• Steel and Composite Structures
• /
• v.48 no.1
• /
• pp.19-25
• /
• 2023

Due to high application of concrete structures in construction industry, however, the quality improvement is essential. One of the new ways for this purpose is adding the nanoparticles to the concrete. In this work, vibration analysis of concrete beams reinforced by graphene oxide (GO) nanoparticles based on mathematical model has been investigated. For the accuracy of the presented model, the experimental study is done for comparing the compressive strength. Since the nanoparticles can not be solved in water without any specific process, at the first, GO nanoparticles should be dispersed in water by using shaker, magnetic striker, ultrasonic devices and finally mechanical mixer. For modelling of the strucuture, sinusoidal shear deformation beam theory (SSDBT) is utilized. Mori-Tanak model model is utilized for obtaining the effective properties of the beam including agglomeration influences. Utilizing the energy method and Hamilton's principal, the motion equations are calculated. The frequency of the concrete beam is obtanied by analytical method. Three samples with 0.02% GO nanoparticles are built and its compressive strength is compared which shows a good accuracy with maximum 1.29% difference with mathematical model and other papers. The aim of this work from the theoretical study is investigating the effects of nanoparticles volume percentage and agglomeration, length and thickness of the beam on the frequency of the structure. The results show that the with enhancing the GO nanoparticles, the frequency is increased. For example, with enhancing the volume percent of GO nanoparticles from zero to 0.08%, the compressive strength is increased 48.91%. and 46.83%, respectively for two cases of with and without agglomeration.

• Journal of The Korean Astronomical Society
• /
• v.56 no.1
• /
• pp.97-115
• /
• 2023

We present the deep homogeneous UBV RI photometric data of 135,071 stars down to V ~ 23 mag and I ~ 22 mag toward the Carina Nebula. These stars are cross-matched with those from the previous surveys in the X-ray, near-infrared, and mid-infrared wavelengths as well as the Gaia Early Data Release 3 (EDR3). This master catalog allows us to select reliable members and determine the fundamental parameters distance, size, stellar density of stellar clusters in this star-forming region. We revisit the reddening toward the nebula using the optical and the near-infrared colors of early-type stars. The foreground reddening [E(B-V)_fg] is determined to be 0.35 ± 0.02, and it seems to follow the standard reddening law. On the other hand, the total-to-selective extinction ratio of the intracluster medium (R_V,cl) decreases from the central region (Trumpler 14 and 16, R_V,cl ~ 4.5) to the northern region (Trumpler 15, R_V,cl ~ 3.4). It implies that the central region is more dusty than the northern region. We find that the distance modulus of the Carina Nebula to be 11.9 ± 0.3 mag (d = 2.4 ± 0.35 kpc) using a zero-age main-sequence fitting method, which is in good agreement with that derived from the Gaia EDR3 parallaxes. We also present the catalog of 3,331 pre-main-sequence (PMS) members and 14,974 PMS candidates down to V ~ 22 mag based on spectrophotometric properties of young stars at infrared, optical, and X-ray wavelengths. From the spatial distribution of PMS members and PMS candidates, we confirm that the member selection is very reliable down to faint stars. Our data will have a legacy value for follow-up studies with different scientific purposes.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.26 no.3
• /
• pp.13-33
• /
• 2024

This study aims to analyze the potential and limitations of using traditional men's suits as upcycled materials by examining case studies of deconstructed and reassembled designs. The research explores the potential of upcycled suit design and proposes data to guide future directions in upcycling. A literature review was conducted, revealing that upcycled designs are often created through deconstruction, within the framework of Jacques Derrida's deconstructionist philosophy. The study examined 10 brands that focused on suit-based upcycled designs across two or more seasons, resulting in 202 upcycled suit products for analysis to identify key design characteristics. Upcycle suits have been shown to be disordered decentralized properties through deformation, discontinuity through deformation, and damage through reconstruction of existing suits. First, deformation was expressed in the design of a typical dressing, asymmetry, overlap, distortion, and repetition. Second, deformation mainly appeared as a method of omission, heterogeneous insertion, material conversion, and separation. Third, damage appeared as a doodle, tear, and incomplete up-cycle design method. Using these methods, three decentralized upcycle suit designs were developed, and a new direction of upcycle design was suggested. The study concludes that upcycled suit design can contribute to sustainable fashion by achieving zero waste, developing refined sewing techniques, pursuing diverse design methods, and promoting transparency in production. This research offers insights into innovative and diverse product development through the reinterpretation of discarded suits.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.1
• /
• pp.19-29
• /
• 2013

Effects of current density, electrodeposition temperature and solution pH on properties of Cu thin films electrodeposited from pyrophosphate bath were investigated. Current efficiency was decreased with increasing current density and increased with increasing temperature. But solution pH slightly influenced on current efficiency and current efficiency was measured to be above 90% at both room temperature and $55^{\circ}C$. Residual stress of Cu thin film electrodeposited at room temperature was decreased with increasing current density, while current density reaches to 60 $mA/cm^2$ or more, stress became close to zero. Cu thin films electrodeposited at $55^{\circ}C$ exhibited the residual stress range of 0~40 MPa. At room temperature, dendritic surface morphology was observed above the current density of 30 $mA/cm^2$ and at $55^{\circ}C$, above the current density of 100 $mA/cm^2$. Cu thin films electrodeposited from bath solution with room temperature and $55^{\circ}C$ mainly consisted of (111) peaks. Specially, Cu thin film electrodeposited at 30 $mA/cm^2$ and $55^{\circ}C$ exhibited strong preferred orientation of (111) peaks.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.508-512
• /
• 1998

The NTC thermistors were sintered by using microwave hybrid heating method at $1100^{\circ}C$~$1300^{\circ}C$ and those electrical properties were investigated. The obtained $B_{25^{\circ}C/85^{\circ}C}$ values from temperature dependence of electrical resisitivity were around 3100~3200 K which were almost the same values as conventionally sintered ones. Compared with conventional sintering process, this process could complete whole sintering process within 20 minutes. This the processing time and energy consumption could be reduced through this rapid heating by using microwave hybrid heating.t there were showed only two peaks, glycolide melting peak and lower molecular weight melting peak without lauryl alcohol. Conversion increased slowly with the reaction time up to 50 minutes, and then gave a sudden increase above that. The reaction time to disappear in glycolide melting peak during polymerization was shortened with the increase of lauryl alcohol content. Zero-shear viscosity of polyglycolic acid decreased with the increase of free acid content in glycolide.ssional energy and bending hysteresis increased. \circled3 Surface characteristics such as friction coefficient and thickness variation of highly shrinkage fabrics became relatively roughened state. \circled4 Since stiffened and roughened characteristics of highly shrinkage fabrics, drapabilities of them were significantly lowered. Additionally thermal insulation property of high shrinkage fabric was higher than that of low shrinkage fabric due to bulky and thickened feature. From the results, it is considered that the silk fabrics with high filling shrinkage have the good bulkiness and heat keeping properties and thus they have the suitable characteristics for high quality men's and women's formal garments.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.377-382
• /
• 1998

This study was carried out to investigate the relation between surface acidity and interfacial electrical characteristics of surface-treated ${\gamma}-alumina$ whose surface activity was increased. The points of zero charge (P. Z. C.) of ${\gamma}-alumina$ whose surface is treated with the sulfuric, nitric and hydro-chloric acid of various concentration were measured from the site-binding theory and mass transport method. The surface active sites were measured by amine titration method and Hammett indicator method. The interfacial properties at alumina/KCl(aq) interface were measured by potentiometric titration. From the experimental results, the following results were obtained. Pure ${\gamma}-alumina$ surface acidity decreases with the increase of calcination temperature at strength $H_o{\leq}+9.3$ Surface-treated alumina acidic properties increase with the anion loading on alumina surface. The surface ionization constants decrease with anion loading on alumina surface, then P. Z. C. decreases with acid amount on alumina surface. Acid amount of surface treated alumina can be correlated with surface charge density at strength $H_o{\leq}+4.8$ as follows. $SO_4^2-/Al_2O_3:Q_A=-0.172ln(0.0418{\sigma}+1.448)$ $NO_3^-/Al_2O_3:Q_A=-0.024{\sigma}-0.0189$ $Cl^-/Al_2O_3:Q_A=-0.01{\sigma}-0.2006$.

• Korean Journal of Pharmacognosy
• /
• v.25 no.3
• /
• pp.238-248
• /
• 1994

The hypoglycemic and metabolic effects of Commelina communis L. extract were investigated in alloxan induced diabetic rats. The increased blood glucose level in the diabetic rats was significantly reduced and the loss of body weight was recovered with the treatment of the plant protein fractions($30{\sim}70%$ ammonium sulfate precipitates). Administration of the plant protein fractions elicited the significant increase of glucose-6-phosphate dehydrogenase (G-6-P DH) activity and liver weight which were decreased in the diabetic rat liver. G-6-P DH was partially purified from extract- or insulin-treated diabetics, diabetic control, and normal rat liver and studied for the biochemical properties. The $K_m$ value(9.002 mM) of diabetic rat liver enzyme was greatly higher than that (0.033 mM) of normal enzyme indicating the affinity of enzyme for the substrate was significantly reduced in the diabetic rat liver. This reduced affinity of enzyme for the substrate in the diabetic rat was recovered in the extract- or insulin-treated rat liver enzyme having 0.164 or 0.208 mM of their $K_m$ values, respectively. Although there was no significant difference in the optimum pH(6.0) and optimum temperature($37^{\circ}C$) of enzyme among the experimental groups, the dependence of their activities on pH appeared to be slightly resistant in the extract- or insulin-treated group compared to the diabetic group. In order to investigate the antigenicity of rat liver enzyme among experimental groups, enzyme-linked immunosorbent assay was carried out by using anti-G-6-P DH anti-serum. Absorbance(0.102) shown in the normal rat liver was reduced even below zero in the alloxan-diabetic rat liver, but increased again in the extract- or insulin-treated rat liver(0.096 or 0.118, respectively). The result of this study suggested that G-6-P DH may be used as a marker enzyme to diagnose and to indicate the progress of the diabetics, and the hypoglycemic effect of the extracts of Commelina communis L. was certainly associated with action or mode of G-6-P DH on the rat liver.

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.218-222
• /
• 2000

W-Ti film properties for X-ray absorber applications have been investigated with Ti composition have been investigated with Ti composition variation. W-Ti films were deposited by DC magnetron sputtering system. As the working pressure increases, film density decreases and film stress changes from compressive to tensile. The transition pressure (where the film stress in zero) and the stress gradient decrease by adding Ti into W-Ti(6.5 at.%) film shows the smallest stress gradient and transition pressure. It also shows high density ($17.7g/\textrm{cm}^3$) similar to that of pure-W ($17.8g/\textrm{cm}^3$) at the transition pressure. All the films show columnar structure, and its size decreases with increasing Ti composition. Surface roughness and thermal stability are improved by Ti-addition, resulting in a better property for X-ray absorber applications.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.210-216
• /
• 1998

Relationship between population group properties and docosahexaenoic acid (DHA) content of the Pacific oyster had been carried out at the Bukman oyster farm near Tongyeong based on the regular monthly sampling from November 1994 through April 1996. DHA content in lipids was least abundant in June and most abundant in November. Minimum DHA content close to 'zero' in lune suggests that much of DHA are being used for maturing and discharging of eggs and sperms, in consideration of the fact that lure is the spawning periods of the oyster. The corelationships among DHA content, mortality, and growth coefficient, have not been recognized. The approximate positive relations have been acknowledged between DHA content and the individual density in times of harvest, and also the individual weight. But it seems that the relaltions between DHA content and the individual weight are not directly related, rather it seems that it is the result from the population density effects caused by the relations between DHA and the number of individuls. But the meaning of the above mentioned relations can not be clearly defined yet.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.1
• /
• pp.37-42
• /
• 2011

Magnetic properties at low-temperatures can diagnose the presence of certain magnetic minerals in rocks. At the Verwey transition temperature ($T_v$, ~105~120 K), magnetite transforms from monoclinic to cubic structure as the temperature increases. At the isotropic point ($T_i$, ~135 K), magnetocrystalline anisotropic constant of magnetite passes through zero (from negative to positive) as the temperature decreases so that its optimal remanence acquisition axis changes from [111] to [001]. A sharp remanence drop was observed at $T_v$ during warming of LTSIRM (low-temperature saturation isothermal remanent magnetization). For cooling of RTSIRM (room-temperature saturation isothermal remanent magnetization), the remanence decreased on passing $T_i$ and $T_v$. On warming of RTSIRM, remanence recovery becomes more prominent as the average grain size of magnetite increases. In summary, the SIRM memory decreases with increasing grain size of magnetite. A similar, but rather gradual, remanence transition occurs for natural samples due to contribution of cations other than Fe. As a non-destructive tool, low-temperature magnetic behavior is sensitive to unravel the magnetic remanence carriers in terrestrial rocks or meteorites.