• 자원리싸이클링
• /
• 제12권4호
• /
• pp.30-37
• /
• 2003

황산 용액에서 Zinc-ferrite의 용해에 대한 반응속도론을 황산 용액의 반응온도와 농도 변화에 대해 조사하였다. 반응율(R)과 겉보기 반응 속도상수(K)는 황산 용액의 온도와 농도가 클수록 증가한다. Zinc-ferrite의 반응속도는 반응초기에서 $1-(1-K)^{1/3}=Kt$와 같은 속도식을 적용할 수 있다. 용해에 대한 활성화 에너지는 황산 용액의 농도에 관계없이 약 16.3kcal/mole 이다. Zinc-ferrite가 황산 용액에서 용해할 때는 Zinc-ferrite의 화학 양론적 조성으로 용해되며, Fe 또는 Zn의 단독으로는 용해되지 않는다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.971-972
• /
• 2006

Mechanochemical synthesis of zinc ferrite, $ZnFe_2O_4$, was attempted from a powder mixture of iron (III) oxide, alpha-$Fe_2O_3$ and zinc (II) oxide, ZnO. Nanocrystalline zinc ferrite, $ZnFe_2O_4$ powders were successfully synthesized only bymilling for 30 hours. Evidence of the $ZnFe_2O_4$ formation was absent for the powders milled for 10 and 20 hours; the milling lowered the crystallinity of the starting materials. Heating after milling enhanced the formation of $ZnFe_2O_4$, crystal growth of $ZnFe_2O_4$ and the unreacted starting materials. The unreacted starting materials decreased their amounts by heating at higher temperatures.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.351-356
• /
• 1997

The origin of the variation of initial permeability in manganese-zinc ferrite polycrystals with a content of hematite was investigated. Initial permeability showed maximum with hematite content while there was no significant change in microstructure. Saturation magnetization increased with hematite content. So the variation of initial permeability was not explained on the basis of microstructural change or saturation magnetization. Temperature dependence of initial permeability revealed magnetocrystalline anisotropy was the origin of the variation of initial permeability. The change in magnetocrystalline anisotropy was ascribed to the variation in ferrous ion concentration. Therefore the variation of initial permeability in manganese-zinc ferrite polycrystals with a content of hematite was due to ferrous ion concentration via magnetocrystalline anisotropy.

• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.703-709
• /
• 2006

We report on the synthesis of highly uniform, single phase zinc and cobalt thin films prepared by the Liquid Phase Deposition (LPD) method. X-Ray diffraction, TGA and EDX measurements support the assumption that the as deposited films are constituted by a mixture of crystallized FeOOH and amorphous M(OH)$_2$ (M=Co, Zn) which is converted upon heat treatment in air at 600?C into the corresponding zinc ferrites. The films with adjustable chemical compositions are identified with a crystal structure as spinel-type and present a spherical or rod-like microstructure, depending on the both the nature and concentration of the divalent transition metal ions. Zinc ferrite thin films present a superparamagnetic behavior above blocking temperatures which decrease with increasing the Zn content and are ferromagnetic at 5 K with coercivities ranging between 797.8 and 948.5 Oe, whereas the cobalt ferrite films are ferromagnetic at room temperature with magnetic characteristics strongly dependent on the chemical composition.

• 한국환경보건학회지
• /
• 제17권1호
• /
• pp.39-49
• /
• 1991

고온에서 황화수소(H$_{2}$S)를 제거하기 위한 흡착제를 개발할 목적으로 ZnO에 $Fe_{2}O_{3}$를 5~50 atomic %까지 첨가시켜 제조한 다공성 흡착제와 황화수소와의 반응(sulfidation)을 thermogravimetric analyzer (Shimadzu DT-30)로 수행하였으며, 고정층세서 zinc ferrite 흡착제의 흡착능을 측정하였다. 반응온도는723$^{\circ}$K~973$^{\circ}$K범위이며, 반응기체는 황화수소(2vol.%)와 질소와 혼합기체로서 total gas flow rate는 200ml/min으로 고정시켰다. Grain Model을 사용하여 실험데이터를 분석한 결과 전화율이 낮을 때 zinc ferrite와 황화수소 반응의 율속단계는 화학반응이었고 황화수소 농도에 대해 1차 반응이었다. 실험한 흡착제 중 10 atomic %의 $Fe_{2}O_{3}$를 첨가하여 제조한 zinc ferrite형 흡착제가 반응속도, 흡착능, 그리고 재생성면에서 우수한 흡착제로 밝혀졌다.

• Advances in nano research
• /
• 제13권5호
• /
• pp.437-451
• /
• 2022

Synthesis approaches usually affect the physical and chemical properties of ferrites. This helps ferrite materials to design them for desired applications. Some of these methods are mechanical milling, ultrasonic method, micro-emulsion, co-precipitation, thermal decomposition, hydrothermal, microwave-assisted, sol-gel, etc. These methods are extensively reviewed by taking example of ZnFe₂O₄. These methods also affect the microstructure and local structure of ferrite which ultimately affect the physical and chemical properties of ferrites. Various spectroscopic techniques such as Raman spectroscopy, Fourier Transform Infrared spectroscopy, Ultra Violet-Visible spectroscopy, Mossbauer spectroscopy, extended x-ray absorption fine structure, and electron paramagnetic resonance are found helpful to reveal this information. Hence, the basic principle and the usefulness of these techniques to find out appropriate information in ZnFe₂O₄ nanoparticles is elaborated in this review.

• 한국자기학회지
• /
• 제17권2호
• /
• pp.71-75
• /
• 2007

계면활성제를 첨가한 음향화학적 침전법으로 두 가지 크기의 아연페라이트 나노입자를 합성하였다. 열분석장치(TGA/DSC)를 이용하여 열적 특성 및 결정화 온도를 조사하였고, 결정구조 확인을 위하여 X선 회절실험을 실시하였다. 제조된 입자는 $240^{\circ}C$ 부근에서 결정생성이 시작되었으며, 결정구조는 전형적인 스피넬 구조를 나타내었다. Scherrer식에 의해 측정된 입자의 크기는 11.2nm와 13.4nm이었다. SQUID를 통하여 자기적 성질을 분석한 결과, 작은 크기의 입자에 대한 방해온도 $T_B$(Blocking temperature)가 큰 입자의 경우보다 더 높게 나타났다.

• 자원리싸이클링
• /
• 제17권1호
• /
• pp.66-72
• /
• 2008

폐알칼리망간전지로부터 침출과 공침반응을 이용하여 Mn-Zn ferrite 분말을 제조하기 위한 기초실험을 수행하였다. 100g/L 광액 농도 3.0M $H_2SO_4$, $60^{\circ}C$ 및 교반속도 200 rpm의 조건에서 과산화수소 30ml를 첨가하여 얻어진 아연과 망간의 침출율은 각각 97.9%, 93.9% 이상이었으며, 침출용액을 가지고 반응시간, 반응온도, $O_2$ 가스량을 조절하며 공침반응을 진행하였다. 공침반응 결과 pH 12, $80^{\circ}C$, $O_2$ 1.3L/min, 교반속도 400 rpm의 조건에서 Mn-Zn ferrite를 저온 합성할 수 있었다. 합성된 Mn-Zn ferrite분말은 $0.143{\mu}m$의 구형 ferrite로서 80 emu/g의 포화자화값을 가지고 있었다.

• 한국세라믹학회지
• /
• 제32권10호
• /
• pp.1123-1130
• /
• 1995

In the preparation of manganese zinc ferrite powders by alcoholic dehydration of citrate/formate solution. The effect of pH change on precipitation was investigated. The pH range for obtaining stable precipitates was studied. The glassy phase was obtained when the pH value of solution is higher than 5, and the formation mechanism of glassy phase was suggested. Below pH 5, the stable precipitates were formed, and the optimal pH was 2. Formation of glassy phase was accounted for the change of surface charge by pH change. The change of surface charge is caused by the interparticular agglomeration. The precipitate was redissolved into the water on the surface of precipitate itself and through the polymerization, it agglomerated. This mechanism is tought to be similar to that of viscous flow.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2017년도 임시총회 및 하계학술연구발표회
• /
• pp.114-114
• /
• 2017