• 제목/요약/키워드: zero-rating

검색결과 67건 처리시간 0.026초

Implementation of a ZVS Three-Level Converter with Series-Connected Transformers

  • Lin, Bor-Ren
    • Journal of Power Electronics
    • /
    • 제13권2호
    • /
    • pp.177-185
    • /
    • 2013
  • This paper studies a soft switching DC/DC converter to achieve zero voltage switching (ZVS) for all switches under a wide range of load condition and input voltage. Two three-level PWM circuits with the same power switches are adopted to reduce the voltage stress of MOSFETs at $V_{in}/2$ and achieve load current sharing. Thus, the current stress and power rating of power semiconductors at the secondary side are reduced. The series-connected transformers are adopted in each three-level circuit. Each transformer can be operated as an inductor to smooth the output current or a transformer to achieve the electric isolation and power transfer from the input side to the output side. Therefore, no output inductor is needed at the secondary side. Two center-tapped rectifiers connected in parallel are used at the secondary side to achieve load current sharing. Due to the resonant behavior by the resonant inductance and resonant capacitance at the transition interval, all switches are turned on at ZVS. Experiments based on a 1kW prototype are provided to verify the performance of proposed converter.

3[kW]급 주택용 연료전지시스템에 사용되는 새로운 DC-DC 컨버터 (A novel DC-DC Converter for 3[kW] Fuel Cell System Residential Application)

  • 이수호;문상필;이현우;서기영;권순걸
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.362-364
    • /
    • 2006
  • This paper presents a novel DC-DC Converter for 3 [kW] Fuel Cell System Residential Application. Phase shifted control is employed to regulate the output voltage and achieve soft switching. The transformer leakage inductance is utilized effectively to achieve zero voltage turn on for the power semiconductor switches. The current doubler rectifier has only one diode drop. The transformer secondary winding current rating is one half the load current. The overall effciency of the converter is improved.

  • PDF

멀티레벨 인버터를 이용한 SRM 운전특성 (Characteristic of SRM Drive using Multi-level Converter)

  • 왕혜군;이상훈;이동희;안진우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.100-102
    • /
    • 2007
  • In this paper, a modified multi-level convert for low cost high speed switched reluctance (SR) drive is proposed The proposed multi-level converter has reduced number of power switches and diodes than that of a conventional asymmetric converter for SRM, and lower voltage rating of the dump capacitor comparing with energy efficient c-dump converter. It can supply five operating modes that is boosted, DC-link, zero, negative bias and negative boosted voltage. The proposed multi-level converter has fast excitation and demagnetization modes of phase current, so dynamic response can be achieved. The proposed multi-level converter is verified by computer simulation and experimental results.

  • PDF

A New-Generation Sensorless Vector Control Scheme for Induction Motor Drive

  • Shinnaka, Shinji
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
    • /
    • pp.287-292
    • /
    • 1998
  • This paper presents some results of performance evaluation test via actual machines of a new hybrid vector control utilizing a new indirect orientation scheme and stable filter embedded direct orientation scheme for induction motors without speed or position sensor. It is shown through the test by 0.3(kW) and 3.7(kW) motors that the proposed sensorless vector control has the following high potentialities: 1) speed range is 0 to 600(rad/s) or more, 2) zero-speed command is accepted and settles the machines at a stable standstill with no vibration 3) it can make machines to track variable command of acceleration and deceleration $\pm$6,000(rad/s2), 4) it can make machines to drive directly load of at least 26 times larger inertia than that of the machine, 5) it can make machines to produce much larger torque than the rating in torque control mode even at standstill. The performance confirmed by the test is far away for previous schemes or sensorless drive apparatuses.

  • PDF

A Novel Energy Recovery Sustaining Driver with Snubber Circuits for Plasma Display Panel

  • Chen, Jyh-Wei;Lee, Chin-Yuan;Lu, Chien-Hung;Wang, Ssu-Hao;Hsia, Yi-Feng;Chang, Wei-Chun;Mo, Chi-Neng;Liu, Chia-Lin;Yang, Sung-Tse
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
    • /
    • pp.635-638
    • /
    • 2005
  • An energy recovery sustaining driver with zero current switching to reduce switching losses and EMI is presented in this paper. The driver with designed snubber circuits reduces ringing voltage significantly on PDP so that the voltage rating of MOSFETs can be lower as well to reduce the cost of switches.

  • PDF

고역율 및 저도통손을 갖는 ZVT PWM 단상 정류기 (Zero-Voltage-Transition PWM Single-Phase Rectifier with Reduced Conduction Loss and Unity Power Factor)

  • 최성훈;이병철;팽성환;김인동;노의철
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2005년도 전력전자학술대회 논문집
    • /
    • pp.546-548
    • /
    • 2005
  • This paper proposes a unity power factor ZVT PWM single-phase rectifier. The ZVT soft switching are achieved by using a simple ZVT circuit, and the reduced conduction losses are achieved by employing a single-stage converter, instead of a typical double-stage converter composed of front end diode rectifier and cascaded boost rectifier. Furthermore, thanks to good features such as simple PWM control at constant frequency, low switch stress and low VAR rating of commutation circuits, it is suitable for high power applications. The principle of operation is explained in detail, and simulation results of the new converter are also included.

  • PDF

최적 전류파형제어를 통한 브러시리스 DC 발전기의 출력밀도 최대화에 관한 연구 (Power Density Maximization of the Brushless DC Generator by Controlling the Optimal Current Waveform)

  • 이형우
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제53권7호
    • /
    • pp.430-436
    • /
    • 2004
  • This paper presents an advanced control technique for power density maximization of the Brushless DC (BLDC) generator by using the linear tracking method. In a generator of given rating, the weight and size of the system affect the fuel consumption directly. Therefore, power density is one of the most important issues in a stand-alone generator. BLDC generator has high power density in the machine point of view and additional increases of power density by control means can be expected. Conventional rectification methods cannot achieve the maximum power possible because of hon-optimal current waveforms. The optimal current waveform to maximize power density and minimize machine size and weight in a nonsinusoidal power supply system has been derived, incorporated in a control system, and verified by simulation and experimental work. A new simple algebraic method has been proposed to accomplish the proposed control without an FFT which is time consuming and complicated.

망중립성 논의의 쟁점과 함의 (The Debate on Net Neutrality: Evidences, Issues and Implications)

  • 정동훈
    • 정보화정책
    • /
    • 제25권1호
    • /
    • pp.3-29
    • /
    • 2018
  • 2017년 12월 14일, 미국 연방통신위원회가 망중립성 폐지를 결정했다. 그동안 오바마 정부에서 일관되게 유지해온 망중립성 원칙과는 정반대의 결과이다. 망중립성 폐지가 가지고 올 후폭풍은 개인과 산업 전 영역에 미칠 정도로 광범위하며, 전 세계 인터넷 콘텐츠와 플랫폼 시장을 압도하는 미국의 콘텐츠 업계에 몰고 올 파장은 가늠하기 어려울 정도이다. 반면 한국의 망중립성 원칙은 확고하게 진행되어 왔고 미국의 망중립성 폐지 결정 이후에도 별다른 변화의 징조가 보이지 않는다. 망중립성은 5G를 준비하기 위한 네트워크 고도화의 문제뿐만 아니라 표현의 자유와 같은 헌법과도 관련이 있을 정도로 단순한 주제가 아니다. 이에 따라 본 연구는 망중립성이 그동안 미국과 한국에서 어떻게 진행되어 왔는지 살펴보고, 망중립성이 갖는 쟁점을 네트워크 고도화와 인터넷 서비스 사업자와 인터넷 콘텐츠 사업자의 서로 다른 관점, 헌법적 관점, 비즈니스적 관점, 기술적 관점과 인터넷 자유, 공정거래법과 제로 레이팅 등 다양한 논의점으로 분석하고자 한다. 시장 경제와 공정 경쟁 그리고 전 산업의 발전과 소비자 편익 극대화에 맞추어져야 하는 망중립성 논의를 통해 향후 국내 망중립성 정책 방향과 시사점을 살펴보고자 한다.

동기 정류기를 이용한 태양광 모듈용 플라이백 인버터 소프트 스위칭 제어 기법 (Soft Switching Control Method for Photovoltaic AC Module Flyback Inverter using Synchronous Rectifier)

  • 장진우;김영호;최봉연;정용채;원충연
    • 전력전자학회논문지
    • /
    • 제18권4호
    • /
    • pp.312-321
    • /
    • 2013
  • In this paper, high efficiency control method for flyback inverter with synchronous rectifier(SR) based on photovoltaic AC modules is proposed. In this control method, the operation of SR is classified according to the voltage spike across main switch SP. When the voltage spike across SP is lower than the rating voltage of SP, the operation of active clamp circuit is interrupted for reducing the switching loss of auxiliary switch. In this time, the SR is operated for soft-switching of SP. When the voltage spike across Sp is higher than the rating voltage of SP, the operation of active circuit is activated for reducing the voltage spike. The SR is operated for reducing the conduction loss of secondary output diode. Thus, a switching loss of the main switch can be reduced in low power region, and weighted-efficiency can be improved. A theoretical analysis and the design principle of the proposed method are provided. And validity is confirmed through simulation and experimental results.

정량화 시뮬레이션 모델을 활용한 단계적인 건축물에너지효율등급 향상 방안 (Stepwise Technique for Improving Building Energy Efficiency Rating Utilizing Quantified Simulation Model)

  • 김기석;김유민;김종성;오세규
    • KIEAE Journal
    • /
    • 제14권6호
    • /
    • pp.65-73
    • /
    • 2014
  • Due to the Climate change and resource shortage by global warming, various problems are rising and getting worse around the world. Many countries are doing the considerable efforts to reduce greenhouse gas emissions. The government of South Korea also plans to decrease greenhouse gas emission, the various pilot projects are underway, which includes obligation of energy efficiency 1st rating and greenhouse gas target management system of public buildings. In particular, luxurious government office buildings and energy-wasting public building have issued and emerged as a social problem. Energy efficiency improvement of the existing public office buildings are becoming an important issue recently. This study is proposed the step-by-step energy improvement model according to the building energy efficiency rate in order to reduce the energy consumption. To attain this end, I set up a base model by analyzing the current architectural conditions of the existing public office buildings and grasped the specific properties of building energy consumption through energy simulations. Furthermore, I suggested phased reduction prototypes for the reduction target of energy consumption by applying the methods of the zero energy building plan. This study is expecting that prototypes would give directions when it comes to planning the implementation policy of phased building plan factors, according the building energy consumption reduction goal in the existing public office buildings which are the subject of building energy target management system.