• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.240-247
• /
• 2015

Zeolite A was prepared from coal fly ash upon NaOH fusion treatment, followed by hydrothermal treatment. The effects of treatment conditions such as NaOH/ash ratio, fusion temperature, the amount of sodium aluminate added, hydrothermal treatment temperature and time on the type and the crystallinity of zeolites were investigated. The optimal NaOH/ash weight ratio and fusion temperature to produce high crystalline zeolite A were 1.2 and $550^{\circ}C$, respectively. The dissolution of $Si^{4+}$ and $Al^{3+}$ from the fused fly ash was not affected by stirring time. The type of synthetic zeolites was found to be dependent on the amount of sodium aluminate added. The low amount of sodium aluminate favored zeolite X, while a single phase zeolite A was produced by increasing the amount sodium aluminate. Zeolite A was transformed into hydroxysodalite with increasing hydrothermal treatment time and temperature. A high crystalline zeolite A could be obtained by decreasing the temperature increasing time up to the reaction temperature.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.3
• /
• pp.61-71
• /
• 1997

This study was conducted to examine the adsorption capacity of $NH_{3}-N$ by natural zeolite for the purpose of investigating the possibility for $NH_{3}-N$ eliminator of korea natural zeolite. The dominant clay minerals of zeolite was clinoptiloite. The amount of $NH_{3}-N$ adsorption by zeplite was not significantly affected by the particle size of zeolite and increased with increasing the ratio of zeolite to the volume of solution. Removal ratio of 100% of NH$_{3}$-N by non, 1st, 2nd regenerated cloumn was continued separately during 4.5, 18, 30hr and this amount was each 0.081, 0.324, 0.540g $NH_{3}-N/zero$.100g. The eluenting amount of K, Ca, Mg was increased on the zeolite cloumn according to that of Na decreased. The amount of 74% of $NH_{3}-N$ was desorved on the zeolite cloumn for regenerating treatment during 8hr. The perfect removal amount was $0.216gNH_{3}-N/zero$.100g on the zeolite cloumn with field sample.

• Analytical Science and Technology
• /
• v.21 no.1
• /
• pp.58-63
• /
• 2008

Nano-sized ZnO crystals were successfully incorporated using ion exchange method in TMA-A zeolite synthesized by the hydrothermal method. The optimal composition for the synthesis of TMA-A zeolite was resulted in a solution of $Al(i-pro)_3$ : 2.2 TEOS : 2.4 TMAOH : 0.3 NaOH : 200 $H_2O$. 0.3 g of TMA-A zeolite and 5 mol of $ZnCl_2$ solution were employed for the preparation of ZnO incorporated TMA-A zeolite. The crystallization process of ZnO incorporated TMA-A zeolite was analyzed by X-ray diffraction (XRD). The incorporated nano-sized ZnO crystals and the crystallinity of TMA-A zeolite were evaluated by transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The size of the incorporated nano-sized ZnO crystals was 3~5 nm, while the TMA-A zeolite was 60~100 nm. The bonding structure and absorption of the ZnO incorporated TMA-A zeolite were compared with the ZnO and TMA-A zeolite by the FT-IR analysis. Subsequentlly, the ZnO incorporated TMA-A zeolite showed the photoluminescent characteristics on the wavelengths of 330~260 nm and 260~230 nm by measurement of UV spectrophotometer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.2
• /
• pp.130-136
• /
• 1996

This study was carried out easily to determine the refreshing time of natural Zeolite used for the clearing of Livestock waste water and to investigate the relationship between EC of solution and adsorption amount on Zeolite. During the adsorption reaction, EC of supernatant solution decreased till the equilibrium was reached and kept a constant level after it. EC was greatly decreased with the concentration of solution and the magnitude of adsorbent. Decrease in EC of suspension was found to be lesser in addition of Na-Zeolite than Ca-Zeolite. EC change of Livestock waste water was shown to be similar tendency to that of the simulated waste water. On the cumulative adsorption isotherm, the EC of suspension increased until the EC value of the initial solution as the increase in treatment times. Therefore, it is apparent that the exchange point of natural zeolite should be in the vicinity of the EC value of initial waste water.

• Journal of Environmental Health Sciences
• /
• v.33 no.4
• /
• pp.317-324
• /
• 2007

The sewage treatment sludge disposal has become a serious environmental problem because of restricted direct land-filling and oceandumping in spite of their large amounts discharged. So the recycling of sewage treatment sludge is very useful alternative for waste management. Here, we studied the feasibility of zeolite synthesis in open system from the sewage treatment sludge incinerator fly ash by means of hydrothermal synthesis. We considered the concentration of NaOH, reaction time, reaction temperature and reaction step as synthesis variables. The phase of zeolite products was identified by X-ray diffractometer(XRD) and ammonium ion exchange test was performed for the raw fly ash and two zeolite products(Z-3 and Z-5). In leaching test of the raw fly ash, hazard metal is detected very low level compared with regulatory leaching test standard. But in total recoverable test, the total contents of the fly ash were very high in terms of the standard for waste-derived fertilizer. Through hydrothermal reaction, small amount of zeolite P was synthesied in 1 N of NaOH solution and relatively large amount of hydroxysodalite was synthesied in 3 N and 5 N of NaOH solution with similar peak intensity. Addition of an aging step in the synthesis didn't increase the amount of zeolite phase. Maximum $NE_4^+-N$ exchange capacity is 1.49 mg $NH_4^+-N/g$ in Z-3 and 1.38 mg $NH_4^+-N/g$ in Z-5. Most of the ammonium ion is exchanged in 30 minutes and disorption did not occur until 5 hours.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.2
• /
• pp.65-75
• /
• 2013

In this study, the engineering characteristics of volcanic ash-cement soil mixtures and zeolite-cement soil mixtures are investigated by using unconfined compression test, freezing-thawing test, SEM and XRD analysis. The samples were mixed with volcanic ash from Mt. Baekdusan or porous zeolite, and cement as the ratios of 3.5:1, 4.0:1, 4.5:1, 5.0:1 with and without metakaolin. It is confirmed that compressive strength degraded with increasing of the amount of volcanic ash or zeolite, and increased with addition of metakaolin as a binder. Moreover, test results suggested that the mixtures provided sufficient freezing-thawing resistance. In addition, ettringite as a product of cement hydration was detected by SEM and XRD, and that possibly contributes to the strength of the mixtures.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.283.1-283
• /
• 2001

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.3
• /
• pp.217-221
• /
• 1999

This study was carried out to synthesis the zeolite using the bituminous coal fly ash emitted from power plant that occurs several environmental problems. In spite of fly ash has contained high content of $SiO_2$ and $Al_2O_3$, it disposed mainly landfill. If the effective methods to recover the $SiO_2$ and $Al_2O_3$ were developed, the fly ash could be utilized valuable raw materials. In this study, fly ash was used as raw material to synthesize the zeolite by pressurized hydrothermal reaction. Also, experimental parameters included temperature($70{\sim}110^{\circ}C$, and pressure($140{\sim}200$ psi) of crystallization were investigated. The more crystallization pressure was increased, the more Zeolite 4A was synthesized at 70 and $90^{\circ}C$. Zeolite 4A of metastable phase tend to be transformed into sodalite of stable phase at $110^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.685-693
• /
• 1988

From leaching of Korean native halloysite with hot sulfuric acid, active species of siliceous aluminosilicate are obtained as residue, which gives the mole ratio of SiO2/Al2O3 10 and substantially removes most acid-soluble impurities. By dissolving the residue in sodium hydroxide at an ambient temperature sodium silicate solution is prepared, this is used for zeolite synthesis as one of starting materials. In order to prepare zeolite Type 4A thereform, addition of a proper aluminum source is made so that the composition of the reactant materials may be of the following mole ratios : Na2O/SiO2=1.2-1.5, SiO2/Al2O3=1.8-2.0 and H2O/Na2O=34-45 By careful control of ageing time and temperature, subsequent crystal growth is induced into microfine zeolite 4A, which gives optimum particle size distributjion being suitable for detergent builder. The zeolite products thus obtained and highly competitive with those from the use of the refined clay in comparison of their calcium exchange capacity, whiteness and particle size distribution. The present method shows a marginal advantage over the existing procedures requiring neitherseparate purification nor calcinating otherwise necessary for the raw clay ores in use.

• The Journal of Natural Sciences
• /
• v.5 no.1
• /
• pp.67-75
• /
• 1992

In the our country, especially in Yeongil and Wolsung area, abundant authigenic zeolites are found from the tuffaceous sediments and volcanic rocks of Miocene age showing wide variation in their mineralogy and abundance from horizon to horizon. The principal zeolite species identified are clinopti-lolite. mordenite. heulandite. ferrierite, and erionite. etc. Zeolite minerals are widely used in many countries in the following applications; (a) in air separation adsorption processes; (b)as desiccants; (c)in inorganic building materials; (d)in papermaking; (e)in fertilizers; (f)as soilconditioners-this application is based upon the ability of the zeolite to ion exchange with soil nutrients; (g)in the treatment of radioactive wastes; and (h)as adsorbents for toxic gases, etc. In the present paper, using natural zeolite mordenite treated with IN hydrochloric acid or IN sodium chloride solution as column packings, separation characteristics of argon, nitrogen, carbon monoxide, and methane gases have been studied by gas chromatography. By the use of mordenite treated with hydrochloric acid solution, the tailing peak of methane showed from untreated mordenite was satisfactorily reduced, although it was difficult to separate it from carbon monoxide with a column activated at $300^{\circ}C$. Using a column activated at $350^{\circ}C$, methane could be separated from carbon monoxide easily but only carbon monoxide eluted as a bad defined peak. Mordenite treated with sodium chloride solution was generally similar to chromatograms obtained by using the untreated mordenite. Both the above chemical treatments of mordenite had little effect on the separations of argon and nitrogen. The separations and the HETP values obtained from natural zeolite mordenite treated with continuously hydrochloric acid and sodium chloride solutions were almost identical with those obtained with synthetic molecular sieve 5A zeolite. On the other hand, the efficiency of column was good in the range 20~3Oml/min of the carrier helium gas rate.