• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.1
• /
• pp.105-110
• /
• 2007

Extraction characteristics of onion (Allium cepa) and the functional properties of corresponding extracts were monitored by the response surface methodology (RSM). The maximum extraction yield of 44.02% was obtained under the specific extraction conditions, such as microwave power of 143.13 W, ethanol concentration of 61.77% and extraction time of 3.39 min. The maximum electron donating ability (EDA) was found as 45.85% at the conditions of 143.55 W microwave power, 27.52% ethanol concentration and 4.86 min extraction time. The maximum inhibitory effect on tyrosinase was 65.40% at 132.29 W, 36.47% and 7.62 min. The maximum superoxide dismutase (SOD)-like activity was 69.84% under the extraction conditions of 99.41 W, 8.47% and 7.13 min. Based on superimposition of four dimensional RSM with respect to extraction yield, electron donating ability and SOD-like activity obtained under the various extraction conditions, the optimum ranges of extraction conditions were found to be microwave power of 0$\sim$120 W, ethanol concentration of 70$\sim$80% and extraction time of 2$\sim$10 min.

• Journal of Food Hygiene and Safety
• /
• v.37 no.1
• /
• pp.21-28
• /
• 2022

In this study, a new lactic acid bacterium (LAB) that could produce gamma-aminobutyric acid (GABA) was isolated from Oenanthe javanica (water celery) and identified as an Enteroccoccus casseliflavus strain. Until recently, there have been many studies on the gamma-aminobutyric acid producing lactic acid bacterium, as well as on some lactic acid bacterium in Enteroococcs genus, but none on the species E. casseliflavus. Therefore, in the purpose of finding the optimal conditions for GABA production of E. casseliflavus PL05, the effects of several conditions including the type of mediums, growth temperatures, initial pH, growth time, L-mono sodium glutamate (MSG) concentration, and carbon source were tested. The study revealed that the PL05 strain grew better in the Brain Heart Infusion (BHI) medium than in the Man, Rogosa, and Sharpe (MRS) or Tryptic Soy Broth (TSB) medium. Also, similar results were obtained with GABA production conditions. As a result of analysis on the GABA production yield by concentration of MSG, a GABA substrate, the highest production was found at 7% of MSG concentration. However, since similar level of production was found at 5%, it is considered to be more efficient to use 5% MSG concentration. The analysis on the growth and GABA production yield by carbon sources showed the highest results when maltose was used. From the final test under the optimal conditions found, 140.06±0.71 mM of GABA was produced over 24 hours with the conversion rate of 78.95%. Lastly, from the sensitivity analysis on the 10 different antibiotics, including vancomycin, it was found that there were not confirmed cases of resistance.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.414-422
• /
• 2022

The objective of this work was to investigate the feasibility of acid-catalyzed hydrothermal fractionation for maximum solubilization of the hemicellulosic portion of two typical agricultural residues. The fractionation conditions converted into combined reaction severity (CS) in the range of 1.2-2.9 was used to establish a simple reaction criteria at glance. The hemicellulosic sugar yield of 56.6% was shown when rice straw was fractionated at the conditions at the conditions; 160 ℃ of temperature 0.75% (w/v) of H₂SO₄, 20 min of reaction time, 1:15 solid/liquid ratio. The hemicellulosic sugar yield of 83.0%, however, was achieved when barley straw was fractionated at the conditions at the conditions; 150 ℃ of temperature 0.75% (w/v) of H₂SO₄, and 15 min of reaction time, 1:10 solid/liquid ratio. For barley straw, acid-catalyzed hydrothermal fractionation could be effectively performed. After the fractionation process, the remaining fractionated solids were 48.5% and 57.5% from raw rice and barley straws, respectively. The XMG contents in the solid residues decreased from 17.3% and 17.6% to 6.0% and 2.6%, which corresponded to 16.7% and 8.5% on the basis of the raw straws, respectively. In another way, only 5.6% of cellulose and 8.5% of XMG were lost due to excessive decomposition during the acid-catalyzed hydrothermal fractionation of barley straw, compared to cellulose and XMG losses of 6.4% and 26.6% in rice straw. Hemicellulosic sugars from the rice straw were considered more over-decomposed due to the somewhat higher reaction severity at the acid-catalyzed hydrothermal fractionation.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.2
• /
• pp.59-66
• /
• 2013

Among many factors, especially meteorological conditions can impact agricultural productivities. This study was conducted to analyze the relationships between crop yield and meteorological factors. We collected meteorological data (i.e., temperature and precipitation) from the Automated Weather System (AWS) of Korea Meteorological Administration (KMA) and the yield data of Chinese cabbage and Radish from local Nonghyup (NCAF:National Agricultural Cooperative Federation) and Farmers' Corporate Association. The agricultural data were classified into two groups. These groups are comprised of the farmers who produced a crop under 30 kg per $3.3m^2$ and over 30k g per $3.3m^2$ respectively. The daily meteorological data were calculated from the average value for ten days. Based on the regression analysis, we concluded that the yield of Chinese cabbage (Haenam) was related to average temperature, minimum temperature, precipitation, and number of days with precipitation, whereas that of Radish (Jeju) was related to average temperature, maximum temperature, and minimum temperature. The result suggests that these meteorological data can be used more effectively for the prediction of crop yield.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.4
• /
• pp.343-349
• /
• 1993

This study was conducted 1)to determine the factors responsible for the gradually increased rice yield by examining any improvements in yield-related characters and physiological characters among the historically recommended varieties of rice in Korea, and 2)to reveal the way of achieving further yield improvement by breeding in the future. Eight recommended varieties from 1911 to 1988 were selected and grown at the same conditions. The yield-related characters were observed at the harvest time, and the physiological characters such as RGR, NAR, LAR, SLA and L WR were estimated by the classical method of growth analysis. The newer varieties are shorter and those released after 1970's are greater in percent of filled spikelets and harvest index than the older varieties. There are no definite changing trends in the variations of number of panicles per hill, number of spikelets per panicle and 1000 grain weight according to the course of evolution in the recommended varieties. There is little evidence of improvement in the physiological characters such as NAR, LAR, SLA and LWR among the recently developed varieties compared with those of the older varieties. The increase in grain yield due to variety improvement, if any, is largely associated with the greater harvest index and percent of filled spikelets by breeding blight resistant and / or lodging resistant genotypes with short culm. It is suggested that increase in NAR should be carried out simultaneously with increase in harvest index to breed high yielding genotypes. I t appears to be important to breed genotypes with long culm in order to enhance light penetration into the canopy as long as they are lodging resistant. Since NAR is negatively correlated with LAR, it is unlikely to succeed to improve both characters simultaneously. The direct effect of NAR on RGR by path analysis is much larger than that of LAR, and hence it is suggested that breeding genotype with large NAR is more effective on enhancing RGR. It is also suggested that improving LAR through LWR is likely effective on increasing RGR.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.6
• /
• pp.577-584
• /
• 1994

A field trial was carried out to select suitable crops for diverted upland from paddy field and to investigate response of several forage crops to soil properties and ground water levels of the diverted upland at Suwon area of Korea in 1992 and 1993. Experiments were conducted in sandy loam plot and comparatively clay loam plot having higher ground water level. Rye (Paldang), triticale (Shinki), italian ryegrass (Tetraflorum) were used as wintering forage crops and maize(Suwon 19), sorghum-sudangrass hybrid(Pioneer855F), pearl millet(Suwon 6), japanese millet (King) were used as summer forage crops. Growth and yield of forage crops were better and higher in sandy loam soil having low ground water level. Among wintering forage crops, triticale recorded the highest forage yield. Rye showed high forage yield in sandy loam soil and italian ryegrass hardly survived in diverted upland of Suwon area during winter. Among summer forage crops, forage yield of sorghum-sudangrass hybrid was highest. Yield of japanese millet was not affected by soil conditions in both plots. Yields of pearl millet and maize remained relatively low in both plots.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.4
• /
• pp.347-354
• /
• 1992

Late harvest in peanut has often resulted in reduced yield and dissipation of labor by virtue of increasing over-matured pods causing the pod shattering. Present study was conducted to obtain a basic information for deciding optimum harvest time of the peanut in Chungbuk province by examination of yield components at different harvest time of leading cultivars Saedl and Youngho cultivated with vinyl mulching or non-mulching conditions. Peg number and pod number were significantly increased by vinyl mulching and also significantly different by the harvest time. Pod number increased with the lapse of days after flowering was gradually decreased from 100 days after flowering in saedl and 110 days in Youngho. Number of seed-bearing pods and matured seed percent were significantly increased by vinyl mulching and had tendency to increase with the lapse of days after flowering. There was no significant difference in number of over-matured pods and pod shattering percent between vinyl mulching and non-mulching. They increased drastically in 110 days after flowering in Saedl, but in 120 days after flowering in Youngho, Increase in 100 seed weight by vinyl mulching was statistically nonsignificant in both varieties, however, total seed yield was significantly increased by vinyl mulching, showing maximum yield in 100 days after flowering in the variety Saedl and 110 days in Youngho, respectively, Seed yield was negatively correlated to peg number and positively correlated to pod number, seed-bearing pod number, pod shattering percent, matured seed percent and 100 seed weight, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.4
• /
• pp.589-598
• /
• 2000

A pilot-scale Spray Drying Sorber (SDS) system was set up to evaluate the effect of spray characteristics on the desulfurization yield. The size distribution and the Sauter Mean Diameters of slurry droplets were measured in advance using the optical size measurement system, Malvern 2600. The desulfurization yield of the drying chamber by size was measured for the conditions of inlet gas and spray injection. As a reagent, 10% limestone slurry of $Ca(OH)_2$ was treated with flue gas containing $SO_2$, and the combustion gas analyzer and gas detectors were attached to measure the $SO_2$ concentration. With a flow rate of 144 Nm3/h and a temperature range of $200{\sim}300^{\circ}C$, the experiments were performed for the Stoichiometric Ratio (SR) of 1.0 to 3.0 and droplet mean diameter of 6.5 to $34.3{\mu}m$. In case of smaller spray droplets, the desulfurization efficiency improved due to the increase of total droplet surface area, while the reduction in evaporation time reduced the contact time between the droplets and $SO_2$ gas. In some typical region of droplet diameter, this negative effect, reduction of contact time, became dominant and the desulfurization yield decreases the desulfurization yield in spite of the expansion in absorption area. These results revealed that there exists the optimal size of spray droplets for a given state, which is determined by the compromise between the total surface area of slurry droplets and the evaporation time of droplets. The measurements also indicated that the inlet temperature of flue gas changes the optimal injection condition by varying the driving force for evaporation. The results confirm that the effect of the evaporation time of slurry droplets should be considered in analyzing the desulfurization yield as well as the total surface area, for it is a significant aspect of the correlation with the capabilities of $SO_2$ absorption in wet droplets. In conclusion, the optimal condition of spray can be determined based on these results, which might be applied to design or scale-up of SDS system.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.446-451
• /
• 2018

Effective ingredients were extracted using wheat sprout with high levels of flavonoids, and the extraction process was optimized with a central composite design model. The response value of the central composite design model establishes the extraction yield and the content of the flavonoids. The main and interactive effects were then analyzed depending on independent variables such as the extraction time, the volume ratio of alcohol to ultrapure water, and the extraction temperature. The extraction time and temperature were relatively large for the extraction yield. For the total flavonoids, the extraction time was most significantly affected. Considering both the extraction yield and the content of the total flavonoids, optimal extraction conditions were as follows: the extraction time (2.44 h), volume ratio of alcohol to ultrapure water (50.00 vol%), extraction temperature ($54.41^{\circ}C$). Under these condition, the extraction yield was 30.14 wt% and the content of the total flavonoids was $35.37{\mu}g\;QE/mL\;dw$. From the actual experimental result, the extraction yield under this condition was 29.92 wt% and the content of the total flavonoids was $35.32{\mu}g\;QE/mL\;dw$, which had an error rate of 0.39% and 0.74%, respectively. This is a multi-analysis comprehensive analysis that analyzes two simultaneous values of responses, but is considered to be highly accurate and also provides an excellent reliability of the optimization process in this study.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.5
• /
• pp.650-657
• /
• 2002

Two experiments were conducted to evaluate the effects of forage:concentrate ratios and feeding principles on milk yield, milk composition, body weight change, postpartum oestrus and feed cost. A total of 36 crossbred F1 cows (Holstein Friesian${\times}$Local Yellow) in the 8th week of lactation were used. In each experiment, animals were divided into three groups using a randomized block design according to the milk yield of the previous eight weeks. Cows were fed 30, 50 and 70% concentrate in the diet based on DM. In experiment 1 (Fc), cows were given the same amount of DM with constant ratios of forage and concentrate within treatments. In experiment 2 (Fa), cows were given the same constant amounts of concentrate as in experiment 1 and ad libitum forage. The forage consisted of a natural grass mixture based on 5 species of grasses with high nutritive values. There was no difference in total DM intake between treatments within experiments. However, cows fed forage ad libitum had higher DM intakes compared to cows fed constant forage (1.6, 4.5 and 9.5% for cows fed 70, 50 and 30% forage, respectively). Daily milk yield of cows fed forage ad libitum was higher than that of cows fed constant forage:concentrate ratio. Within experiment, milk yield was highest for cows fed 30% DM forage, followed by cows fed 50% and then cows fed 70% forage (11.17, 10.98 and 10.71 for the 30Fc, 50Fc and 70Fc cows; 11.73, 11.16 and 10.81 kg for the 30Fa, 50Fa and 70Fa cows, respectively). Decreased forage ratio in the diets resulted in decreased milk fat content and tended to increase milk protein. Increased concentrate ratio in the diet and feeding forage ad libitum increased body weight gain. The effect of forage:concentrate ratio on postpartum oestrus was not significant. The feed cost per kg milk produced was lowest for the cows fed 70% forage. It is concluded that increased ratio of concentrate resulted in increased body weight gain, milk yield, milk protein, and decreased milk fat. Feeding forage ad libitum increased feed intake, milk yield and body weight gain. The ratio of 50% forage is more suitable for milk production and animal condition, but in terms of feed cost and under the conditions of small dairy farmers, the 70% ad libitum forage feeding is recommended.