a great deal of accuracy particularly for a young child who cannot cooperate mechanically and some hearing impaired who are exaggerating a hearing loss for economic compensation. While severe profound sensorineural hearing losses may not be implemented by auditory potentials, PSEABR is proven as a useful tool even for some sensorineural related hearing impaired. It was shown that PSEABR gives the electrical stimuli to promontory of the cochlear instead of giving acoustic stimuli. For this reason, PSEABR can be used as an alternative for cochlear implantation, and can also be used as an optimal device selection and neural information for MAP. It was found that the role of electrode is very important in PSEABR. Even though this cone-shaped electrode was applied in animal experiments, waveforms are well produced by PSEABR. Thus, it was concluded that cone-shaped electrode turned out to be a useful preoperative audiological evaluation tool in deciding time for cochlear implantation surgery.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.142-148
• /
• 1997

This study was performed to develop the biological treatment technology of wastewater polluted with heavy metals. Heavy metal-tolerant microorganisms, such as Pseudomonas putida, P. aeruginosa, P. chlororaphis and P. stutzeri possessing the ability to accumulate cadmium, lead, zinc and copper, respectively, were isolated from industrial wastewaters and mine wastewaters polluted with various heavy metals. The effect of competing ions and metabolic inhibitors on heavy metal accumulation in the cells was investigated. Heavy metal accumulation into cells was drastically decreased in the presence of competing cation, $Al^{3+}$, and also decreased, at a lesser extent, in the presence of competing anions, $CO_3\;^{2-}$ and $PO_4\;^{2-}$. But heavy metal accumulation was not influenced generally in the presence of the other rations and anions. The accumulation of Cd, Zn or Cu by Cd-, Zn- or Cu-tolerant microorganism was remarkably decreased in the presence of metabolic inhibitors, but the accumulation of Pb by Pb-tolerant microorganism was little affected in the presence of metabolic inhibitors. These results suggested that the accumulation of Cd, Zn or Cu by Cd-, Zn- or Cu-tolerant microorganism was concerned with the biological activity depending on energy, and the accumulation of Pb by Pb-tolerant microorganism depended on not the biological activity but the physical adsorption on the cell surface. Each heavy metal-tolerant microorganism also exhibited some ability to accumulate the other heavy metals in solution containing equal concentrations of cadmium, lead, zinc and copper, when measured at 48 hours after inoculation of the microorganisms, but the accumulation rates were somewhat low as compared to the accumulation rates of heavy metal fitting to each tolerance. These results suggested that the accumulation of each heavy metal by each heavy metal-tolerant microorganism was a selective accumulation process.

• Journal of Food Hygiene and Safety
• /
• v.20 no.4
• /
• pp.205-210
• /
• 2005

The content of the trace metals in the cultured and wild fishes were determined. The tested fishes were genuin porgy (Pagrus major) and black porgy (Acanthopogrus schlegeli). The samples of the cultured and wild fishes were collected from slices of raw fish in shops, during 2003 to 2004. The samples were digested with acids, then analyzed by ICP (inductively Coupled plasma Spectrometer) and AAS (Automic Absorption Spectrometer) for the content of lead (Pb), cadmium (Cd), arsenic (As), copper (Cu), manganese (Mn) and zinc (Zn). The content of mercury (Hg) was determined using mercury analyzer. The mean contents of trace metals in cultured and wild fish was 0.031,0.047mg/kg far total-mercury,0.321,0.407 for Pb, 0.048,0.063 for Cd, 1.006, 1.132 for As, 0.467,0.806 for Cu, 0.233, 0.293 for Cr, 9.69, 12.20 for Zn,0.798, 0.624 mg/kg far Mn, respectively. The content of all the trace metals except manganese in wild fish was more than that in cultured fish. The highest level of total-mercury, lead, cadmium, zinc, chromium and arsenic in the samples analyzed were all below the quarantine limit of Korean regulation and guideline established by the U.S. Food and Drug Administration f3r human consumption. The level of the trace metals in the samples was negligible, which could be endogenous. Our data obtained in this study showed that the average weekly intakes of lead, cadmium and mercury from cultured and wild fishes takes about $6\∼13\%$ of Un(Provisional Tolerance Weekley Intakes) that FAO/WHO Joint Food Additive and Contaminants Committee has set to evaluate their safeties.

• Journal of Plant Biotechnology
• /
• v.43 no.2
• /
• pp.231-239
• /
• 2016

To study the transcript levels of epigenetically regulated genes in tobacco, we have developed a transgenic line OX1 overexpressing NtROS2a gene encoding cytosine DNA demethylation and a RNAi plant line RNAi13. It has been reported that salt- and $H_2O_2$-stress tolerance of these transgenic lines are enhanced with various phenotypic characters (Lee et al. 2015). In this paper, we conducted microarray analysis with Agilent Tobacco 4 x 44K oligo chip by using overexpression line OX1, RNAi plant line RNAi 13, and wild type plant WT. Differentially expressed genes (DEGs) related to metabolism, nutrient supply, and various stressed were up-regulated by approximately 1.5- to 80- fold. DEGs related to co-enzymes, metabolism, and methylation functional genes were down-regulated by approximately 0.03- to 0.7- fold. qRT-PCR analysis showed that the transcript levels of several candidate genes in OX1 and RNAi lines were significantly (p < 0.05) higher than those in WT, such as genes encoding KH domain-containing protein, MADS-box protein, and Zinc phosphodiesterase ELAC protein. On the other hand, several genes such as those encoding pentatricopeptide (PPR) repeat-containing protein, histone deacetylase HDAC3 protein, and protein kinase were decreased by approximately 0.4- to 1.0- fold. This study showed that NtROS2a gene encoding DNA glycosylase related to demethylation could regulate adaptive response of tobacco at transcriptional level.

• Journal of Ecology and Environment
• /
• v.33 no.3
• /
• pp.245-251
• /
• 2010

We evaluated the interaction between Cd and Zn in the bioaccumulation of seven clones of Salix caprea, which were exposed both to Cd and Zn alone and to a combination of Cd and Zn. Cadmium (Cd) and Zn concentration in the four treatments were administered in the following order: root > leaf > stem, and obvious differences were noted among the treatments and clones. The leaf Cd concentration of clone BH2 and stem Cd concentration of clone BH5 in the combined Cd and Zn treatment group was increased by 62% and 110%, respectively, relative of that of the Cd alone treatment group. On the other hand, the leaf and stem Zn concentration of clone BH8 in the combined Cd and Zn treatment group was reduced by 66% and 61%, respectively, relative to that of the Zn alone treatment group. Translocation of Cd and Zn from the root was higher in the leaf than in the stem, and the combined Cd and Zn treatment stimulated the translocation of Cd from the root to the leaf and stem, whereas it suppressed the translocation of Zn from the root to the leaf and stem. Therefore, the interaction effects were considered strongly synergistic with Cd in the presence of Zn, but proved antagonistic to Zn in the presence of Cd in the combined Cd and Zn treatment group. The phytoremediation potentials of the seven clones, which were estimated from standard indices of Cd and Zn concentration in Cd and Zn alone and the combined Cd and Zn treatment groups, were highest in clone BH3, and lowest in clone BH5. Therefore, we recognize S. caprea as an appropriate material for phytoremediation, and this is particularly the case with clone BH3. However, further research will be required to evaluate the effects of Cd and Zn on the physiological changes as well as tolerance mechanisms against metal toxicity in S. caprea clones.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.144-144
• /
• 2017

Micronutrients such as zinc (Zn), iron (Fe), manganese (Mn) have important roles for development and growth in plants but it also have roles in animals and humans. In previous studies, a Korean weedy rice, KH2J was selected to have tolerance to heavy metal, lead (Pb) compared with a cultivar, Milyang23. To identify QTLs for micronutrients concentration in grain, an F2 population (120 plants) were developed from a cross between KH2J and an indica rice cultivar, Milyang23. To measure the concentration of eight ions, Zn, Fe, Mn, Pb, calcium (Ca), copper (Cu), cadmium (Cd) and arsenic (As), grains were collected and digested with 65% nitric acid, and the ion contents were measured using inductively coupled plasma mass spectrometry. A total 27 putative quantitative trait loci (QTLs) were detected on 12 chromosomes by single point analysis and 22 putative QTLs were detected by composite interval mapping. The co-locations of QTL for Zn, Fe and Mn were observed on chromosome 5. The QTLs for Cd, Cu and Zn were co-localized on chromosome 10, and QTLs for Zn, As and Mn was on chromosome 12. The Zn concentration in F2 generation showed significant correlation with concentrations of As (r = -0.4), Cu (r = 0.5) and Fe (r = 0.2) (P < 0.01). Also, the Ca concentration was significantly related with Mn and Fe concentrations (P < 0.01). Fine mapping of these QTLs is underway to analyze their functional relationship.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.6
• /
• pp.401-411
• /
• 2023

This study investigates the synthesis, characterization, and application of zinc oxide (ZnO) nanoparticles for corrosion resistance and stress corrosion cracking (SCC) mitigation in high-temperature and high-pressure environments. The ZnO nanoparticles are synthesized using plasma discharge in water, resulting in rod-shaped particles with a hexagonal crystal structure. The ZnO nanoparticles are applied to Alloy 600 tubes in simulated nuclear power plant atmospheres to evaluate their effectiveness. X-ray diffraction and X-ray photoelectron spectroscopy analysis reveals the formation of thermodynamically stable ZnCr₂O₄and ZnFe₂O₄ spinel phases with a depth of approximately 35 nm on the surface after 240 hours of treatment. Stress corrosion cracking (SCC) mitigation experiments reveal that ZnO treatment enhances thermal and mechanical stability. The ZnO-treated specimens exhibit increased maximum temperature tolerance up to 310 ℃ and higher-pressure resistance up to 60 bar compared to non-treated ZnO samples. Measurements of crack length indicate reduced crack propagation in ZnO-treated specimens. The formation of thermodynamically stable Zn spinel structures on the surface of Alloy 600 and the subsequent improvements in surface properties contribute to the enhanced durability and performance of the material in challenging high-temperature and high-pressure environments. These findings have significant implications for the development of corrosion-resistant materials and the mitigation of stress corrosion cracking in various industries.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.2
• /
• pp.140-146
• /
• 2008

Marine ecotoxicological standard method using fish larvae was established with the standard test species of Oryzias latipes(Japanese Medaka) and Paralichthys olivaceus(flounder) and with the 7 day $LC_{50}$ as endpoint. Test method referred to the USEPA(1994) with the replacement of test species found in the Korean water. Standard test species were selected in terms of the species supply and ecological importance in Korean waters. Japanese medaka can be reared with small tanks in the lab and has wide tolerance on salinity, and flounder eggs can be easily obtained from commercial fish hatcheries. General conditions for larval fish toxicity test are as follows. The possible salinity ranges for toxicity test were $0{\sim}35\;psu$ for medaka and >20 psu for flounder. Test type was designated as static non-renewal test if the dissolved oxygen in the test chamber does not fall below 4.0 mg/L. Ages of test species were selected as 7 days after hatched for medaka(about 5 mm TL) and 25 days for flounder(about 10 mm TL) because of the low natural mortality after these periods. Test can be accepted when the survival rates are over 80% in control. Also, species sensitivity on standard reference materials(copper, cadmium or zinc) must be provided with the toxicity test results.