• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.201-206
• /
• 1999

For the mass production of plug seedlings in cultivar ‘Dejima’ potato (Solanum tuberosum L.) the optimal apical cutting diameter for rooting and rapid multiplication of stem cuttings in hydroponics were determined. In addition, the best planting date was predicted to increase tuber yield of plug seedlings at fall cropping in Cheju-Do, Korea. Days to initial rooting decreased as the cutting diameter was reduced. Plant height, leaf number, root length and root weight per plant were favorable as the cutting diameter was small. The ideal cutting diameter was 1-2 mm in this experiment. In the hydroponic cultures, the Japanese standard (JS) nutrient solution was the most effective for multiplication of stem cuttings. It was able to propagate more than 20 times a month from a single mother plant. Viability of plants, which were derived from plug seedlings using stem cuttings, was excellent when transplanted to the field. The number of tubers and tuber yield in both of the plug seedlings and seed potato planting plots were high when planted on 25 August. The number and yield were reduced when planted on 15 August, 5 September and 15 September. The degree of decrease of tuber yield in the plug seedling planting plot however, was lower than that of seed potatoes when the planting date was late. In the case of small tubers (under 30 g), the number of tubers and tuber yield were evidently increased in the seed potato tuber planting plot; the yield of large tuber (over 80g) in the plug seedling planting plot was higher than that of the seed potato. The total tuber yield per plant in the plug seedling planting plot was less than that of the seed potato; therefore, in order to increase tuber yield it was necessary to increase field plant density.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.2
• /
• pp.183-192
• /
• 2004

The effect of eight varieties of grain and forage type whole crop rice (Oryza sativa L Japonica) each harvested at four stages of maturity were investigated for morphology and yield, proportion of botanical fractions, fermentatability and chemical composition in an $8{\times}4$ factorial experiment. All crops were sown in 1997 at Saitama Prefecture, Japan under identical condition and harvested on 10, 22, 34 and 45 days after flowering in 1998. Total DM yield of forage type varieties was similar to that of the highest yield of grain type varieties. However, while yield of forage type varieties was attributed to higher proportion of straw than head, the reverse was in the case of grain type varieties. Yield in line with the proportion of head increased (p<0.001), but in contrast proportion of straw decreased (p<0.001) with the increase in maturity. Silage fermentability of grain type varieties was better than forage type varieties. Fermentability improved with the increase (p<0.001) in maturity suggesting that the moisture content should be reduced to improve fermentation quality. Forage type varieties contained higher (p<0.001) ash, crude fat (EE), organic cell wall (OCW) and acid detergent fiber (ADF), but contained lower crude protein (CP), organic cell content (OCC), CP in OCC and nitrogen-free cell wall extract (NCWFE) than the grain type varieties. The ash, CP, EE, Oa (60% digestible OCW), Ob (40% digestible OCW), OCW, ADF and acid detergent lignin (ADL) decreased (p<0.001), but OCC and NCWFE increased (p<0.001) with the increase in maturity. It is concluded that stage of maturity not only increases yield and proportion of head, but also improved the fermentation quality and increases quality chemical composition (except CP) of whole crop rice. Forage type varieties may be as good as grain type varieties in terms of yield, but fermentation quality and chemical composition may not be as good as that of grain type varieties.

• Plant Resources
• /
• v.5 no.3
• /
• pp.196-201
• /
• 2002

This study was conducted to investigate the relationships between yearly variations of climatic elements and yearly variations of productivity in sesame. In addition, correlation coefficients among yield and yield components were estimated. The data of yield and yield components were investigated for 10 years from 1992 to 2001. The meteorological data gathered at the Yeosu Weather Station for the same period were used to find out the relationships between climatic elements and productivity. Yearly variation of the amount of precipitation in July and September were large with coefficients of variation(c.v.) of 64.59, 92.47%, respectively, but the variation of the average temperature in June and August were relative small. Yield and plant height greatly with c. v. of 26.24, 23.41 %, respectively, 1, 000 grain weights show more or less c.v. of 3.83% and length capsule setting show still less variation. Correlation coefficients between maximun temperature in period of cultivation(from June to September) and yield are positively significant at the level of 5.1 %, respectively. Correlation coefficients amount the plant height, length capsule setting, number of capsules per plant, weight of 1, 000 grains and seed yield were positively significant at the level of 1 %, respectively. Simple linear regression equations by the least square method are estimated for number of capsules per plant(Y$_1$) and the maximun temperature in August(X) as $Y_1$=10.1255+0.1725X, and for yield(Y$_2$) and the maximun temperature in August(X) as $Y_2$=21.6151 + 1.3724X.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.19-19
• /
• 2017

The indica ${\times}$ japonica rice (Oryza sativa L.) cultivars released in Japan since 1980 are high-yielding. However, occasionally in these cultivars their high yield potentials cannot be realized, particularly depending on climate conditions. The objectives of this study were to identify the reason for yield instability and the critical yield component factor causing lower grain yield in these high-yielding cultivars. Standard-yield japonica, high-yielding japonica-dominant, and indica-dominant cultivars were grown in western Japan. Rough grain yield (RY) in these high-yielding cultivars ranged from 450 to $980g\;m^{-2}$, and was positively correlated with potential grain yield (PRY). By fluctuations of solar radiation, RY changed with spikelet number (SNO), and SNO was correlated with cumulative radiation during the panicle formation period of 30 days before heading. Even if higher SNO was achieved under higher radiant conditions, RY was lower than PRY. The lower grain-filling in plants bearing higher SNO resulted from a lower filling percentage of spikelets (%F, RY/PRY), and %F was strongly correlated with spikelet fertility (%S) across all cultivars. %S was highly influenced by cumulative radiation per PRY during pollen development and establishment around heading. Inhibition of assimilation by leaf removal lowered %S. Conversely, stem thinning and removal of upper panicles around heading increased %S in spikelets of the lower part of the panicle in which sterility was higher. These results suggest that limitation of assimilate-supply due to low irradiance at the spikelet-formation and flowering stages restrains the potential of the high-yielding cultivars, depending on reduction of SNO and %S, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.7
• /
• pp.929-934
• /
• 2000

Optimum stand density of alfalfa (Medicago sativa L.) varies with locations and climates. Stand density is one of the factors that determines herbage yield, forage quality and persistence of alfalfa. As establishment costs increase, the question arises whether present population densities are optimum for obtaining maximum herbage yield and forage quality. The objectives of this study were: 1) to determine the optimum plant density for highest herbage yield and forage quality for the dehydrated alfalfa industry under Edmontons climatic conditions in Alberta, Canada; 2) to compare herbage yield and forage quality of the cultivars 'Algonquin' and 'Vernal' grown at a range of stand densities. Alfalfa seedlings of both cultivars were either transplanted at spacings of 6, 10, 15 and 25 cm or direct seeded at the 4.5 cm plant spacings, providing population densities of 494, 278, 100, 45 and $16plants/m^2$. The experimental design was a randomized complete block with a split-plot arrangement having three replicates; the main plots consisted of two alfalfa cultivars Algonquin and Vernal, and the sub-plots were the five population densities. The cultivar Vernal had significantly higher annual yield than did the cultivar Algonquin. There was no significant effect of plant density on herbage yield. There was no difference in crude protein (CP) between the two cultivars. At the first cut, there was a significant quadratic effect of plant density on CP content and the greatest CP occurred at the 100 plants/m2 density. Crude protein was not affected by plant density at the second cut. Acid detergent fiber (ADF) and neutral detergent fiber (NDF) were not affected by plant density. The cultivar Algonquin usually had a lower ADF and NDF than cultivar Vernal. In conclusion, high population densities ($278plants/m^2$ or more) of alfalfa did not improve herbage yield and forage quality compared with low plant population densities ($100plants/m^2$ or less) of alfalfa.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.115-131
• /
• 2008

The aim of this study is to analyze relationships between topography/geology which affects physically groundwater regime and groundwater yield properties in Pohang City using Geographic Information System (GIS). For the purpose, topographic factors such as ground elevation, ground elevation difference, ground slope, and ground regional slope, and hydrogeologic unit, and groundwater yield properties factors such as transmissivity, specific capacity, and well yield, were constructed to spatial data base. Then the relationships between topography, geology and groundwater yield properties were analyzed quantitatively using GIS overlay technique. As the results, ground-water yield of unconsolidated sediments and porous volcanic rocks is the highest among the hydrogeologic units of study area, and clastic sedimentary rock is the lowest. There are positive relationship between the elevation and elevation difference and the groundwater yield properties and negative relationship between the topographic slope and the groundwater yield properties.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.3
• /
• pp.298-305
• /
• 1984

The competitive relationship between orchardgrass (Dactylis glomerata L.) and ladino clover (Trifolium repens L.) was studied under aerial and soil partitions and N, P fertilizer combinations. Orchardgrass and ladino clover were grown in field with one of non competition, shoot competition only, root competition only, full competition and competition between same species. Under basal application of K fertilizer N and P were applied in treatment combinations of blank, N only (l5kg/10a), P only (l5kg/10a), and both NP at planting and each cutting. The forage yield in mixture was between yield of pure orchard grass stand and the 'expected yield', which was a mean of both pure stands. The forage yield in pure ladino was the lowest. During the experiment there was a progressive decline in clover yield either pure stand or mixture. Since orchardgrass was 'over-compensated' to low-yielding clover, the yield of mixture was more than non competition. Orchard grass was more competitive than ladino clover as seasons advanced. The aggressivity of orchardgrass was higher in root competition than in shoot competition comparing to clover. Nitrogen fertilizer increased orchardgrass yield, while phosphate did ladino clover yield and root weight of both species. But the additional effect of P to N was not significant in dry weight and LAI.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.1
• /
• pp.1-6
• /
• 1989

This field experiment was carried out to determine the effects of fertilizer application time in spring on the growth, crude protein(CP) content and dry matter(DM) yield of grasses for soiling. Application times of fertilizer were March 10, 20, 30, April 9 and 19, and control (non-fertilized) plot was involved. All fertilized plots were also treated with single- and compound fertilizer. The first harvesting date for soiling was May 12, and the regrowth soiling yield was investigated on June 9, 1988. In all fertilized plots, the growth, DM yield, CP, CP yield and regrowth yield of gasses were significantly increased compared with control, and the best grass growth, DM yield, CP, CP yield and N recovery were observed on March 30 and April 9 among all fertilized plots. And there were not significant differences between singleand compound fertilizer treatment in grass growth, DM yield and CP content. On March 30 and April 9 in this experiment, the accumulated temperature was 120 and 200^{\circ}C.$ and the subsoil temperature at 10 cm depth was 8 and 10^{\circ}C.$. Considering the average meteorological condition in Suwon area, the optimum application time of spring fertilizer for soiling may be recommended from April 3 to April 10.

• Plant Resources
• /
• v.6 no.2
• /
• pp.134-139
• /
• 2003

This study was conducted to investigate the relationships between yearly variations of meteorological elements and yearly variations of productivity in rice. In addition, correlation coefficients among yield and yield components were used to find out the relationships between meteorological elements and productivity. Yearly variation of the mean air temperature in May was large with coefficients of variation(C.V.) of 25.0%, but the variation of the duration of sunshine in May were relative small. No. of panicles per hill and 1,000 grains wt. of brown rice were great with C.V. of 21.1, 19.7%, respectively, brown rice yield show more or less C.V. of 5.5% and milled rice show still less variation. Correlation coefficients between temperatures in period of cultivation from May and yield were positive correlations. Correlation Coefficients between precipitation in period of cultivation from Sep. to Oct. and yield are positive correlations. Correlation coefficients amount the panicle length, no. of panicles, no. of spikelets, ratio of ripened grains, 1,000 grains wt. of brown rice, milled rice yield, brown rice yield and milled rice yield were positively significant at the level of 1 %, respectively.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.305-309
• /
• 2006

This paper presents and illustrates the application of a growth and yield model that supports both forest and mill side volume and value estimates. Traditional forest stand growth and yield models represent the forest landowner view of yield and economics. Predicted yields are estimates of what one would expect from a procurement cruise, and current stumpage prices are applied to investigate optimum management strategies. Optimum management regimes and rotation ages obtained from the forest side view are unlikely to be economically optimal when viewed from the mill side. The actual distribution of recoverable manufactured product and its value are highly dependent on mill technologies and configurations. Overcoming this limitation of growth and yield computer models necessitates the ability to predict and price the expected manufactured distribution of lumber, lineal meters of veneer, and tonnes of air dried pulp fiber yield. With these embedded models, users of the yield simulator can evaluate the economics of possible/feasible management regimes from both the forest and mill business sides. The simulator is a forest side model that has been modified to produce estimates of manufactured product yields by embedding models for 1) pulpwood chip size class distribution and pulp yield for any kappa number (Schultz and Matney, 2002), 2) a lumber yield and pricing model based on the Best Opening Face model developed by the USDA Forest Service Forest Products Laboratory (Lewis, 1985a and Lewis, 1985b), and 3) a lineal meter veneer model derived from peeler block tests. While the model is strictly applicable to planted loblolly pine (Pinus taeda L.) on cutover site-prepared land in the United States (US) Gulf South, the model and computer program are adaptable to any region and forest type.