• Korean Journal of Food Science and Technology
• /
• v.13 no.2
• /
• pp.160-164
• /
• 1981

A study was conducted for process conditions for maximum yield of crude soy lecithins and its quality improvement by solvent extraction. Results indicate that maximum yield of the crude lecithins was obtained by hydration with 3% water at degumming temperature $75^{\circ}C$. On the other hand, water level used for hydration was found to affect the recovery yield of the lecithins more profoundly than the degumming temperature. It was also found that extractions with acetone and 2-propanol increased the phosphatidyl choline content from 19.7% to 28.3% and 58%, respectively.

• Journal of Surface Science and Engineering
• /
• v.16 no.1
• /
• pp.3-9
• /
• 1983

The change of the hardness and yield strength depending upon the electrolysis conditions was investigated for Watts and bright nickel electrodeposits. The hardness of Watts nickel electrodeposits decreased with increasing current density in the range of 1-15A/Am2, while it increased with increasing bath temperature. The hardness of bright nickel deposits increased noticebly in comparison with that of Watts nickel electro-deposits. The hardness and the yield strength of the bright nickel electrodeposits increased considerably with decreasing current density and the highest value was obtained at the lowest current density (1A/dm2), while they decreased noticebly at the bath temperature of 80$^{\circ}C$ in comparison with that of 40-60$^{\circ}C$. The change of the hardness and the yield strength of bright nickel electrodeposits depending upon the electrolysis conditions could be mainly attributed to the variation of organic additives codeposited in the electrodeposits. The recrystallizatioin temperature(50% softening temperature) of the Wattss and the bright nickel electro-deposits was 520-280$^{\circ}C$ and 350-410$^{\circ}C$ respectively and then the recystallization temperature of bright nickel deposits was lower than that of the Watts nickel electrodeposits.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.5 s.113
• /
• pp.41-49
• /
• 2005

This paper deals the effect of anthraquinone (AQ) on the contribution of sulphidity in kraft pulping of sapwood. The pulping conditions namely- active alkali concentration, pulpingtime, temperature and liquor ratio were varied in low ($15\%$) and high ($30\%$) sulphidity. $0.1\%$ AQ was added in the low and high sulphidity pulping with varying active alkali concentration and cooking time. At optimum conditions, low sulphidity kraft process produced about $44\%$ pulp yield with kappa number of about 23. But in high sulphidity kraft process kappa number was reduced to about 20 at the same yield. An addition of AQ reduced alkali requirement by $2\%$ on oven dried raw material and cooking time by 1 hour to produce pulp yield of about $44\%$ at kappa number 20. AQ is more effective in low sulphidity pulping than the high sulphidity pulping. The breaking length of kraft-AQ pulp was slightly higher than that of kraft pulp.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.354-361
• /
• 2019

Renewable energy from biomass and biodegradable wastes can significantly supplement the global energy demand if properly harnessed. Pyrolysis is the most profound modern technique that has proved effective and efficient in the energy conversion of biomass to yield various products like bio-oil, biochar, and syngas. This study focuses on optimization of slow pyrolysis of banana peels waste to yield banana peels vinegar, tar and biochar as bio-infrastructure products. Response surface methodology using central composite design was used to determine the optimum conditions for the banana wastes using a batch reactor pyrolysis system. Three factors namely heating temperature ($350-550^{\circ}C$), sample mass (200-800 g) and residence time (45-90 min) were varied with a total of 20 individual experiments. The optimal conditions for wood vinegar yield (48.01%) were $362.6^{\circ}C$, 989.9 g and 104.2 min for peels and biochar yield (30.10%) were $585.9^{\circ}C$, 989.9 g and 104.2 min. The slow pyrolysis showed significant energy conversion efficiencies of about 90% at p-value ${\leq}0.05$. These research findings are of primary importance to Uganda considering the abundant banana wastes amounting to 17.5 million tonnes generated annually, thus using them as pyrolysis feedstock can boost the country's energy status.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.14-14
• /
• 2022

Greenhouse gas emissions are one of the critical factors that drive change in rice cropping systems. Within this changing system, less water irrigation and chemical fertilizer are seriously considered, as well combining precision farming technologies with irrigation control. Water and phosphorus (P) fertilizer are two of the most critical inputs in rice cultivation. Due to the lack of water availability in the system, P fertilizer is not available, especially in acidic soil conditions. Moreover, the various types of abiotic stresses, such as drought, high temperature, salinity, submergence, and limited fertilizer result in significant yield loss in the system. Even in the late stage of growth, the waves caused by diseases and insects make the field more unfruitful. Therefore, agronomists and breeders need to identify the secondary phenotypes to estimate the yield loss of when stress appears. The prediction will be clearer if we have a set of markers tagging the causal variation and the associated precise phenotype indices. Although there have been various studies for abiotic stress tolerance, we still lack functional molecular markers and phenotype indices. This is due to the underlying challenges caused by environmental factors in highly unpredictable regional and yearly environmental conditions in the field system. Pupl (phosphorus uptake 1) is still known as the first QTL associated with phosphorus uptake and have been validated in different field crops. Interestingly, some pyramiding lines of Pupl and other QTLs for other stress tolerances showed preferable phenotypes in the yield. Precise physiological studies with the help of genomics are on-going and some results will be discussed.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.354-354
• /
• 2017

Rice grain yield is determined by crop dry matter production that is sensitive to temperature. Our objective was to determine whether the difference in temperature between years had an impact on the relationship between yield components and grain yield. Field experiments were conducted under machine transplanting cultivation by using yield data of two japonica rice varieties, Odaebyeo (early maturing) and Nampyeong (mid-late maturing), in 2013 to 2016 in Suwon, Korea. Plant height, dry weight, and yield components were examined by analysis of variance, correlation. The milled rice yield of the two varieties were the highest in 2016, however the lowest yields were observed in the different years. In 2016, Odaebyeo produced $0.96t\;ha^{-1}$ greater milled rice yield than in 2015, and Nampyeong produced $1.11t\;ha^{-1}$ greater yield than in 2013. The correlation analysis indicated that spikelet per panicle (R = 0.53) was associated with grain yield of Odaebyeo. In Nampyeong, biomass at heading date (R = 0.74), 1000-grain weight (R = 0.71), spikelet per panicle (R = 0.58), and panicle number per $m^2$ were associated with grain yield. Sink size (spikelet number per $m^2$) of the two varieties responded to accumulative temperature from transplanting to panicle initiation stage. In this experiment, optimal accumulative temperature before panicle initiation has effect on increased spikelet number and/or number of panicle that were mainly responsible for yield difference. Rice production research to increase grain yield should consider all yield components, but increased emphasis on biomass production before heading is also necessary as well as grain ripening conditions.

• Environmental Engineering Research
• /
• v.15 no.3
• /
• pp.129-134
• /
• 2010

The optimization of experimental parameters, such as catalyst type, catalyst concentration, molar ratio of alcohol to oil and reaction temperature, on the transesterification for the production of rapeseed methyl ester has been studied. The Taguchi approach (Taguchi method) was adopted as the experimental design methodology, which was adequate for understanding the effects of the control parameters and to optimize the experimental conditions from a limited number of experiments. The optimal experimental conditions obtained from this study were potassium hydroxide as the catalyst, at a concentration of 1.5 wt %, and a reaction temperature of $60^{\circ}C$. According to Taguchi method, the catalyst concentration played the most important role in the yield of rapeseed methyl ester. Finally, the yield of rapeseed methyl ester was improved to 96.7% with the by optimal conditions of the control parameters which were obtained by Taguchi method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.466-470
• /
• 2001

Response surface methodology was used for monitoring extraction conditions, based on quality properties of old pumpkin extracts. Hunter's color L value of extracts was maximized at 101℃, 2.6 hr and decreased gradually after maximum point. The polynomial equation for Hunter's color L value showed 10% of significance level and 0.8799 of R². Hunter's color a value was minimized at 117℃, 3.9 hr and R² of polynomial equation was 0.9852 within 1% significance level. Hunter's color b value and ΔE value increased as the extracting temperature and time increased. Extraction yield of old pumpkin was maximized at 110℃, 4 hr and increased in proportional to the extracting temperature and time, but decreased after 113℃ and 2 hr. Viscosity of pumpkin extracts were maximized at 120℃, nearly 3 hr. R² of polynomial equations for yield, viscosity and sugar content were 0.9532, 0.9812 and 0.8869, respectively. Optimum ranges of extraction conditions for quality properties of old pumpkin were 102∼109℃, 2.5∼3.5 hr, respectively. Predicted values at the optimum extraction condition agreed with experimental values.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.10
• /
• pp.1400-1404
• /
• 2001

$Holstein\;{\times}\;indigenous$ multiparous dairy cows were offered diets with increasing roughage neutral detergent fiber (NDF) contents to determine the effects on intake, milk yield and compositions. Roughage NDF contents were 15, 18, 21 and 24% dry matter (DM), and concentrate NDF content was 10% DM. Experimental treatments were isonitrogenous and isocaloric diets. Maximum and minimum temperature humidity index during the experimental period were 85.9 and 76, respectively. Intakes of DM, crude protein and net energy, 4% fat corrected milk, milk protein and average daily gain decreased with increasing roughage NDF contents (p<0.05). Intakes of ether extract (p<0.01) and dietary NDF (p>0.05) and milk fat (p<0.01) increased with increasing roughage NDF contents. The results support the conclusion that higher DM intake, optimal milk yield and compositions can be maintained with lower roughage NDF diets for dairy cows under tropical conditions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.4
• /
• pp.377-380
• /
• 1992

To produce economically important acid with pear juice, an acetic acid bacterium was selected from many isolated acetic acid bacteria. The alcohoic fermentation was conducted by inoculating pear juice with Saccharomyces cerevisiae ATCC 4124, and then the pear vinegar was prepared by batch cultivation in flaskes with the isolated Acetobacter sp. The optimum conditions for high yield of acetic acid were studied experimentally in the batch shake flask . For seed purposes the Acetobactor sp. was cultivated for 2 -days and transferred to the acid production medium . Optimum alcohol concentration, initial acidity and temperature for the acid production were 8.0% , 2.0% and 28$^{\circ}C$, respectively. Under the same conditions, the addition of yeast extract (1%) was observed to produce relatively high yield of acetic acid.