• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.1
• /
• pp.17-21
• /
• 1991

The study was performed to investigate the effects of gaseous emission of sulfur dioxide and hydrogen fluoride on the growth of rice plant under stressed field conditions. This study is specifically dealt with multiple effects of sulfur dioxide and hydrogen fluoride on various plant growth indicators such as leaf damage, weight of grain, panicles per hill, spikelets per panicle and percent fertility. It appears that there is a good correlation between ambient concentrations of sulfur oxides and sulfur contents found in leaves with an average correlation coefficient of 0.868 within a 1% significance level. A better multiple correlation was found between percent leaf damage and sulfur and fluorine contents found in leaf with a significance of 1% level. The correlation coefficient ranges from 0.807 to 0.978 with an average being 0.922. An evaluation of data observed has demonstrated that both panicles per hill and percent fertility are significantly affected by air pollutants. As expected, hydrogen fluorides have more effects than sulfur oxides. It is, however, interesting to note that spikelets per panicle has slightly been affected while no indication of effects on l000-grain weight has been observed. This may lead to a conclusion that a reduction in yield of rice under polluted field conditions may have more been caused by the diminution panicles per hill and percent fertility rather than by the diminution of spikelets per panicle and grain weight.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.1
• /
• pp.92-100
• /
• 2017

Acetoin (AC) is a volatile platform compound with various potential industrial applications. AC contains two stereoisomeric forms: (3S)-AC and (3R)-AC. Optically pure AC is an important potential intermediate and widely used as a precursor to synthesize novel optically active materials. In this study, chiral (3R)-AC production from meso-2,3-butanediol (meso-2,3-BD) was obtained using recombinant Escherichia coli cells co-expressing meso-2,3-butanediol dehydrogenase (meso-2,3-BDH), NADH oxidase (NOX), and hemoglobin protein (VHB) from Serratia sp. T241, Lactobacillus brevis, and Vitreoscilla, respectively. The new biocatalyst of E. coli/pET-mbdh-nox-vgb was developed and the bioconversion conditions were optimized. Under the optimal conditions, 86.74 g/l of (3R)-AC with the productivity of 3.61 g/l/h and the stereoisomeric purity of 97.89% was achieved from 93.73 g/l meso-2,3-BD using the whole-cell biocatalyst. The yield and productivity were new records for (3R)-AC production. The results exhibit the industrial potential for (3R)-AC production via whole-cell biocatalysis.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.3
• /
• pp.301-309
• /
• 2006

KDC-1 canister for PWR spent fuels which will be used for the Korean Reference Disposal System was developed. The structural analysis of the canister was carried out as a part of the safety analysis. Two conditions, disposal condition and handling condition, were considered for the structural analysis. Three kinds of load cases, normal, abnormal and rock movement, were considered for the disposal condition. The results of the calculation showed that the safety factors from the structural analysis were greater than the design requirements. Two accident scenarios, gripper failure accident and canister drop accident, were analyzed for the handling condition. According to the gripper failure scenario analysis, the handling machine with grippers could be used even in the cases that one or two grippers failed. The maximum von Mises stress from the canister drop accident scenario was 0.762 MPa, which was negligible compared with the yield stress of nodular cast iron. The proposed KDC-1 canister for PWR spent fuels proves to be safe under the repository condition that is based upon the Korean reference disposal system according to the structural analysis for disposal condition and handling condition.

• Journal of Biosystems Engineering
• /
• v.7 no.2
• /
• pp.72-85
• /
• 1983

Rice whitening is performed by basically two different whitening actions known as abrasive and frictional. The former adopted in the emery stone abrasive type whiteners and the latter in the jet-air friction type. Comparative milling yields and whitening efficiencies between the whitening system consisting of jet-air friction type whiteners only and the system consisting of both abrasive- and jet-air friction-types have not yet been rigorously defined. This study was to examine the effect of combined operations of abrasive- and jet-air friction-type rice whiteners on milling yields and whitening efficiencies. The small capacity commercial units of the abrasive- and friction-type whiteners were used for the experiments. The combinations of whitening treatments were: 1) Once in the abrasive type and then two to three times in the friction type, 2) twice in the abrasive and then two to three times in the friction type and 3) three to five times in friction type. In these tests, counter pressures for the friction type whiteners were established differently as required to get about the same degree of whitening at the end of predetermined numbers of the repeated operations. The speed of emery stone and the slot angle of the screen were also the factors varied in the abrasive type whitener. Sheukwang rice variety having 13.05% M.C. was used in the tests. The dependent variables were the milled- and head-rice recoveries and electricity consumption. The results of the study are summarized as follows: 1. It was found that in the whitening systems consisting of abrasive- and friction-type whiteners slot angle of the screen, the rotational speed of emery stone roller had significant effect on the milling yields and whitening efficiency. In general, the increase of the emery stone roller speed from 690 to 950 rpm presented a positive effect on milling yield, and one-pass abrasive milling combinations had higher milling yields than two-pass abrasive milling combinations. 2. It was apparent that if the slot angle of the screen and the speed of emery stone roller are modified and set at an optimum level, the combination whitening system consisting of abrasive- and friction-type whiteners is better than the pure frictional whitening system consisting of jet-air friction type in terms of milling yields and efficiencies. 3. In the rice whitening system consisting of abrasive- and jet-air friction-type whiteners, the best whitening performance was obtained when the slot angle of the screen and the rotational speed of emery stone roller were $45^{\circ}$ and 950rpm, respectively, for the one-pass abrasive milling combinations. However, for the two-pass abrasive mi11ing combinations, the best performance was obtained with $75^{\circ}$ of slot angle and 950 rpm of the emery stone roller speed. 4. As compared with pure frictional whitening systems, the combination systems produced more milled rice by 0.8-1.0% point and more head rice by 0.5-1.5% point, and consumed less electricity by 0.15-0.20 KwH per 100kg of milled rice when the abrasive whiteners were operated in the modified conditions as described in item 3 above. Further study is recommended to find out optimum operational and design conditions of abrasive type whiterners.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.9
• /
• pp.1308-1321
• /
• 2013

The emergence of microcarrier technology has brought a renewed interest in anchorage-dependent cell culture for high-yield processes. Well-known in vaccine production, microcarrier culture also has potential for application in other fields. In this work, two types of microcarriers were evaluated for small-scale monoclonal antibody (mAb) production by CHO-K1 cells. Cultures (5 ml) of microporous Cytodex 3 and macroporous CultiSpher-S carriers were performed in vented conical tubes and subsequently scaled-up (20 ml) to shake-flasks, testing combinations of different culture conditions (cell concentration, microcarrier concentration, rocking methodology, rocking speed, and initial culture volume). Culture performance was evaluated by considering the mAb production and cell growth at the phases of initial adhesion and proliferation. The best culture performances were obtained with Cytodex 3, regarding cell proliferation (average $1.85{\pm}0.11{\times}10^6$ cells/ml against $0.60{\pm}0.08{\times}10^6$ cells/ml for CultiSpher-S), mAb production ($2.04{\pm}0.41{\mu}g/ml$ against $0.99{\pm}0.35{\mu}g/ml$ for CultiSpher-S), and culture longevity (30 days against 10-15 days for CultiSpher-S), probably due to the collagen-coated dextran matrix that potentiates adhesion and prevents detachment. The culture conditions of greater influence were rocking mechanism (Cytodex 3, pulse followed by continuous) and initial cell concentration (CultiSpher-S, $4{\times}10^5$ cells/ml). Microcarriers proved to be a viable and favorable alternative to standard adherent and suspended cultures for mAb production by CHO-K1 cells, with simple operation, easy scale-up, and significantly higher levels of mAb production. However, variations of microcarrier culture performance in different vessels reiterate the need for optimization at each step of the scale-up process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.1
• /
• pp.31-38
• /
• 1997

Changes in bile acid binding rapacity in vitro and physical properties of alginate extracted from sea tangle (Laminaria spp.) and residue after extracting alginate (RAEA) were investigated. For the purpose, extraction conditions controlled under 1, 3 and $5\%$ of sodium carbonate solution, and 1, 3, 5 and 10 hours of extraction time at $60^{\circ}C$. The less sea tangle had particle size and the higher concentration of sodium carbonate solution increseded, the more yield of alginate gained. High concentration of sodium carbonate solution and long extraction time resulted in weakly binding capacity in vitro by alginate. Among four bile acids, binding capacites with alginate were in the order of cholic, taurocholic acid>glycocholic acid>deoxycholic acid. The binding capacity of RAEA was rated at almost same degree of alginate. For increasing the binding capacity of bile acids by alginate, it was subject to high viscosity and degree of polymerization.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.3
• /
• pp.259-264
• /
• 2002

In order to develope nutritional and flavoring intermediate products, the optimal processing conditions for two stage enzyme hydrolysate (TSEH) from low-utilized conger eel scrap such as head and intestine were investigated. The optimal processing conditions for TSEH were revealed in temperature at $55^{\circ}C$ 3$\~$4 hours digestion with alcalase at the 1st stage, and 4 hours at $45{\~}50^{\circ}C$ digestion with neutrase at the 2nd stage. Among water extract, steam extract and enzyme hydrolysates of conger eel scrap, the present TSEH was superior to other extracts in terms of yield ana organoleptic taste such as harmonic umami and inhibition of fishy and greasy taste formation. From the results of chemical experiments and sensory evaluation, we may conclude that TSEH of conger eel scrap could be utilized as the flavoring intermediate materials for the fisheries products such as flavoring sauces, drinkable beverage and instant food materials.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.3
• /
• pp.247-252
• /
• 2002

To prepare the edible film based on fish protein, the optimal conditions for extracting soluble protein from Alaska pollack ( Theragra chalcogramma) and mackerel (Scomber japonious) muscle were defined. The effects of protein concentration, pH and temperature of protein solution on the physical properties of films were also investigated, Contents of moisture, crude protein, crude lipid and ash in Alaska pollack muscle were 79.6, 18.2, 0.6 and $1.2\%$, respectively. Contents of moisture, crude protein, crude lipid and ash in mackerel muscle were 69,1, 20.1, 9,5 and $1.3\%$, respectively. Both soluble protein contents extracted from Alaska pollack and mackerel were the highest at pH 12.0, and then un 2.0, 11.0. But they were extracted a little at neutral range. forward the recovery yield of protein by controlling isoelectric point was the highest at pH 4.8 ($79.8\%$) for Alaska pollack and at pH 5.0 ($64.1\%$) for mackerel, For the preparation of protein films from both Alaska pollack and mackerel, the most effective conditions of film forming solution were achieved, after supplied fish protein 4 g (glycerol 1,6 g) in 100 mL of distilled water, by adjusted to pH 10.0 and then heated at $90^{\circ}C$.

• Microbiology and Biotechnology Letters
• /
• v.8 no.2
• /
• pp.93-102
• /
• 1980

Fungi which were capable of producing gluconic acid were isolated from soil and tree leave samples, which had been collected in Seoul ana its vicinity. Among the 19 strains isolated, a strain named arbitrarily KUF-O4 was selected as a test strain chiefty because of its efficiency in gluconic acid production. The strain was identified as an Aspergillus sp. through its morphological properties. Optimum conditions for the gluconic acid production of KUF-O4 were investigated. The results obtained are as follows. 1. An incubation period of at least 30 hours was required for a good yield of gluconic acid. 2. A medium containing 10％ glucose needed at least 3 ％ CaCo$_3$to maintain the optimum pH for the production of gluconic acid during fermentation. 3. As a carbon source, glucose was the most effective one among the carbon sources tested. 4. As a nitrogen source, an ammonium salt was more effective than any other form of nitrogen compounds. 5. As mineral source, a small amount of both KH$_2$PO$_4$and MgSO$_4$was found to be necessary to increase the efficiency of the gluconic acid production.

• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.50-57
• /
• 2006

Production of activated carbon from woody fish parking cases has been studied using waste sulfuric acid as an activating agent for the purpose or promoted recycling of woody fishing port wastes. The adsorption capacity of produced activated carbon was observed to increase with activation temperature and reached its maximum at ca. $650^{\circ}C$ under the experimental conditions. However, the adsorption capacity of activated carbon became deteriorated above this temperature due to the thermal degeneration of its structure. Optimal activation time was found to be about 120 minutes and 1:3 weight ratio of raw material and activating agent was appropriate for increased adsorption capacity of activated carbon under the conditions of $550^{\circ}C$ and 60 minutes of activation time. Regarding the effect of the concentration of activating agent on activation, ca. 1.2 M of sulfuric acid was observed to be proper for an optimal activation or raw material. Comparison of the activation power of sulfuric acid with nitric acid showed that sulfuric acid was superior to nitric acid, however, with regard to the yield of activated carbon there was no significant difference between the two activating agents. The degree of dispersion of carbon particles was shown to be relatively high in neutral condition and the produced activated carbon was considered to be effectively employed for the treatment of metal ions in wastewater due to its negative surface charge in aqueous condition.