• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.598-602
• /
• 2010

When metal oxides are added into crystalline glaze, colors of glaze and crystals are similar as colorants generally. But the case of NiO in zinc crystalline glaze is different from general color development. When NiO is added to zinc crystalline glaze it can develop two or three colors. The active use of color development mechanism by adding NiO to the zinc crystalline glaze to control color of the base glaze and crystal with stability is investigated. This report is expected to contribute to the ceramic industry in improving application of zinc crystalline glaze. For the experiment of NiO, the quantity of NiO additives is changed to the base glaze for the most adequate formation of willemite crystal from previous research and firing condition: temperature increasing speed $5^{\circ}C/min$, holding 1 h at $1270^{\circ}C$, annealing speed $3^{\circ}C/min$ till $1170^{\circ}C$, holding 2 h at $1170^{\circ}C$ then naturally annealed. The samples are characterized by X-ray diffraction (XRD), UV-vis, and Micro-Raman. The result of the procedure as follows; Ni substitutes for Zn ion then glaze develops blue willemite crystals, as if cobalt is used, on brown glaze base. When NiO quantity is increased to over 5 wt%, willemite size is decreased, and the density of the crystal is increased, at the same time $Ni_2SiO_4$ (olivine) phase, the second phase, has been developed. The excessive NiO is reacted with silicate in the glass then developed green $Ni_2SiO_4$ (olivine), and quantity of $Ni_2SiO_4$ (olivine) is increased as quantity of willemite is decreased. It is proved to create three colors, blue, brown and green by controlling the quantity of NiO to the zinc crystalline glaze and it will improve the multiple use of colors to the ceramic design.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.8
• /
• pp.1160-1167
• /
• 2017

Objective: To assess the effects of proteinate complex zinc (PC-Zn) on growth performance, antioxidative function, trace element concentrations and immune function in weaned piglets. Methods: Three hundred newly weaned barrows ($Duroc{\times}Landrace{\times}Yorkshire$), 28 days of age, were randomly allotted to 3 dietary groups of 5 replicate pens per group for 4 weeks of feeding. Experimental diets were: i) zinc deficient diet (ZnD, 24 mg/kg Zn supplementation from $ZnSO_4$), ii) inorganic Zn diet supplemented with 120 mg/kg of Zn from Zn sulfate ($ZnSO_4$), and iii) organic Zn diet supplemented with 120 mg/kg of Zn from PC-Zn. The body weight of pigs were recorded at the beginning, at the middle and at the end of the experiment, and the amount of feed supplied each day was recorded. Five barrows from each dietary treatment group were selected to be anesthetized and euthanized at the end of the trial to determine the Zn, Cu, Fe, and Mn concentrations, the hepatic metallothionein content, the levels of methane dicarboxylic aldehyde (MDA), Mn, and Cu/Zn superoxide dismutase (SOD), and glutathione peroxidase (GSH-Px) in the spleen, the levels of interleukin (IL)-2, IL-4, IL-10, interferon $(IFN)-{\gamma}$, $CD3^+$, $CD4^+$, and $CD8^+$ T lymphocyte. Results: The accumulation of Zn in the spleen, levels of SOD, GSH-Px, IL-4, IL-10, the proportions of $CD3^+$ and $CD4^+$ T lymphocyte, and the ratio of $CD4^+/CD8^+$ T lymphocyte were increased by organic Zn supplementation compared to ZnD, while the levels of MDA, $IFN-{\gamma}$, and proportion of $CD8^+$ T lymphocyte were lowered. Conclusion: These findings indicate that Zn can improve the antioxidant potential and immune functions of weaned piglets.

• Corrosion Science and Technology
• /
• v.7 no.1
• /
• pp.16-21
• /
• 2008

A non-phosphorous program employing an alkyl epoxy carboxylate (AEC) has been successfully applied to petrochemical and other large industrial open recirculating cooling water systems. AEC is a patented non-phosphorous calcium carbonate scale inhibitor that has demonstrated better scale inhibition abilities than traditional organic phosphonates. In addition to its antiscalant properties, AEC inhibits carbon steel corrosion when used at high dosages. AEC can be combined with zinc to form a non-phosphorous program with very low levels of phosphate to provide an environmentally acceptable program. In actual applications, the total phosphate developed in the cooling system from cycling the makeup is below 1 ppm as $PO_4$. This level has complied with the highest standards of wastewater discharge limitations. The performance of two AEC/Zinc applications is reviewed. In both cases excellent corrosion and scale control were achieved with AEC/Zinc programs. One case history details the performance with a low hardness water (100 ppm calcium, as $CaCO_3$) operating at 8-10 cycles of concentration. The corrosive nature of the water and the long retention time of the system stressed both the corrosion and scale control capabilities of the program. The second case history demonstrates the performance of the program with a moderate hardness water (400-600 ppm calcium, as $CaCO_3$), but under harsh conditions of high temperature and low flow. The AEC/zinc combination has been found to be highly effective in controlling the corrosion of ferrous metals. AEC can provide good corrosion inhibition at high concentrations, while zinc is known to be an excellent cathodic inhibitor. The combination of the two inhibitors not only provides a synergistic blend that is effective over a wide range of operating conditions, but also is environmentally friendly.

• Journal of Animal Science and Technology
• /
• v.64 no.6
• /
• pp.1092-1104
• /
• 2022

Using antibiotics as growth promoter has been banned in poultry feed industry, thus various researchers try to seek an alternative to replace the growth-promoting antibiotics. In this study, we aimed to evaluate the growth performance via intestinal nutrient utilization and cecal microbial composition of broiler after dietary supplementation with most commonly using antibiotics, zinc bacitracin, and sophorolipid. A total of 180 1-day-old chicks were randomly assigned, and dietary treatment was as follow: CON, basal diet; ZB, 100 ppm of zinc bacitracin supplemented diet; and SPL, 250 ppm of sophorolipid supplemented diet. Their growth performance was evaluated and the samples of blood, small intestine, and ileal and cecal digesta were collected for biochemical, histological, and genomic analyses. The body weight and average daily gain of 7-day-old chicks were higher in ZB and those in overall experimental period were improved by ZB and SPL supplementation (p < 0.05). Their intestinal characteristics were not affected by dietary treatments in duodenum and ileum. Nonetheless, villus height was increased by SPL supplementation in jejunum (p < 0.05). Moreover, dietary SPL supplementation could down-regulate the expression level of pro-inflammatory cytokine, IL-1β (p < 0.05). mRNA levels of lipid and protein transporters did not differ among the treatments, however, relative expression levels of carbohydrate transporters, GLUT2 and SGLT1 were increased in broiler chicken's jejumum fed zinc bacitracin and sophorolipid supplemented diets (p < 0.05). Dietary zinc bacitracin supplementation could increase the population of Firmicutes in phylum level, and the portion of Turiciacter in genus level. On the other hands, the portion of Faecalibacterium was increased by dietary SPL supplementation compared to the other treatments. Our findings suggest that SPL supplementation improves growth performance through enhanced carbohydrate utilization capacity via improvement of gut morphological status and modulation of the cecal microbial population of broilers.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.5
• /
• pp.597-608
• /
• 2021

The control head components used in small military vessels are designed to be domestically produced, prototypes, structural analysis, and casting methods are designed and cast. The control head assembly consists of a lever, an aluminum outside cover, Middle, front gear cover, back gear cover, and a zinc worm gear. In order to reverse the design of each component, 3D scanning device was used, 3D modeling was performed by CATIA, and prototype productions were carried out by 3D printer. In order to reduce the cost of components, gating system is used by gravity casting method. The SRG ratio of 1:0.9:0.6 was set by applying non-pressurized gating system to aluminum parts, 1:2.2:2.0 and pressurized gating system to zinc parts, and the shapes of sprue, runner and gate were designed. The results of porosity were also confirmed by casting analysis in order to determine whether the appropriate gating system can be designed. The results showed that all parts started solidification after filling completely. ANSYS was used for structural analysis, and the results confirmed that all five components had a safety factor of 15 more. All castings are free of defects in appearance, and CT results show only very small porosity. ZnDC1 zinc alloy worm gear has a tensile strength of 285 MPa and an elongation of 8%. The tensile strength of the four components of A356 aluminum alloy is about 137-162 MPa and the elongation is 4.8-6.5%.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.609-614
• /
• 2009

The low-temperature preparation of porous ceramics was carried out using mixtures of alumina-zinc borosilicate (ZBS) glass. The compositions of alumina-ZBS glass mixture with PMMA pore-former were unfortunately densified. Because PMMA was evaporated below the softening point of ZBS glass ($588{^{\circ}C}$), the densification through the pore-filling caused by the capillary force might occur. Howerver, those with carbon possessed pores where carbon was evaporated above the softening point. The porous ceramic having 35% porosity was successively fabricated by the low-temperature sintering process below $900{^{\circ}C}$ using 45 vol% of alumina, 45 vol% ZBS of glass, and 10 vol% of carbon as starting materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.926-929
• /
• 2007

A significant progress has been made in the characterization of zinc oxide (ZnO) semiconductor as a new semiconductor layer instead of amorphous Si semiconductor used in thin film transistor due to its high electron mobility at low deposition temperature which is quite suitable for flexible display and OLED devices. The wet pattering of ZnO is another important issue with regard to mass production of ZnO thin film transistor device. However, the wet behavior of ZnO thin film in aqueous wet etching solutions conventionally used un TFT industry has not been reported yet, in this work, wet corrosion behavior of RF magnetron sputtered ZnO thin film in various wet solutions such as phosphoric and nitric acid solutions was studied using by electrochemical analysis. The effects of deposition parameters such as RF power and oxygen partial pressure on corrosion rate are also examined.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.4
• /
• pp.1-9
• /
• 2007

A wastewater treatment plant, operating process is physico-chemical/biological activated sludge attached sand filtration, was selected to evaluate effluent quality and pollutants removal efficiencies consideration for deriving the technology-based effluent limitation for petroleum refining industry discharge. The results of influent and effluent analysis were as follows: Average effluent quality were 0.076mg/l of copper, 0.084mg/l of lead, 0.036mg/l of zinc, 0.005mg/l of nickel and 0.004mg/l of cadmium, and the range of coefficient of reliability from 0.007 of copper to 1.0 of lead. Also, 95% of reliability, 0.112, 0.15, 0.063, 0.015 and 0.009mg/l, respectively, were remarkably lower than their effluent limitations. And to reach 95% reliability of effluent limitation at cleanness area, designed effluent quality of copper, lead, zinc and cadmium should be 0.268, 0.099, 0.526 and 0.008mg/l, respectively.

• Environmental and Resource Economics Review
• /
• v.18 no.2
• /
• pp.345-375
• /
• 2009

In this paper we examined the impact of mineral resources industry on the national economy and necessity of a mineral resources cycle technology development. For this purpose, the case study on Gagok polymetallic (zinc-lead-copper) mine, which is being re-developed, was carried out to study an anticipated effects of application of the full cycle technology. As a consequences of the study, if we apply the technology to a polymetallic (zinc-lead-cooper) mine, we can expect 55 billion won worth of import-substitution effect. Moreover, if applied to 10 similar mines, we can expect the 10.4% of import-substitution effect of the total imports annually. Also, national competitiveness in value chain of mineral industry will be promoted through the technological advancement in upper stream and the full cycle technology will render a service to the mineral industry to be the country's new growth engine.

• Safety and Health at Work
• /
• v.2 no.2
• /
• pp.87-96
• /
• 2011

In 1967, the problem of occupational lead exposure came to public attention in Korea. Since then, regular progress has been made in lowering workplace lead exposures, instituting new workplace controls, and implementing health examinations of exposed workers. Past serious lead poisoning episodes made it possible to introduce biological monitoring programs on a voluntary basis in high-lead-exposure facilities in Korea. Industry-specific occupational health services for lead workers in Korea during the last 22 years can be categorized into three phases. During the first phase (1988-1993), efforts were directed at increasing awareness among workers about the hazards of lead exposure, biological monitoring of blood zinc protoporphyrin began, and a respiratory protection program was introduced. During the second phase (1994-1997), a computerized health management system for lead workers was developed, blood-lead measurement was added to biologic monitoring, and engineering controls were introduced in the workplace to lower air-lead levels to comply with air-lead regulations. Finally, during the third phase (1998-present), a new biomarker, bone-lead measurement by X-ray fluorescence, was introduced. Bone-lead measurement proved to be useful for assessing body burden and to demonstrate past lead exposure in retired workers. Occupational health service practice for lead workers, including the industry-specific group occupational health system, has brought considerable success in the prevention of lead poisoning and in reducing the lead burden in Korean lead workers during the last several decades. The successful achievement of prevention of lead poisoning in Korea was a result of the combined efforts of lead workers, employers, relevant government agencies, and academic institutes.