• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.85-90
• /
• 2001

The microstructure and mechanical property of 0.19C-1.17Cr steel were investigated with cold drawing. This commercial steel has the microstructure that is consist of ferrite and pearlite. The tensile and yield strength are increased as the reduction ratio of cold drawing is increased. It was clear that mechanical properties could be improved by combination of the heat treatments and reduction ratio. Yield strength. tensile strength, and impact value were formulated as a constitutive function of cold drawing ratio, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제4권1호
• /
• pp.14-17
• /
• 1983

The effects of trialkylborane on the stereochemistry of ketone reduction with lithium borohydride were studied for the four representative ketones, namely 4-t-butylcyclohexanone, 2-methylcyclohexanone, norcamphor, and camphor. The presence of trialkylborane increased the yields of the less stable alcohols. For example, in the presence of tri-s-butylborane, 42 % yield of cis-4-t-butylcyclohexanol was observed whereas only 8 % yield with lithium borohydride alone in the reduction of 4-t-butylcyclohexanone. The in situ formation of lithium trialkylborohydride, by the hydride transfer from lithium trialkoxyborohydride to trialkylborane, was demonstrated as a possible mechanism for the catalytic effect of trialkylborane.

• 한국농공학회논문집
• /
• 제59권1호
• /
• pp.71-79
• /
• 2017

Climate change phenomenon is posing a serious threat to sustainable corn production in Ghana. This study investigated the impacts of climate change on the rain-fed corn yield in the Dangme East district, Ghana by using Aquacrop model with a daily weather data set of 22-year from 1992 to 2013. Analysis of the weather data showed that the area is facing a warming trend as the numbers of years hotter and drier than the normal seemed to be increasing. Aquacrop model was assessed using the limited observed data to verify model's sufficiency, and showed credible results of $R^2$ and Nash-Sutcliffe efficiency (NSE). In order to simulate the corn yield response to climate variability four climate change scenarios were designed by varying long-term average temperature in the range of ${\pm}1^{\circ}C{\sim}{\pm}3^{\circ}C$ and average annual rainfall to ${\pm}5%{\sim}{\pm}30%$, respectively. Generally, the corn yield was negatively correlated to temperature rise and rainfall reduction. Rainfall variations showed more prominent impacts on the corn yield than that of temperature variations. The reduction in average rainfall would instantly limit the crop growth rate and the corn yield irrespective of the temperature variations.

• 한국작물학회지
• /
• 제28권3호
• /
• pp.351-357
• /
• 1983

예상요인이 대두에 미치는 영향을 알기 위하여 1976년부터 1981년까지의 강우량, 강수일수, 온도등의 기상요인과 동 기간에 재배한 봉의 품종의 수량을 비롯한 중요 농경형질간의 관계를 조사하여 얻어진 경과를 요약하면 다음과 같다. 1. 중요형질의 년차에 따른 변이계수는 등숙율이 37.9%, 수량 및 주당협수는 30%, 100립중은 5.5%였다. 2. 대두 재배기간 동안의 강우량, 강수일수, 온도 등을 월별로 보면 7, 8월의 기상요인이 생육에 크게 영향을 미치며 그 중 온도조건이 가장 문제가 되었다. 3. 7월의 최고, 최저 및 평균온도와 수량 및 립중, 8월의 최고온도와 수량 및 립중, 8월의 최고, 최저 및 평균온도와 등숙율과는 부의 상관이 있었다. 4. 예상요인과 수량과의 관계를 회귀직선식으로 나타내면 7월의 평균온도와 수량은 y=-42.46X ＋1200.86, 8월의 최고온도와 수량은 y=-37.95X ＋1210.42였다. 5. 중부지방의 맥전작재배지역에서는 개화기에 해당하는 7월 21일부터 7월 31일까지의 고온이 특히 대두의 수량감소를 가져온다.

• 한국수자원학회논문집
• /
• 제44권11호
• /
• pp.863-873
• /
• 2011

전세계적으로 토사유출은 심각한 문제로 알려져 있다. 환경관리자, 농부 및 다른 토지소유자들을 위해 다양한 모델링 테크닉이 개발되어왔고, 토양유실 저감을 위해 다양한 site-specific 최적관리기법의 효율을 산정하여 활용하였다. 물리적기반인 WEPP 모형은 시 공간적으로 작은 유역과 필지에서 발생하는 토양유실을 산정할 수 있다. 그러므로 본 연구에서는 WEPP watershed version을 이용하여 강원도 홍천군 자운리에 위치한 연구지역에 빗물 우회수로와 식생수로를 적용하였다. 우회수로 적용시 유출량과 토사유출량은 각각5.8%, 29.6% 저감되었으며, 식생수로 적용시 각각 9.8%, 14.5% 저감되었다. 식생수로와 우회수로를 혼합한 식생우회수로는 유출량과 토사유출량이 각각 11.8%, 40.4% 저감되었다. 본 연구의 결과와 같이 WEPP 모형은 유출량과 토사유출량 저감효과를 산정하고, site-specific 토사유출저감 최적관리기법 수립에 유용할 것으로 판단된다.

• 지질공학
• /
• 제27권4호
• /
• pp.439-449
• /
• 2017

경기도 안성천 유역에 설치된 강변여과수 시설의 취수량 감소 원인에 대하여 4개 수평정(1, 4, 6, 7번) 주변의 대수층 매질 특성, 수리전도도의 분포 등을 토대로 검토하였다. 시험 양수 기간 동안 1번 수평정은 $12.4m^3/d/d$, 4번은 $2.3m^3/d/d$, 6번은 $24.4m^3/d/d$, 7번은 $187.3m^3/d/d$의 경향으로 7번 수평정의 취수량 감소가 뚜렷하였다. 7번 수평정 주변은 국지적으로 수리전도도가 매우 낮은 구간이 존재하며, 전체적으로 균등 계수가 크고 수평 깊이별로 균등계수의 차이가 심하여 세립분의 이동에 의한 공극 막힘이 발생한 것으로 평가된다. 또한, 철 이온($Fe^{2+}$) 농도가 높아 양수 및 주입시 철산화물이 형성되면서 clogging을 야기하는 것으로 보인다. 향후 장기 양수 과정에서 대수층의 물리특성 및 수질 특성 변화를 분석한다면 취수량 감소에 대한 정확한 원인 규명이 가능할 것이다.

• 한국초지조사료학회지
• /
• 제11권2호
• /
• pp.97-101
• /
• 1991

This experiment was carried out to determine the effect of pure mineral nitrogen fertilization on dry matter yield and the amounts of advisable mineral nitrogen on grassland according to its age at the "Federal Institue for Agriculture in the Alps" in Austria. The results obtained were as follows: 1. With only PK-fertilizing average dry matter yields per year were progressively declined during the period of the studies. Compared with the relatively younger grassland(1st-5th year) the DM-yields were decreased by 35% in older grassland (11th-final year). 2. Due to the less reduction of DM-yields by mineral nitrogen application according to the age of grassland. With N-fertilizing the reduction of DM-yields in relatively older grassland was less than that of younger grassland by 11-21%. 3. At 4-and 5-cut systems the nitrogen amounts for the highest marginal yield(the "most efficient" Ndressing rate) per ha and year were distinctly declined in the relatively older grassland. 4. Required efficiencies of mineral nitrogen were not influenced by the age of grassland.he age of grassland.

• Journal of Microbiology and Biotechnology
• /
• 제17권7호
• /
• pp.1183-1190
• /
• 2007

A metabolic uncoupler, 3,3',4',5-tetrachlorosalicylanilide (TCS), was used to reduce excess sludge production in biological wastewater treatment processes. Batch experiments confirmed that 0.4 mg/l of TCS reduced the aerobic growth yield of activated sludge by over 60%. However, the growth yield remained virtually constant even at the increased concentrations of TCS when cultivations were carried out under the anoxic condition. Reduction of sludge production yield was confirmed in a laboratory-scale anoxic-oxic process operated for 6 months. However, it was found that ammonia oxidation efficiency was reduced by as much as 77% in the presence of 0.8 mg/l of TCS in the batch culture. Similar results were also obtained through batch inhibition tests with activated sludges and by bioluminescence assays using a recombinant Nitrosomonas europaea (pMJ217). Because of this inhibitory effect of TCS on nitrification, the TCS-fed continuous system failed to remove ammonia in the influent. When TCS feeding was stopped, the nitrification yield of the process was resumed. Therefore, it seems to be necessary to assess the nitrogen content of wastewater if TCS is used for reducing sludge generation.

• Structural Engineering and Mechanics
• /
• 제17권2호
• /
• pp.187-201
• /
• 2004

A shaking table test on a three-story one-bay steel frame model with metallic yield dampers and their parallel connection with oil dampers is carried out to study the dynamic characteristics and seismic performance of the energy dissipation system. It is found from the test that the combined energy dissipation system has favorable reducing vibration effects on structural displacement, and the structural peak acceleration can not evidently be reduced under small intensity seismic excitations, but in most cases the vibration reduction effect is very good under large intensity seismic excitations. Test results also show that stiffness of the energy dissipation devices should match their damping. Dynamic analysis method and mechanics models of these two dampers are proposed. In the analysis method, the force-displacement relationship of the metallic yield damper is represented by an elastic perfectly plastic model, and the behavior of the oil damper is simulated by a velocity and displacement relative model in which the contributions of the oil damper to the damping force and stiffness of the system are considered. Validity of the analytical model and the method is verified through comparison between the results of the shaking table test and numerical analysis.

• 산업공학
• /
• 제20권1호
• /
• pp.87-93
• /
• 2007

Burn-in is an engineering method for screening out products containing reliability defects which would cause early failures in field operation. Previously, various burn-in models have been proposed mainly focused on the trade-off of shop repair cost and warranty cost ignoring manufacturing yield. From the view point of a manufacturer, however, burn-in decreases warranty cost at the expense of yield reduction. In this paper, we provide a general model quantifying a trade-off between product yield and reliability, in which any defect distribution from previous yield models can be used. A profit function is expressed in burn-in environments for determining an optimal burn-in time. Finally, the method is illustrated with gate oxide failures which is an important reliability concerns for VLSI CMOS circuits.