• Title/Summary/Keyword: zhiming

Search Result 34, Processing Time 0.023 seconds

IMPROVEMENTS OF SWITCHED-CAPACITOR NETWORKS TO THE PERFORMANCE OF SWITCHING DC-DC CONVERTERS

  • Liu, Jian;Chen, Zhiming;Yan, Baiping
    • Proceedings of the KIPE Conference
    • /
    • 1998.10a
    • /
    • pp.197-200
    • /
    • 1998
  • Three switched-capacitor(SC) networks are presented including series-parallel capacitor set, reversed-switched-capacitor network and push-pull switched-capacitor network, the performances of which are discussed. Combining the SC networks with traditional DC-DC converters, we form several new topologies. Experiment and analyzed results show that the behavior of a DC-DC converter with large voltage ratio can be improved. A wider voltage conversion range is also obtained.

  • PDF

POWER GTO WITH COMPENSATED RING ANODE-SHORT

  • Zhang Changli;Chen Zhiming;Kim, S.C.;Min, W.G.;Park, J.M.;Kim, N.K.;Kim, E.D.
    • Proceedings of the KIPE Conference
    • /
    • 1998.10a
    • /
    • pp.241-245
    • /
    • 1998
  • This paper gives the novel design of compensated ring anode-short for power GTO thyristor. By means of this design the power GTO of $\Phi$63.5mm 2500A/4500V reaches more uniform turn-off compared with conventional ring short GTO, resulting in higher turn-off ability and low tail current/tail time.

  • PDF

A NOVEL ZVS-CV PWM AC-DC CONVERTER

  • Yan, Baiping;Chen, Zhiming;Liu, Jian
    • Proceedings of the KIPE Conference
    • /
    • 1998.10a
    • /
    • pp.709-712
    • /
    • 1998
  • A new ZVS-CV PWM converter with power factor correction (PFC) function is presented in this paper. The new topology is a integration of a boost converter and a ZVS-CV topology in a single power conversion stage. The new converter can be regulated in pulse-width modulation (PWM) by universal integrated control circuits. Some design considerations are given in detail. A laboratory prototype has been implemented to show the feasibility of the approach and the analysis.

  • PDF

Preparation of Highly Visible-Light Photocatalytic Active N-Doped TiO2 Microcuboids

  • Zhao, Kang;Wu, Zhiming;Tang, Rong;Jiang, Yadong
    • Journal of the Korean Chemical Society
    • /
    • v.57 no.4
    • /
    • pp.489-492
    • /
    • 2013
  • N-doped $TiO_2$ microcuboids were successfully prepared by a simple one-pot hydrothermal method. The samples were characterized by X-ray diffraction, scanning electron microscopy, diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy. It was found that the N-doped $TiO_2$ microcuboids enhanced absorption in the visible light region, and exhibited higher activity for photocatalytic degradation of model dyes. Based on the experimental results, a visible light induced photocatalytic mechanism was proposed for N-doped anatase $TiO_2$ microcuboids.

SOFT RECOVERY CHARACTERISTICS OF POWER DIODE BY PROTON IRRADIATION

  • Zhang Changli;Chen Zhiming;Park, J.M.;Min, W.G.;Kim, S.C.;Kim, N.K.;Kim, E.D.
    • Proceedings of the KIPE Conference
    • /
    • 1998.10a
    • /
    • pp.231-234
    • /
    • 1998
  • The soft reverse recovery characteristics of P-I-N power diodes by different lifetime killer were compared in this paper. It was concluded that the best local lifetime control at N- base was achieved through the optimization of penetrated depth into the wafer by 5 MeV proton irradiation, resulting in significant soft recovery performance in our study. The results of 5∼12 MeV electron irradiation and platinum diffusion were also discussed here.

  • PDF

Application of Learning Control to a Robotic Arm for Exercises (운동기구용 로봇의 학습 제어 응용)

  • Ryu, Yeong Soon;Ji, Zhiming
    • Transactions of the Korean Society for Noise and Vibration Engineering
    • /
    • v.12 no.8
    • /
    • pp.609-615
    • /
    • 2002
  • An application of a simple and effective learning control scheme to a robotic arm for exercise is presented. During exercises, the force applied by a .user to an exercise machine varies for different users and for different workouts of the same user. learning control is used to compensate for the difference between the actual force and the planned one. It is shown through simulation that the learning control method decreases tracking error quickly for both time-invariant and time-varying forcing functions.

Self-oscillation topology for high frequency induction heating system (자기공진 토폴로지에 의한 고주파 유도가열 시스템)

  • Choi, Woo-Seok;Lee, Won-Jin;Wang, Zhiming;Park, Sung-Jun
    • Proceedings of the KIPE Conference
    • /
    • 2013.07a
    • /
    • pp.395-396
    • /
    • 2013
  • 고주파 유도가열 시스템은 고효율 및 생산의 편의성으로 산업 전반에 걸쳐 다양하게 적용되고 있다. 이러한 고주파 유도 가열 시스템은 크게 정류부, 전압조절부, 공진형 인버터로 구분된다. 공진형 인버터는 공진 주파수로 스위칭 시, 순수 실수 어드미턴스만 남게 되어 최대 효율을 얻는다. 공진 주파수는 공진회로의 입력 어드미턴스에 의해 결정되는데, 용융과정에서 피가열체의 저항 값은 시간에 따라 변화한다. 이는 전체 입력 어드미턴스의 변화와 공진 주파수의 변화로 나타나고, 효율이 저하되는 단점이 있다. 본 논문에서는 공진 인버터의 공진 주파수를 스스로 추종하는 자기공진 추종 토폴로지를 제안한다. 제안된 토폴로지는 고주파 유도가열 시스템의 용융과정에서 피가열체의 저항 값이 시변하여 공진 주파수가 이동하더라도 반주기 내에 정확하게 추종 동작을 한다. 본 논문에서는 제안된 자동 공진 추종회로를 기존의 병렬 공진 유도가열 시스템에 적용하여 타당성을 검증하였다.

  • PDF