• Title/Summary/Keyword: yield conditions

Search Result 3,132, Processing Time 0.033 seconds

Using Chlorophyll(SPAD) Meter Reading and Shoot Fresh Weight for Recommending Nitrogen Topdressing Rate at Panicle Initiation Stage of Rice

  • Nguyen, Hung The;Nguyen, Lan The;Yan, Yong-Feng;Lee, Kyu-Jong;Lee, Byun-Woo
    • Journal of Crop Science and Biotechnology
    • /
    • v.10 no.1
    • /
    • pp.33-38
    • /
    • 2007
  • Nitrogen management at the panicle initiation stage(PI) should be fine-tuned for securing a concurrent high yield and high quality rice production. For calibration and testing of the recommendation models of N topdressing rates at PI for target grain yield and protein content of rice, three split-split-plot design experiments including five rice cultivars and various N rates were conducted at the experimental farm of Seoul National University, Korea from 2003 to 2005. Data from the first two years of experiments were used to calibrate models to predict grain yield and milled-rice protein content using shoot fresh weight(FW), chlorophyll meter value(SPAD), and the N topdressing rate(Npi) at PI by stepwise multiple regression. The calibrated models explained 85 and 87% of the variation in grain yield and protein content, respectively. The calibrated models were used to recommend Npi for the target protein content of 6.8%, with FW and SPAD measured for each plot in 2005. The recommended N rate treatment was characterized by an average protein content of 6.74%(similar to the target protein content), reduced the coefficient of variation in protein content to 2.5%(compared to 4.6% of the fixed rate treatment), and increased grain yield. In the recommended N rate treatments for the target protein content of 6.8%, grain yield was highly dependent on FW and SPAD at PI. In conclusion, the models for N topdressing rate recommendation at PI were successful under present experimental conditions. However, additional testing under more variable environmental conditions should be performed before universal application of such models.

  • PDF

Stress Intensity Factors for a Crack in a Nonlinear Electrostrictive Material (비선형 전왜재료 내부의 균열에 대한 응력 확대계수)

  • Beom, Hyeon-Gyu;Jeong, Eun-Do
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.18 no.2
    • /
    • pp.186-191
    • /
    • 2001
  • A crack with electrically impermeable surfaces in an electrostrictive material subjected to uniform electric loading is analysed. The effect of electric yielding on stress intensity factor is investigated by using a small scale yielding model and a strip yield zone model. Complete forms of electric fields and elastic fields are derived by using complex function theory. The electrical yield zone shapes for two models are different each other. The two models, however, predict similar yield zone sizes under the small scale yielding conditions. It is found that the influence of electric yielding on the stress intensity factor is insensitive to the modeling of the electrical yield zone shape.

  • PDF

Boundary Line Analysis of Rice Yield Responses to Meteorological Conditions for Yield Prediction 1 . Boundary Line Analysis and Construction of Yield Prediction Model (최대경계선을 이용한 벼 수량의 기상반응분석과 수량 예측 1. 최대경계선 분석과 수량예측모형 구축)

  • 김창국;이변우;한원식
    • Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
    • /
    • 2001.06a
    • /
    • pp.109-112
    • /
    • 2001
  • 농작물의 생육 및 작황은 내적으로는 품종 자체의 고유 특성과 외적으로는 재배기술, 토양환경, 기상환경 등에 크게 영향을 받는다. 이중 온도, 일조시수 등의 기상조건은 생육과 수량 형성에 직접적인 영향을 미치게 되며 작물의 고유특성인 출수기, 수량구성요소 등도 기상환경에 따라 변이를 나타낸다.(중략)

  • PDF

Boundary Line Analysis of Rice Yield Responses to Meteorological Conditions for Yield Prediction II. Verification of Yield Prediction Model (최대경계선을 이용한 벼 수량의 기상반응분석과 수량 예측 II. 수량예측모형 검증)

  • 김창국;이변우;한원식
    • Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
    • /
    • 2001.06a
    • /
    • pp.113-116
    • /
    • 2001
  • 90년대 이후 다양한 첨단전산기술들이 작물모형분야에도 이용되기 시작하였는데 농업생태계 평가를 위한 국지단위 모의모형의 활용, 인공위성 등을 이용한 원격계측정보의 활용, GIS기술 등은 농업분야에서 널리 활용되고 있는 첨단 신기술의 대표적인 사례가 되고 있다. 이러한 신기술들은 농업기상정보를 생산하는 데에 이용될 뿐만 아니라 가장 중요한 환경요소로서 농업기상정보를 필요로 한다(Munakata, 1976).(중략)

  • PDF

Continuous Production of Citric Acid from Dairy Wastewater Using Immobilized Aspergillus niger ATCC 9142

  • Kim, Se-Kwon;Park, Pyo-Jam;Byun, Hee-Guk
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • v.7 no.2
    • /
    • pp.89-94
    • /
    • 2002
  • The continuous production of citric acid from dairy wastewater was investigated using calcium-alginate immobilized Asrergillus niger ATCC 9142. The citric acid productivity and yield were strongly affected by the culture conditions. The optimal pH, temperature, and dilution rate were 3.0, 30$^{\circ}C$, and 0.025 h$\^$-1/, respectively. Under optimal culture conditions, the maximum productivity, concentration, and yield of citric acid produced by the calcium-alginate immobilized Aspergillus niger were 160 mg L$\^$-1/ h$\^$-1/, 4.5 g/L, and 70.3%, respectively, The culture was continuously perfored for 20 days without any apparent loss in citric acid productivity. Conversely, under the same conditions with a batch shake-flask culture, the maximum productivity, citric acid concentration, and yield were only 63.3 mg L$\^$-1/h$\^$-1/, 4.7 g/L and 51.4%, respectively, Therefore, the results suggest that the bioreactor used in this study could be potentially used for continuous citric acid production from dairy wastewater by applying calcium-alginate immobilized Aspergillus niger.

Preparation of Mook with Sea Mustard and Sea Tangle 1. The Optimum Condition of Sea Mustard and Sea Tangle Mooks (미역과 다시마를 주원료로 한 묵 제조1. 미역, 다시마묵의 최적 조건과 그 물성에 관하여)

  • 정용현;김건배;최선남;강영주
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.23 no.1
    • /
    • pp.156-163
    • /
    • 1994
  • To investigate the optimum conditions of seaweed Mooks prepared with sea mustard (Indaria pinnatifida) and sea tangel(Laminaria japonica), pH, viscosity , yield and jelly strength were studied on the sol and /or gel (Mook ) made from homogenized seaweeds. Solubilization conditions of homogenized seaweeds were heating at $65^{\circ}C$ for one hour after mixing homogenized seaweed with 1 % $K_2$HPO$_4$ by 1 ; 1 (v/v) . Gelation conditions were 24 hrs by natural permeation of Ca++ into the sol in three times (v/v) of 1 % CaCl$_2$ solution to solubilized seaweed passed through 60 mesh of sieve. There are generally no relationship between viscosity of solubilized seaweed and jelly strength of Mook produced by gelation of the sol in CaCl$_2$ solution . Jelly strength of sea mustard Mook was more than 500g/$\textrm{cm}^2$ , yield was 87.5% of the solubilized and filtrated seaweed . Jelly strength and specific gravity of sea tangle Mook were higher those of sea mustard Mook, while its yield was lower than that of sea mustard Mook.

  • PDF

Batch and dynamic study of lactic acid extraction using emulsion liquid membrane

  • Berrama, Tarek;Pareau, Dominique;Durand, Gerard
    • Membrane and Water Treatment
    • /
    • v.6 no.4
    • /
    • pp.277-292
    • /
    • 2015
  • The extraction of lactic acid by an emulsion liquid membrane (ELM), in batch and continuous mode, has been reported. On the basis of preliminary experiments, the optimum composition of the organic phase (membrane) is determined. When the SPan 80 is used as surfactant, the emulsion breakage exceeds 50%, but only 10% is obtained when the ECA4360 is used. The effects of surfactant, carrier and solute concentrations, phase volume ratio, and stirring speed on the extraction yield were examined and optimized. Surfactant, carrier and diluent used were ECA4360, trilaurylamine (TLA) and dodecane, respectively; 2-ethylhexane-1,3-diol (EHD) is used as a co-surfactant. Under optimal conditions, emulsion breaking is very low and the swelling is kept at its lowest level. Under the pH conditions of fermentation medium, the extraction yield is lower. A mixer-settler continuous system was used for testing these conditions. The residence time, the number of extraction stages and the stability of the emulsion were studied and optimized. The extraction yield obtained exceeds 90%.

Conversion of Glucose and Xylose to 5-Hydroxymethyl furfural, Furfural, and Levulinic Acid Using Ethanol Organosolv Pretreatment under Various Conditions

  • Ki-Seob, GWAK;Chae-Hwi, YOON;Jong-Chan, KIM;Jong-Hwa, KIM;Young-Min, CHO;In-Gyu, CHOI
    • Journal of the Korean Wood Science and Technology
    • /
    • v.50 no.6
    • /
    • pp.475-489
    • /
    • 2022
  • The objective of this study was to understand the conversion characteristics of glucose and xylose using the major monosaccharide standards for lignocellulosic biomass. The acid-catalyzed organosolv pretreatment conducted using ethanol was significantly different from the acid-catalyzed process conducted in an aqueous medium. 5-hydroxymethylfurfural (5-HMF), levulinic acid and furfural were produced from glucose conversion. The maximum yield of 5-HMF was 5.5%, at 200℃, when 0.5% sulfuric acid was used. The maximum yield of levulinic acid was 21.5%, at 220℃, when 1.0% sulfuric acid was used. Furfural was produced from xylose conversion and under 0.5% sulfuric acid, furfural reached the maximum yield 48.5% at 210℃. Ethyl levulinate and methyl levulinate were also formed from the glucose standard following the esterification reaction conducted under conditions of the combined conversion method, which proceeded under both ethanol-rich and water-rich conditions.

Effect of Extracting Conditions on the Soluble Solid's Yield of Korean Red Ginseng (추출 조건이 홍미삼(紅尾蔘)의 가용성 물질의 용출률에 미치는 영향)

  • Sung, Hyun-Soon;Kim, Woo-Jung
    • Korean Journal of Food Science and Technology
    • /
    • v.18 no.2
    • /
    • pp.168-172
    • /
    • 1986
  • The swelling and hydration properties of Korean red ginseng tails and yield of total solids in extract were studied during extraction with ethanol solution having a concentration of 0-90% at $60-100^{\circ}C$. Extraction was carried out 5 times which was taken 8 hours per each time of extraction. The swelling, hydration and total solids yield were increased as the ethanol concentration decreased and as the extraction temperature raised. The cumulative value of solids yield suggested that three times of extractions with water or 70% ethanol were effective to recover more than 84%. Linear regression analysis on the properties investigated and extraction conditions showed a linear logarithmic relationship .

  • PDF

Dairy Cows of High Genetic Merit for Yields of Milk, Fat and Protein - Review -

  • Norman, H.D.;Powell, R.L.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.12 no.8
    • /
    • pp.1316-1323
    • /
    • 1999
  • Extensive emphasis on milk and milk fat yields with no diversion for beef performance increased the yield efficiency of North American dairy cattle. Heavy demand for North American genetics followed national strain comparison trials in Poland, and US and Canadian dairy cattle and germplasm still are an important source of genetics for many countries. Genetic improvement has accelerated in many countries because of the implementation of sampling programs for young bulls and improved evaluation procedures. Rapid access to information and more frequent calculation of genetic information also are having a positive impact on genetic improvement. Traits other than yield should be considered in a breeding program, but those traits mist have a reasonable opportunity for improvement and sufficient economic worth. Because of ever increasing efficiency, the world's milk supply comes from fewer cows each year. However, no decline in the rate of genetic improvement is apparent under current genetic practices; estimates of heritability are increasing, and a decline in yield efficiency is unlikely in the near future. As management improves, especially for subtropical conditions, many of the selection principles used in temperate climates will be adopted for more adverse environmental conditions.