• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.158-163
• /
• 2023

Recently, the global demands for high voltage power semiconductors are increasing across various industrial fields. The use of electric cars with high safety and convenience is becoming practical, and IGBT modules of 3.3 kV and 1.2 kA or higher are used for electric locomotives. Delicate design and advanced process technology are required, and research on the optimization of high-voltage IGBT parts is urgently needed in the industry. In this study, we attempted to design a simulation process through TCAD (technology computer-aid design) software to optimize the process conditions of the fielding process among the core unit processes for an especial high yield voltage. As well, the prior circuit technology design and a ring pattern with a large number of ring formation structures outside the wafer similar to the chip structure of other companies were constructed for 3.3 kV NPT-IGBT through a unit process demonstration experiment. The ring pattern was designed with 21 rings and the width of the ring was 6.6 ㎛. By changing the spacing between patterns from 17.4 ㎛ to 35.4 ㎛, it was possible to optimize the spacing from 19.2 ㎛ to 18.4 ㎛.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.85-85
• /
• 2020

South Korea experiences few large scale erosion and sedimentation problems, however, there are numerous local sedimentation problems. A reliable and consistent approach to modelling and management for sediment processes are desirable in the country. In this study, field measurements of sediment concentration from 34 alluvial river basins in South Korea were used with the Modified Einstein Procedure (MEP) to determine the total sediment load at the sampling locations. And then the Flow Duration-Sediment Rating Curve (FD-SRC) method was used to estimate the specific degradation for all gauging stations. The specific degradation of most rivers were found to be typically 50-300 tons/㎢·yr. A model tree data mining technique was applied to develop a model for the specific degradation based on various watershed characteristics of each watershed from GIS analysis. The meaningful parameters are: 1) elevation at the middle relative area of the hypsometric curve [m], 2) percentage of wetland and water [%], 3) percentage of urbanized area [%], and 4) Main stream length [km]. The Root Mean Square Error (RMSE) of existing models is in excess of 1,250 tons/㎢·yr and the RMSE of the proposed model with 6 additional validations decreased to 65 tons/㎢·yr. Erosion loss maps from the Revised Universal Soil Loss Equation (RUSLE), satellite images, and aerial photographs were used to delineate the geospatial features affecting erosion and sedimentation. The results of the geospatial analysis clearly shows that the high risk erosion area (hill slopes and construction sites at urbanized area) and sedimentation features (wetlands and agricultural reservoirs). The result of physiographical analysis also indicates that the watershed morphometric characteristic well explain the sediment transport. Sustainable management with the data mining methodologies and geospatial analysis could be helpful to solve various erosion and sedimentation problems under different conditions.

• Genomics & Informatics
• /
• v.20 no.4
• /
• pp.45.1-45.7
• /
• 2022

Food security will be affected by climate change worldwide, particularly in the developing world, where the most important food products originate from plants. Plants are often exposed to environmental stresses that may affect their growth, development, yield, and food quality. Auxin is a hormone that plays a critical role in improving plants' tolerance of environmental conditions. Auxin controls the expression of many stress-responsive genes in plants by interacting with specific cis-regulatory elements called auxin-responsive elements (AuxREs). In this work, we performed an in silico prediction of AuxREs in promoters of five auxin-responsive genes in Zea mays. We applied a data fusion approach based on the combined use of Dempster-Shafer evidence theory and fuzzy sets. Auxin has a direct impact on cell membrane proteins. The short-term auxin response may be represented by the regulation of transmembrane gene expression. The detection of an AuxRE in the promoter of prolyl oligopeptidase (POP) in Z. mays and the 3-fold overexpression of this gene under auxin treatment for 30 min indicated the role of POP in maize auxin response. POP is regulated by auxin to perform stress adaptation. In addition, the detection of two AuxRE TGTCTC motifs in the upstream sequence of the bx1 gene suggests that bx1 can be regulated by auxin. Auxin may also be involved in the regulation of dehydration-responsive element-binding and some members of the protein kinase superfamily.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.43 no.2
• /
• pp.75-87
• /
• 2023

This research was conducted to analyze the cultivation performance and meteorological data of winter rye in Suwon, Gyeonggi Province, and Daegu for 11 years. The objective was to compare the growth and yield of domestically cultivated Korean rye cultivar "Gogu" and identify the factors influencing them, to determine suitable cultivation areas for Korean rye cultivar in the country. The results of the study showed that both Daegu and Suwon regions possess favorable climatic conditions for winter rye cultivation, with Suwon exhibiting a superior moisture supply compared to Daegu. Furthermore, the analysis of climate suitability revealed that rainfall days and precipitation were significant factors affecting rye cultivation. Through correlation and principal component analysis, the research evaluated the interrelationship between climate, cultivation factors, and winter rye crop performance, as well as identified variations among winter rye cultivation regions. This study provides valuable insights and information for winter rye cultivation in the country, thereby assisting in the decision-making process for selecting optimal cultivation areas.

• Journal of TMJ Balancing Medicine
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2022

Objectives: For the deviation phenomenon occurring during the treatment process in temporo-mandibular balancing medicine (TBM), hypotheses were established regarding the cause and mechanism of formation from the perspective of neuro-science and material mechanics, and a verification method was proposed. Methods: The deviation phenomenon was theoretically analyzed based on the structure theories of material mechanics of the joint and the neurological pain mechanism. Results: Deviation occurs due to temporary yield by the accumulation of heterogeneous stress in the temporo-mandibular joint and the affected joint. Because the joint structures are corresponding with material mechanics showing compressive and tensile properties. The size of the deviation is expressed in terms of strain. The occlusal surface of the teeth is level with the axial joint. Since the magnitude of the deviation has a proportional relationship with the degree of abnormality of the temporo-mandibular joint, the magnitude of the deviation calculated by the balance measurement can be replaced by the strain. The major variables involved in the occurrence of deviations are the strength of joint structures and neurological conditions. Therefore plastic deformation and adaptation occur as a long-term depression of neural circuits is strengthened in different ways at different locations each time in various clinical situations. This is the reason why the sequence of the restoration process while correcting deviations is following reverse order of the accumulation in many layers in the muscular nervous system. Conclusions: From the above results, it can be inferred that the occurrence and correction of the deviations are corresponding with the plastic deformation and neuro-plasticity.

• Research in Plant Disease
• /
• v.29 no.2
• /
• pp.200-203
• /
• 2023

Climate change has occurred frequently, and it lead to a severe decrease in marketability and productivity. Onion has various functional elements related to antioxidant, antibacterial, anticancer and immune enhancement, the productivity is closely affected by climate conditions. In this study, to environmentally-friendly produce onions even though drought condition, effect of Bacillus aryabhattai H19-1 on the yield, marketability, and functional component of onions was evaluated in a field. When strain H19-1 was drenched, onion production and marketability significantly increased, and the contents of ascorbic acid and carotenoid of harvested onion bulbs also increased. Therefore, B. aryabhattai H19-1 is expected to be effective in enhancing onion productivity by mitigating drought stress.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.144-144
• /
• 2022

The amount of required forage is increasing by 20% every year in South Korea, but the cultivation area for forage production is limited. The yield ability of triticale forage is the highest among the winter forage crops including rye and the crop has cold tolerance within the average low temperature of -10℃ in January. Therefore, this study analyzed effects of sowing and harvesting times on feed value and quality for efficiently using and supplying triticale as livestock feed. Seed of the triticales, 'Joseong' was sown in 2021 fall (October) and 2022 spring (March). The triticales were harvested according to growth stages: seedling stage, booting stage, heading stage, 10 days after heading, and 20 days after heading. Moisture contents of each harvested triticales were adjusted to about 60%, and then the triticales were fermented for 40 days at room temperature under anaerobic conditions as silage. We have analyzed pH and organic acid to determine the feed value and quality of each silage. The contents of lactic acid in silage ofthe triticale harvested at the seedling stage of both fall and spring-sown (1.61%, 1.63%) were the highest among all of the silages; the booting stage (0.75%, 1.33%), the heading stage (0.50%, 0.69%), 10 days after the heading stage (0.31%, 0.42%), and 20 days after heading stage (0.22%, 0.40%). Such as the contents of lactic acid in the silages, and the pH value of the silages The pH value in both the fall- and spring-sown became lower as the triticale was grown up: seedling stage (7.05, 6.85), booting stage (6.21, 6.75), heading stage (6.18, 6.28), 10 days after heading stage (6.22, 6.17), and 20 days after heading stage (6.15, 5.81). Taken together, the results showed that the feed value and quality of triticale silage were more affected by harvesting time than sowing time.

• Journal of Animal Science and Technology
• /
• v.65 no.5
• /
• pp.939-950
• /
• 2023

This study was conducted to assess the impact of growing condition variables on alfalfa (Medicago sativa L.) productivity. A total of 197 alfalfa yield results were acquired from the alfalfa field trials conducted by the South Korean National Agricultural Cooperative Federation or Rural Development Administration between 1983 and 2008. The corresponding climate and soil data were collected from the database of the Korean Meteorological Administration. Twenty-three growing condition variables were developed as explaining variables for alfalfa forage biomass production. Among them, twelve variables were chosen based on the significance of the partial-correlation coefficients or potential agricultural values. The selected partial correlation coefficients between the variables and alfalfa forage biomass ranged from -0.021 to 0.696. The influence of the selected twelve variables on yearly alfalfa production was summarized into three dominant factors through factor analysis. Along with the accumulated temperature variables, the loading scores of the daily mean temperature higher than 25℃ were over 0.88 in factor 1. The sunshine duration at temperature between 0℃-25℃ was 0.939 in factor 2. Precipitation days were 0.82, which was the greatest in factor 3. Stepwise regression applied with the three dominant factors resulted in the coefficients of factors 1, 2, and 3 for 0.633, 0.485, and 0.115, respectively, and the R-square of the model was 0.602. The environmental conditions limiting alfalfa growth, such as daily temperature higher than 25℃ or daily mean temperature affected annual alfalfa production most substantially among the growing condition variables. Therefore, future cultivar selection should consider the capability of alfalfa to be tolerant to extreme summer weather along with biomass production potential.

• Journal of Hydrogen and New Energy
• /
• v.34 no.6
• /
• pp.581-586
• /
• 2023

As the development of alternative energy is required due to the depletion of fossil fuels, interest in the use of hydrogen energy is increasing. Hydrogen is a promising clean energy source with high energy density and can lead to the application of environmentally friendly technologies. However, due to difficulties in production, storage, and transportation that prevent the application of hydrogen-based eco-friendly technology, research on reforming reactions using dimethyl ether (DME) is being conducted. Unlike other hydrocarbons, DME is attracting attention as a hydrogen carrier because it has excellent storage stability and transportability, and there is no C-C bond in the molecule. The reaction between DME and steam is one of the reforming processes with the highest hydrogen yield in theory at a temperature lower than that of other hydrocarbons. In this study, a hydrogen reforming device using DME was developed and a catalyst prepared by supporting Cu in alumina was put into a reactor to find optimal hydrogen production conditions for supplying hydrogen to fuel cells while changing reaction temperature (300-500℃), pressure (5-10 bar), and steam/carbon ratio (3:1 to 5:1).

• Journal of Environmental Science International
• /
• v.32 no.11
• /
• pp.777-788
• /
• 2023

Potato common scab disease is caused by pathogens belonging to Streptomyces spp. and results in a serious yield loss worldwide. Despite decades of research aimed at disease management, a definitive control method remains undiscovered. This study aims to explore the correlation between the C/N ratio and urea application with potato common scab pathogen dynamics and disease severity. We applied sawdust with a high C/N ratio and urea into the soil prior to potato cropping, both in pot and field experiments. Disease severity assessments and quantification of the TxtB gene were conducted at the harvest stage. Furthermore, culture experiments were performed to assess the direct impact of urea on the pathogen. Our findings revealed that higher disease severity was correlated with a high C/N ratio application and pathogenic gene quantity. Urea exhibited a direct influence on S. scabiei activity, reducing the disease severity in pot experiments. However, the effects of urea application on disease suppression in the conductive field were inconclusive. Although the results of urea application experiments displayed inconsistencies between pot and field trials, urea worked as the control to suppress S. scabiei activity. Further investigations are needed under various field conditions to confirm these findings.