• Journal of Food Hygiene and Safety
• /
• v.5 no.1
• /
• pp.1-6
• /
• 1990

Extraction properties were investigated on ginseng leaf tea as functions of the current ethylene oxide fumigation and gamma irradiation at 2.5 to 10 kGy. In the extraction of tea constituents at boiling conditions, water soluble matters were the highest (83% yield for 5 min) in the time dependence, followed by tannin (82%), sugar (73%) and saponin (66%). No significant difference was observed in the extraction yield between the 5 kGy-irradiated and control samples, whereas both EO fumigation and 10 kGy irradiation reduced the extraction time of soluble matter and tannin, leading to the decrease in Hunter L value of tea extracts.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.1 no.1
• /
• pp.2-9
• /
• 1978

A review of factors influencing grass and clover establishment, survival and yield at oversowing was made from the experimental results of home and abroad. The following conclusions are considered: (1) The existing vegetation present at oversowing appeared to be the most critical factor reducing establishment and survival of grass. Therefore, it is essential to check competition from the native vegetation before oversowing. (2) Although lime had comparatively little effect on yield of grassland, the general effect of lime should be more emphasized under our acid soil conditions to promote the availability of all the essential elements and the growth of microorganisms, and to reduce the toxic effects of nutrients. One to two tons of lime per ha at oversowing would be useful. (3) Phosphorus is one of the nutrients most generally deficient in grassland soils of Korea, consequently, this nutrients applied at oversowing is very effective. Application as much as 200kg of phosphorus per ha would be essential. (4) The effect of nitrogen on the establishment and survival of grass depends on the amount and density of the herbage present. The use of nitrogen in dense herbage adversely affected grass establishment and survival, possible because the fertilizer stimulated the growth of the eisting herbage. Around 40kg of nitrogen per ha may be enough at oversowing (5) Potassium is not as universally deficient in soils of native grassland as phosphorus. Therefore, it cannot be over-emphasized at oversowing. Studies determinig the optimum amount of potassium at of oersowing are needed.

• Journal of Pharmacopuncture
• /
• v.15 no.2
• /
• pp.24-30
• /
• 2012

This study compared Ojeok-san (Wuji-san in Chinese) decoctions produced using different extraction methods for variable times. Decoctions were extracted in pressurized or non-pressurized conditions for 60, 120, and 180 mins. We investigated the Ojeok-san extract yield, the total soluble solid content, the hydrogen ion concentration (pH), and the reference compound content. The extract yield and the total soluble solid content were higher in decoctions produced by non-pressurized extraction; both were proportional to the extraction time. The pH tended to decrease as the extraction time was increased in decoctions produced using both methods. After 60 and 180 mins, the levels of albiflorin, paeoniflorin, nodakenin, naringin, and neohesperidin were significantly higher in decoctions extracted using the non-pressurized method compared with those extracted using the pressurized method. After 120 mins, only cinnamaldehyde was extracted in a greater amount in pressurized decoctions compared with non-pressurized decoctions. The levels of paeoniflorin, ferulic acid, nodakenin, naringin, hesperidin, neohesperidin, and glycyrrhizin increased with time in non-pressurized decoctions. This study showed that the use of pressurized and non-pressurized extraction methods for different times affected the composition of Ojeoksan (Wuji-san) decoctions.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.662-668
• /
• 1994

The cinnamoyl esters of polyresorcinol-formaldehyde glycidyl ether (RGEFC) with photosensitive functional group were prepared. Photosensitivity of RGEFC were investigated by the change of solubility before and after exposure to light. Various samples coated on glass plates were exposed to light under various conditions and steeped in the same solvent as used for coating, and then the yield of residual film was calculated. The yield of the residual film which was closely related to the sensitivity of the film, was affected by the degree of polymerization of the backbone resin, sensitizers and their concentration. The sensitivity was depended upon the degree of polymerization. Most effective sensititizer for RGEFC among the sensitizers used was 2,6-dichloro-4-nitroaniline.

• Journal of Life Science
• /
• v.24 no.1
• /
• pp.81-85
• /
• 2014

Pseudomonas sp. BCNU 106 isolated from industrial wastewater was able to produce indigo from indole by utilizing various organic solvents. BCNU 106 produced indigo effectively when grown in the presence of a large volume of p-xylene, propylbenzene, and mesitylene and a high level of indole. The present study demonstrated that the maximal yield was achieved with 20% (v/w) p-xylene and 4 g/l indole. Under these conditions, the indigo yield and the transformation efficiency of indole were 315.5 mg/l and 97%, respectively. The results suggest that Pseudomonas sp. BCNU 106 might be a potential candidate for industrially important indigo production.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.793-796
• /
• 2004

Process Parameters were studied in synthesis of LiCoO$_2$ Powder by ultrasonic spray Pyrolysis. Concentration of the mixed solution influenced the size, shape, and yield of the synthesized powder. The yield was affected primarily by the height of the solution, and then by the flow rate of a carrier gas. The temperature of the reactor governed the crystallinity and morphology of the powder. LiCoO$_2$ powders were synthesized as a layered high temperature phase above 800$^{\circ}C$. The synthesized powders were sphere and secondary Particles consisted of primary particles of 55-70 nm. The secondary Particles became bigger from 0.28 to 1.43 $\mu\textrm{m}$ as the concentration of the solution was increased from 0.05 to 2.0 M. The 2.0 M solution provided the highest production rate.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.2
• /
• pp.131-140
• /
• 2007

Phospho-gypsum a primary waste by-product in phosphate fertilizer manufacturing industry and a potential source of electron acceptors, such as mainly of sulfate and a trace amount of iron and manganese oxides, was selected as soil amendment for reducing methane $(CH_4)$ emissions during rice cultivation. The selected amendment was added into potted soils at the rate of 0, 2, 10, and 20 Mg $ha^{-1}$ before rice transplanting. $CH_4$ flux from the potted soil with rice plant was measured along with soil Eh and floodwater pH during the rice cultivation period. $CH_4$ emission rates measured by closed chamber method decreased with increasing levels of phospho-gypsum application, but rice yield markedly increased up to 10 Mg $ha^{-1}$ of the amendment. At this amendment level, total $CH_4$ emissions were reduced by 24% along with 15% rice grain yield increment over the control. The decrease in total $CH_4$ emission may be attributed due to shifting of electron flow from methanogenesis to sulfate reduction under anaerobic soil conditions.

• Macromolecular Research
• /
• v.11 no.2
• /
• pp.80-86
• /
• 2003

The polymerization of a cyclopolymerizable disubstituted dipropargyl ether, his(3-trimethylsilyl-2-propynyl)ether (BTPE), was attempted by various transition metal catalysts. The yield for the polymerization of BTPE was generally low, which is possibly due to the steric hindrance of bulky substituents. In general, the catalytic activities of Mo-based catalysts were found to be greater than those of W-based catalysts. The highest yield was obtained when the MoCl$_{5}$,-EtAlCl$_2$(1:2) catalyst system was used. The copolymerization of BTPE and diethyl dipropargylmalonate yielded a random copolymer with conjugated polymer backbone. However the polymers were partially desilylated, depending on the reaction conditions. The thermal and morphological properties of the resulting polymers were also discussed.d.

• Archives of Pharmacal Research
• /
• v.10 no.3
• /
• pp.158-164
• /
• 1987

To obtain a new strain of Ganoderma lucidum by protoplast fusion technique, its protoplast formation and regeneration were studied. Several factors affecting the protoplast formation and regeneration were investigated to find their optimum conditions. The mycelium was grown for four days on the cellophane membrane placed on G. Incidum complete medium (GCM). When various commercial lytic enzymes were examined for protoplast isolation, the combination of Novozym 234 and $\beta$glucuronidase was found to be effective. An osmotic stabilizer, 0.6 M sucrose in 20 mM phosphate buffer pH 5.8, gave the highest yield of protoplasts. Three-hour incubation in shaking incubator was most suitable for releasing protoplasts. To increase the protoplast yield, pretreatment with 2-mercaptoethanol was carried out. The regeneration frequency in GCM containing 0.6M MgSO$_4$ 7$H_2O$ was shown to be 0.66%.

• Journal of Ginseng Research
• /
• v.34 no.4
• /
• pp.321-326
• /
• 2010

Enzymatic treatment conditions for red ginseng residue (RGR) were investigated to apply RGR as a microbial medium. Polysaccharide hydrolyase and protease were screened to obtain high solid and carbohydrate yields, and a good degree of carbohydrate hydrolysis. The optimal dosage and reaction time for Viscozyme, the chosen polysaccharide hydrolyase, were found to be 1.0% (w/w) and 3 h, respectively. Of the tested proteases, Flavourzyme, whose optimal dosage was 0.5% (w/w), was selected. Co-treatment with the optimal dosages of Flavourzyme and Viscozyme increased solid yield, carbohydrate yield, and degree of carbohydrate hydrolysis by 76%, 65%, and 1,865%, respectively, over levels in non-treated RGR. The culture characteristics of Leuconostoc mesenteroides strain KACC 91459P grown in enzymatically hydrolyzed red ginseng residue (ERGR) and RGR suspensions were compared. After cultivation for 6 h, the viable cell counts of both cell suspensions rapidly increased to $1.3{\times}10^9$ colony-forming units (CFU)/g. Moreover, while the viable cell population drastically decreased to $2.4{\times}10^6\;CFU/g$ for cells grown in RGR medium, it was maintained in cells fermented in ERGR medium for 24 h.