• Journal of Radiation Industry
• /
• v.6 no.2
• /
• pp.153-158
• /
• 2012

In this research, poly(acrylic acid) (PAAc) hydrogels containing zinc oxide particle were prepared by gamma-ray irradiation. PAAc powder was completely dissolved in distilled water at room temperature. Water-insoluble zinc oxide powder were added into the PAAc solution and stirred until totally dissolved. Finally, the mixture was irradiated by gamma-ray irradiation to make crosslinking. The effects of various parameters such as zinc ions' concentration, irradiation doses were varied and investigated in detail. PAAc hydrogels containing zinc oxide particle were characterized by gel content and swelling ratio. Moreover, the antibacterial properties of this material were evaluated by paper diffusion test against the Gram positive and Gram negative bacteria.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.1
• /
• pp.44-47
• /
• 2000

Cell growth and DNA synthesis were studied from a cultured early- and late- pas- sage mouse aorta smooth muscle cell (MASMC) because the proliferation of vascular smooth muscle cell (VSMC) is a key factor in development of atherosclerosis. In this study, the cells were cultured in fetal bovine serum (FBS) and stimulated by growth factors such as thrombin and platelet-derived growth factor-BB (PDGF-BB). Compared to the number of early-passage MASMC (passage 3 to 9) the number of late-passage MASMC (passage 30 to 40) in a normal serum state was increased 2 fold at Day 1, 3 and 6 in culture, respectively. Incorporation of $[^3H]$ thymidine into DNA induced by serum, PDGF and thrombin in late-passage MASMC was greater than those in early-passage MASMC. We also examined whether intracellular zinc levels would be an aging factor or not. The intracellular zinc level in early- and late-passage MASMC was monitored by using the zinc probe dye N-(6-methoxy-8-quinolyl)-p-toluenesulfonamide. It is interested that late-passage MASMC increased the intracellular fluorescence level of zinc, more than the early passage MASMC did. The alterations of intracellular zinc level occur concurrently with changes in MASMC proliferation rate during aging. This data suggest that the age-associated changes in zinc concentrations may provide a new in vitro model for the study of smooth muscle cell differentiation.

• Resources Recycling
• /
• v.8 no.5
• /
• pp.11-18
• /
• 1999

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.1
• /
• pp.40-43
• /
• 2000

Pyrrolidinedithiocarbamate (PDTC) and N-Acetylcysteine (NAC) are metal and nonmetal-chelating antioxidant which can induce rat and human smooth muscle cell death. When the smooth muscle cells from mouse aorta (MASMC) that we successfully cultured recently was exposed to PDTC and NAC in a normal serum state, the cells were induced to death by these compounds. However, PDTC did not induce the cell death in a serum depleted medium. This data suggests that certain factors in the serum may mediate the cytotoxic effect of PDTC. The metal chelator, Ca-EDTA blocked PDTC-induced cell death, but Cu-, Fe-, and Zn-EDTA did not block the PDTC-induced cell death. This data indicated that copper, iron, and zinc in the serum may lead to the cytotoxic effect of PDTC. Investigation of the intracellular zinc level in PDTC-induced smooth muscle cell death using the zinc probe dye N-(6-methoxy-8-quinolyl)-p-toluenesulfonamide shows that only the muscle-containing layers of the arteries have higher level of zinc. As expected, PDTC increased the intracellular fluorescence level of the zinc. In agreement with these results, the addition of an exogenous metal, zinc, induced the vascular aortic smooth muscle cell death which led to an increased intracellular zinc level. We concluded that PDTC induced mouse aortic smooth muscle cell death required not only zinc level but also intracellular copper and iron level. The mechanism of this antioxidant to induce vascular smooth muscle cell death may provide a new strategy to prevent their proliferation in arteriosclerotic lesions.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.1
• /
• pp.45-51
• /
• 2021

The purpose of this study is to suggest the optimal shape for a local air ventilation system for fume removal, which is operated in a zinc galvanizing factory, and to propose the improvement plan for a ventilation system used in a zinc galvanizing factory through flow analysis. A part of the air sprayed by an air curtain goes out. It will be necessary to research the position of an air curtain, its spray angles, and its nozzle shape. In addition, additional research needs to be conducted on the shape of the fan installed before a hood in order to make it easy to induce fume. In a local air ventilation system, air is inhaled from the outside. The higher an inlet negative pressure is, the easier fume is removed. It was found that it was necessary to install an appropriate hole in the wall on the back of a push nozzle in order to reduce an inlet negative pressure.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.4
• /
• pp.136-142
• /
• 2020

Crystallization of zinc crystalline glaze requires demanding conditions such as the formation of a nucleating agent and the amount of nucleating agent, and growth of crystalline. Zinc crystalline glaze is hard to utilize in the industry because of its narrow range of the firing temperature, and the crystallization's dependency on the quality of zinc. Stimulation of zinc crystallization and formation of frit enable zinc crystalline glaze to be reconstituted in a various range of firing schedules, leading to the development of a competitive industrial glaze.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.1
• /
• pp.42-47
• /
• 2003

Hot-dip galvanizing process is used widely in industry to achieve corrosion resistant coatings. Poor drainage during this process often leads to problems such as icicle formation and bridging In this work, mild steel specimens were hot-dip galvanized. Influence of the addition of bismuth, aluminum and both (bismuth and aluminum) to the zinc bath on the zinc drainage were determined. Bismuth additions improved the drainage significantly. Zinc bath containing 0.1 wt.% Bi and 0.025∼0.05 wt.% Al showed uniformity of coatings. Industrial trials with this bath composition showed reduction in zinc consumption, reduction of ash and dross, and good luster of workpiece.

• Corrosion Science and Technology
• /
• v.9 no.5
• /
• pp.175-186
• /
• 2010

The auto industry is demanding more ductile high-strength steel grades to build lighter and stronger car bodies. The hot-dip galvanizing problems of these new steel grades are creating a demand for an improved method to control zinc wettability. The simplest way to improve zinc wettability on industrial hot-dip galvanizing lines is to increase the strip immersion temperature at zinc bath entry for enhancing the aluminothermic reaction. However, this practice increases the reactivity due to overheating the zinc in the snout which induces the formation of brittle Fe-Zn compounds at the strip/coating interface with the formation of higher amounts of dross in the zinc bath and snout contamination. Thus, this simple practice can only be utilized for short production periods of one to two hours without deteriorating coating quality. This problem has been solved by employing a technique that allows the use of a higher and attuned strip immersion temperature at zinc bath entry while still maintaining a constantly low zinc bath temperature. This has been proven to provide the solution for both the improved wettability and a significant reduction in the amounts of dross in the zinc bath.

• Textile Coloration and Finishing
• /
• v.23 no.3
• /
• pp.163-168
• /
• 2011

In this article, we synthesized an azo dye rotaxane containing bis(8-hydroxyquinoline) group and its polymeric metal complex with zinc. The azo dye rotaxane exhibits high pH sensitivity, solvatochromism and zinc (II) ion sensings in aqueous solution. These behaviors came from the tautomeric equilibrium between azo-hydrazone tautomers and the formation of extended conjugation. The structure of polymeric zinc complexed dye rotaxane was confirmed with NMR and FT-IR measurements. The existence of CD rings, provided by dye rotaxane formation, was found to be very beneficial in improving aqueous solubility of polymeric metal complex.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.05a
• /
• pp.78-85
• /
• 2006

In textile industries, waste effluent containing zinc is generated during the manufacture of rayon yarn from the wood pulp or cotton linters. Due to the strict environmental regulations and the presence of toxic metallic and other constituents, the discharge of industrial effluents in the sewage or disposal of solid sludge as landfill is restricted. Before recycling of zinc as zinc sulphate solution to the spinning-bath of the rayon manufacturing plant the zinc sulphate solution must be free from calcium, which is deleterious to the process as gypsum precipitates with the increase in concentration and forms scale in the bath. In the present work an attempt has been made to develop a process following solvent extraction technique using thiophosphinic extractants, Cyanex 272 and 302 modified with isodecanol and diluted in kerosene to recover zinc from rayon effluent. Various process parameters viz. extraction of zinc from different concentration of solution, distribution ratio, selective extraction, O/A ratio on extraction and stripping from the loaded organic, complex formation in the organic phase etc. have been studied to see the feasibility of the process. The extractant Cyanex 302 has been found selective for the recovery of 99.99% of zinc from the effluent above equilibrium pH 3.4 maintaining the O/A ratio of 1/30 leaving all the calcium in the raffinate. It selectively extracted zinc in the form of complex $[R_{2}Zn.3RH]_{org}$ and retained all the calcium in the aqueous raffinate. The zinc from the loaded Cyanex 302 can be stripped with 10% sulphuric acid at even O/A ratio of 10 without affecting the stripping efficiency. The stripped solution thus obtained could be recycled in the spinning bath of the rayon plant. The raffinate obtained after the recovery of zinc could be disposed safely without affacting environment.