• Preventive Nutrition and Food Science
• /
• 제18권2호
• /
• pp.92-97
• /
• 2013

The calcification of vascular smooth muscle cells (VSMCs) is considered one of the major contributors for vascular disease. Phosphate is known as the inducer for VSMC calcification. In this study, we assessed whether phosphate affected cell viability and fetuin-A, a calcification inhibitor protein, both which are related to VSMC calcification. Also, VSMC viability by zinc level was assessed. The results showed that phosphate increased Ca and P deposition in VSMCs (A7r5 cell line, rat aorta origin). This phosphate-induced Ca and P deposition was consistent with the decreased A7r5 cell viability (P<0.05), which implies phosphate-induced calcification in A7r5 cells might be due to the decreased VSMC cell viability. As phosphate increased, the protein expression of fetuin-A protein was up-regulated. A7r5 cell viability decreased as the addition of cellular zinc level was decreased (P<0.05). The results suggested that zinc deficiency causes the decreased cell viability and it would be the future study to clarify how zinc does act for VSMC cell viability. The results suggest that the decreased VSMC viability by high P or low Zn in VSMCs may be the risk factor for vascular disease.

• The Korean Journal of Ceramics
• /
• 제3권4호
• /
• pp.269-273
• /
• 1997

Chemical composition of cement powder influences the setting time and early compressive strength development. The setting time increases as the amounts of zinc oxide and magnesium oxide are increased. For one day compressive strength development, a cement powder with a composition 90% ZnO, 8% MgO and 2% silica resulted in the highest strength (greater than 1, 090 kg/$\textrm{cm}^2$). Cement-forming liquids also need to be buffered, with both aluminum and zinc ions, for a good consistency and a higher strength of the zinc phosphate cement. These liquids control the setting reactions.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2280-2282
• /
• 2009

Amorphous zinc phosphate nanospheres were prepared via a sonochemical route. Zinc phosphate nanospheres were uniform in shape with an average diameter of 210 nm. The average diameter of nanospheres could be controlled by changing the pH of a precursor solution. This sonochemical method is simple, facile, economical, and environmentally benign. Non-crystalline characteristics of as-prepared zinc phosphate nanospheres were confirmed by X-ray diffraction, transmission electron microscopy, and FT-IR spectroscopy analyses. We believe this technique will be readily adopted in realizing other forms of zinc phosphate nanostructures.

• 구강회복응용과학지
• /
• 제18권3호
• /
• pp.225-233
• /
• 2002

This study was aimed to evaluate the effects of ultrasonic vibration on margin types and cements by comparing bond strength of cemented crown. In this study, margins of each metal die, which were chamfer, shoulder and shoulder with bevel, were prepared using computer milling machine. Specimens were cemented with zinc phosphate cement or resin cement. The specimens were divided by the finish line and cement used, ultrasonic vibration. I made total 84 specimens. All specimens were divided into two groups. One group was not vibrated, the other group was subjected to ultrasonic vibration for 12 minutes. Tensile bond strength was measured using Universial testing machine. The changes of bond strength in groups were statistically analyzed by t-test or One-way ANOVA. The results were as follows : 1. Ultrasonic instrumentation diminished the bond strength of crown cemented with zinc phosphate cement and resin cement after 12 minutes application. 2. In case of zinc phosphate cement, the bond strength of a vibrated group was showed significantly decreased(p<0.05). In vibrated groups with zinc phosphate cement, shoulder with bevel exhibit a significant difference to chamfer and shoulder(p<0.05) 3. Resin cement was more resistant to ultrasonic vibration than zinc phosphate cement and showed no significant differences according to ultrasonic vibration and margin type. In conclusion, These results revealed that zinc phosphate cement was most affected and resin cement was the least affected by ultrasonic vibration. Especially shoulder with bevel design was most affected in zinc phosphate cement groups. we should consider these results and be taken in the application of ultrasonic vibration to any teeth restored with crowns.

• 대한치과의사협회지
• /
• 제11권1호
• /
• pp.41-44
• /
• 1973

The experiment consisted of cementing full veneer crown of extracted teeth and a standardized cylindrical metal dies (6mm diameter, 6mm height, 1mm shoulder) and then measuring the tensile strength required to remove the cemented restoratoins by the Instron testing machine in the Korea Institude of Science and Technology. The Instron machine was operated at a rate of loading of 0.2cm per minute. From the experiments, the following results obtained. 1. The tension of zinc phosphate and alumina EBA cements were highest all of the cements. 2. The tension of Fynal and the addition of eugenol to zinc Phosphate cements were similar. The addition of eugenol to zinc phosphate cement was half stength and Fynal cement was on third strength than zinc phosphate cement. 3. The tension of zinc oxide-eugenol cement was lowest all of the cements.

• Restorative Dentistry and Endodontics
• /
• 제13권2호
• /
• pp.307-322
• /
• 1988

The purpose of this study is to evaluate the pulpal responses to the base materials such as zinc oxide eugenol cement, calcium hydroxide, zinc phosphate cement, polycarboxylate cement and glass ionomer cement. The 100 caries free dog teeth were devided into 2 groups by remaining dentin thickness (Group A: 0.4-0.6 mm, Group B: 0.8-1.0 mm) and each group were devided into 5 subgroups. The intervals of observation period are 3days, 1 week, 2 weeks, 4 weeks and 8 weeks respectively after experiment. The specimens were fixed with 10% formalin and decalcifed in 5% nitric acid. All specimens were stained with Hematoxylin-Eosin and examined histopathologically. The results were as follows. 1. In group A, atropy or hyperplasia in odontoblasts were seen in zinc oxide eugenol cement, calcium hydroxide and zinc phosphate cement. No changes in odontoblasts were seen in polycarboxylate cement and glass ionomer cement. 2. In group A, increase of predentin were seen in all experimental materials. 3. In group A, vascular congestion were seen in all experimental materials and inflammation were seen on 3 days in zinc oxide eugenol cement, 8 weeks in zinc phosphate cement and hemorrage were seen on 3 days in zinc phosphate cement. 4. In group B, changes of odontoblasts were not seen all experimental materials. 5. In group B, increase of predentin and vascular congestion were seen in all experimental materials but inflammation were not seen.

• 한국결정학회지
• /
• 제12권3호
• /
• pp.145-149
• /
• 2001

Pyrazine 존재 하에서, Zn(NO₃)₂·존재 하에서 . Zn(NO,)7·6H₂O와 K₂HPO₄가 수열반응하여 Zn₃(PO₄)₂(H₂O) (1)실험식을 갖는 3차원 zinc-phosphate 배위 고분자가 합성되었다. 화합물 1의 구조가 IR 분광법 및 X-ray 회절법으로 규명되었다. 화합물 1의 결정학적 자자료: 단사정계 공간군 P2₁/c, a=8.750(1)Å, b=4.901(1)Å, c=16.759(3)Å, β=94.98(2)°, Z=4, R(wR₂)=0.0332(0.0927).

• 한국세라믹학회지
• /
• 제38권6호
• /
• pp.593-595
• /
• 2001

Zinc-phosphate glasses에 B$_2$O$_3$를 도입하여 borate, phosphate, boro-phosphate networks가 혼재되어 있는 highly cross-linked structures를 형성시켜 Phosphate glasses의 화학적 안정화를 검토하였다. Raman 측정 결과 B$_2$O$_3$와 P$_2$O$_{5}$는 잘 혼화된 polynary networks를 이루고 있으며, 이렇게 하여 증진된 구조적 cross-linking에 의하여 xB$_2$O$_3$.(1-x)Zn$_2$P$_2$O$_{7}$ glasses의 T$_{g}$, T$_{d}$는 증가하였고 동시에 CTE는 감소하는 결과를 가져왔다.

• 대한치과의사협회지
• /
• 제10권8호
• /
• pp.531-534
• /
• 1972

The author measured exothermic temperature of the 5 kinds of zinc phosphate cement and 3 kinds of copper phosphate cement during setting process. Cements were mixed on the glass slab with flexible steel spatula at room temperature (25.8℃) for one minute (spatulating speed was 100 strokes per minute) and placed in the incubator of which temperature was held at 37℃ and thermometer was inserted into the cement mass. The powder liquid ration was 3.0gm:1ml and 1.5gm:1ml. The results were as follows. 1) The heat generated after mixing these cements was under 47.22℃. 2) The range of thermal change of the zinc phosphate cements during setting process was wider than copper phosphate cements. 3) The exothermic temperature from the thin mix was higher than thick mix. 4) The exothermic temperature of the zinc phosphate cements was higher than copper phosphate cements.

• 한국세라믹학회지
• /
• 제37권9호
• /
• pp.900-908
• /
• 2000

일반적인 유리용융과 열처리법을 이용하여 많은 양의 금속구리 미립자가 분산된 Zinc Phosphate 유리를 제조하였다. 금속산화물로는 Cu$_2$O를, 환원제로는 SnO를 사용하였다. XRD와 전자회절로부터 열처리에 의해 금속구리의 결정상이 석출됨을 알 수 있었고, TEM에 의해 석출상의 크기는 수~20nm 정도임을 알 수 있었다. 또한 570nm에서의 광흡수 피크로부터도 금속구리의 석출을 확인할 수 있었다. 석출입자의 크기와 흡광은 석출을 위한 열처리 온도와 시간이 증가함에 따라 증가하였다. XPS 스펙트럼으로는 구리의 산화상태 중 Cu$^{2+}$ 이온의 상태만을 분명히 할 수 있었다. 매질유리의 BO/NBO의 비는 열처리 전후 크게 변화가 없었으며, 열처리 후 Cu$^{2+}$ 이온이 다소 감소되는 경향을 보였다.