• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.12
• /
• pp.21-24
• /
• 1972

1. The experiment was carried out to control the unfilled fruits in peanut with lime and potassium application. 2. There was increased tendency in branch length and numbers in accordance with the increased amount of lime and potassium, but the decreased tendency was found at over applied conditions of them. 3. Fresh weight of vegetative part was increased along with the increased amount of lime application by 100kg/10a. 4. Increased lime and potassium within the certain amount decreased the ratio of unfilled fruits. These fact raised were considered due to not only the increased number of two filled shell but the decreased number of one filled or unfilled shell. 5. Seed weight was influenced by both lime and potassium but lime seemed to have more effectiveness. Interaction between lime and potassium on seed weight was highly significant. 6. For the control of unfilled shell and obtain higher yield, it desirable to apply 15kg/10a of potassium and 100kg/10a of lime with optimum amount of nitrogen and phosphorous.

• Journal of Animal Reproduction and Biotechnology
• /
• v.37 no.4
• /
• pp.266-275
• /
• 2022

The impact of heat stress (HS) on reproductive performance and its problems in cows remains to be investigated in Bangladesh. The study was, therefore, aimed to evaluate the effect of HS on fertility and reproductive health problems of dairy cows in a selected area of Bangladesh. A total of 1,095 cows from 500 farms were included in this study. The climate-related data were recorded daily basis for every month in a year and temperature-humidity index (THI) values were calculated to determine the level of HS. Concurrently, data on fertility parameters [number of services per conception (NSC), conception rate (CR) and calving to the first service interval (CFSI)], and reproductive problems were collected through a pre-defined questionnaire. The results show that crossbred [Native x Holstein-Friesian, (HF)] cows were more vulnerable (p < 0.05) to a magnitude of HS effects considering physiological parameters of cows [age, body condition score (BCS), parity and milk yield]. Regarding fertility, HS had no effect on NSC, CR and CFSI in both native and crossbred cows (p > 0.05). The findings on the reproductive problems indicate that HS had significant influence on the prevalence of anestrus (χ² = 21.814, p < 0.05) and retained placenta (χ² = 24.632, p < 0.05) in cows. Of note, the prevalence of repeat breeding syndrome was 2.5 folds higher in stress condition than in no stress condition. Abortion and dystocia were not influenced by HS. In conclusion, HS does not influence the fertility parameters of cows studied; however, anestrus and retained placenta are likely to occur under HS conditions in cows.

• Korean Journal of Agricultural Science
• /
• v.49 no.2
• /
• pp.379-387
• /
• 2022

A large amount of the mineral nitrogen is necessary for crop growth. With the use of nitrogen fertilizers, agricultural yield has increased during the last few decades. However, at the same time, nitrate from the cultivated land can be a source of environmental pollution, especially in water systems. For nitrogen management, it is necessary to analyze the pattern of nitrogen movement in soil. In this study, nitrogen leaching in upland soils was evaluated using undisturbed lysimeters with different soil textures during sesame cultivation. The soil texture of the lysimeters was clay loam (Songjung series) and sandy loam (Sangju series) soils. Sesame was cultivated from May 25 to August 24 in 2020. The standard amount of NPK fertilizer (N-P₂O₅-K₂O = 2.9-3.1-3.2 kg·10 a^-1) was applied before sowing. The amount of nitrogen leaching was calculated by multiplying the nitrogen (NO₃-N + NH₄-N) concentration and the amount of water drained below 1.5 m soil depth. The water was drained through percolation into macropores in the clay loam lysimeter. In contrast, in the sandy loam lysimeter, water drained more slowly than in the clay loam lysimeter. There was a slight difference in the total amount of leachate during the cultivation period, but the amount of nitrogen leaching was high in sandy loam soil. During the sesame cultivation period, the amount of nitrogen leaching from clay soil was 5.64 kg·10 a^-1, and 10.70 kg·10 a^-1 for sandy soil. We found that there was a difference in leaching depending on the soil physical characteristics. Therefore, it is necessary to consider the characteristics of soil to evaluate the leaching of nitrogen.

• Food Science of Animal Resources
• /
• v.43 no.1
• /
• pp.46-60
• /
• 2023

Slaughterhouse blood is a by-product of animal slaughter that can be a good source of animal protein. This research purposed to examine the functional qualities of the blood plasma from Hanwoo cattle, black goat, and their hydrolysates. Part of the plasma was hydrolyzed with proteolytic enzymes (Bacillus protease, papain, thermolysin, elastase, and α-chymotrypsin) to yield bioactive peptides under optimum conditions. The levels of hydrolysates were evaluated by 15% sodium dodecyl sulfate polyacrylamide gel electrophoresis. The antioxidant, metal-chelating, and angiotensin I-converting enzyme (ACE) inhibitory properties of intact blood plasma and selected hydrolysates were investigated. Accordingly, two plasma hydrolysates by protease (pH 6.5/55℃/3 h) and thermolysin (pH 7.5/37℃/3-6 h) were selected for analysis of their functional properties. In the oil model system, only goat blood plasma had lower levels of thiobarbituric acid reactive substances than the control. The diphenyl picrylhydrazyl radical scavenging activity was higher in cattle and goat plasma than in proteolytic hydrolysates. Ironchelating activities increased after proteolytic degradation except for protease-treated cattle blood. Copper-chelating activity was excellent in all test samples except for the original bovine plasma. As for ACE inhibition, only non-hydrolyzed goat plasma and its hydrolysates by thermolysin showed ACE inhibitory activity (9.86±5.03% and 21.77±3.74%). In conclusion, goat plasma without hydrolyzation and its hydrolysates can be a good source of bioactive compounds with functional characteristics, whereas cattle plasma has a relatively low value. Further studies on the molecular structure of these compounds are needed with more suitable enzyme combinations.

• Korean Journal of Plant Resources
• /
• v.35 no.6
• /
• pp.825-830
• /
• 2022

"Doha" is a new strawberry (Fragaria x ananassa Duch.) variety, which was released by the Highland Agriculture Research Institute in 2021. The "Doha" variety originates from a 2014 cross between "Saebong No. 3" and "Yeolha," both of which exhibited excellent ever-bearing characteristics, including continuous flowering and large fruits under long-day and high temperature conditions. This new cultivar was initially named "Saebong No. 13" after examining its characteristics and productivity during summer cultivation between 2015 and 2018. After regional adaptability tests, "Doha" was selected from "Saebong No. 13" as an elite cultivar. The general characteristics of "Doha" include spreading, elliptic leaves, and strong growth. The fruits are long and conical and of a red color. The plant height of "Doha" was similar to that of "Goha," but the number of leaves was lower. The number of flower clusters of "Doha" was 8.6, which was 2.8 fewer than that of the control variety, "Goha," with 11.4. The average fruit weight of "Doha" was 13.9 g, which was 4.9 g heavier than that of "Goha." The fruit hardness of "Doha" was 35.5 g·mm^-2, which was 9.4 g·mm^-2 harder than that of "Goha." The marketable yield of "Doha" was 26,971 kg·ha^-1, 125% more than that of "Goha" with 21,479 kg·ha^-1. The findings of this study suggest that "Doha" is a hard fruit and high-yielding variety of ever-bearing strawberries that could increase farming income when distributing to farmers.

• Steel and Composite Structures
• /
• v.47 no.2
• /
• pp.269-287
• /
• 2023

The WGJ420 fire-resistant weathering (FRW) steel is developed and manufactured with standard yield strength of 420 MPa at room temperature, which is expected to significantly enhance the performance of steel structures with excellent fire and corrosion resistances, strong seismic capacity, high strength and ductility, good resilience and robustness. In this paper, the mechanical properties of FRW steel plates and buckling behavior of columns are investigated through tests at elevated temperatures. The stress-strain curves, mechanical properties of FRW steel such as modulus of elasticity, proof strength, tensile strength, as well as corresponding reduction factors are obtained and discussed. The recommended constitutive model based on the Ramberg-Osgood relationship, as well as the relevant formulas for mechanical properties are proposed, which provide fundamental mechanical parameters and references. A total of 12 FRW steel welded I-section columns with different slenderness ratios and buckling load ratios are tested under standard fire to understand the global buckling behavior in-depth. The influences of boundary conditions on the buckling failure modes as well as the critical temperatures are also investigated. In addition, the temperature distributions at different sections/locations of the columns are obtained. It is found that the buckling deformation curve can be divided into four stages: initial expansion stage, stable stage, compression stage and failure stage. The fire test results concluded that the residual buckling capacities of FRW steel columns are substantially higher than the conventional steel columns at elevated temperatures. Furthermore, the numerical results show good agreement with the fire test results in terms of the critical temperature and maximum axial elongation. Finally, the critical temperatures between the numerical results and various code/standard curves (GB 51249, Eurocode 3, AS 4100, BS 5950 and AISC) are compared and verified both in the buckling resistance domain and in the temperature domain. It is demonstrated that the FRW steel columns have sufficient safety redundancy for fire resistance when they are designed according to current codes or standards.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.7 no.2
• /
• pp.85-91
• /
• 2021

Selective amino acid conjugation of bulky antibodies is a valuable asset for real-time diagnosis and therapy. However, selective conjugation incorporating a chelate-bearing radioactive atom into an antibody without affecting its immunoreactivity is a challenging task. A bifunctional chelator (BFC), a selective amino acid-targeting probe, and a linker have been developed to overcome this problem. Here, we report the synthesis of a novel propylene cross-bridged chelator (PCB)-1,8-N,N'-bis-(carboxymethyl)-1,4,8,11-tetraazacyclotetradecane (TE2A)-luminol BFC via a click reaction and radiolabel it with a ⁶⁴Cu ion for tyrosine-selective conjugation of trastuzumab. In the initial optimization study, we tried different oxidative addition conditions such as electro-oxidation, hemin, horseradish peroxidase, iodogen tube, chloramine-T, and iodo beads. In this study, up to 82% of ⁶⁴Cu-PCB-TE2A-luminol was conjugated with the antibody in an iodo bead-catalyzed oxidative addition reaction with an isolated yield of 24.4%.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.1
• /
• pp.127-134
• /
• 2023

Laccase activity is influenced by copper (Cu) as an inducer. In this study, laccase was immobilized on Cu and Cu-magnetic (Cu/Fe₂O₄) nanoparticles (NPs) to improve enzyme stability and potential applications. The Cu/Fe₂O₄ NPs functionally activated by 3-aminopropyltriethoxysilane and glutaraldehyde exhibited an immobilization yield and relative activity (RA) of 93.1 and 140%, respectively. Under optimized conditions, Cu/Fe₂O₄ NPs showed high loading of laccase up to 285 mg/g of support and maximum RA of 140% at a pH 5.0 after 24 h of incubation (4℃). Immobilized laccase, as Cu/Fe₂O₄-laccase, had a higher optimum pH (4.0) and temperature (45℃) than those of a free enzyme. The pH and temperature profiles were significantly improved through immobilization. Cu/Fe₂O₄-laccase exhibited 25-fold higher thermal stability at 65℃ and retained residual activity of 91.8% after 10 cycles of reuse. The degradation of bisphenols was 3.9-fold higher with Cu/Fe₂O₄-laccase than that with the free enzyme. To the best of our knowledge, Rhus vernicifera laccase immobilization on Cu or Cu/Fe₂O₄ NPs has not yet been reported. This investigation revealed that laccase immobilization on Cu/Fe₂O₄ NPs is desirable for efficient enzyme loading and high relative activity, with remarkable bisphenol A degradation potential.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.2
• /
• pp.77-85
• /
• 2023

In this study, the mechanical properties of the Al-Mg-X (X=Cr, Si) alloy, which clearly showed the influence of the specimen and grain size, were investigated by changing the specimen size extensively. In addition, the effect on the specimen size, grain size and aging condition on the mechanical properties of the grain refining alloy according to the addition of Cr was clarified, and the relationship between these factors was studied. As the specimen size decreased, the yield stress decreased and the fracture elongation increased. This change was evident in alloys with coarse grain sizes. Through FEM analysis, it was confirmed that the plastic deformation was localized in the parallel part of specimen S2. Therefore, when designing a tensile specimen of plate material, the W/L balance should be considered along with the radius of curvature of the shoulder. In the case of under-aged materials of alloys with coarse grain size, the fracture pattern changed from intergranular fracture to transgranular fracture as W/d decreased, and δ increased. This is due to the decrease in the binding force between grains due to the decrease in W. In the specimen with W/d > 40 or more, intergranular fracture occurred, and local elongation did not appear. Under-aged materials of alloys with fine grain size always had transgranular fracture over a wide range of W/d = 70~400. As W/d decreased, δ increased, but the change was not as large as that of alloys with coarse grain sizes. Compared to the under-aged material, the peak-aged material did not show significant dependence on the specimen size of σ_0.2 and δ.

• Nuclear Engineering and Technology
• /
• v.27 no.2
• /
• pp.216-225
• /
• 1995

Simulation for a dynamic analysis of the electrolytic preparation of U(IV) in two-phases system, which consisted of mass transfer of U(VI) from TBP phase into HNO$_3$ solution and electrolytic re-duction of U(VI) to U(IV) at a cathode in aqueous phase, was carried out in order to establish the most suitable operating condition and best electrode area as basic design data for the system. It was found that maintaining an appropriate mass transfer rate was more significant rather than enlarging the surface area of the cathode for more effective production yield of U(IV). The electrode area and the operation time affected deeply the production composition of U(IV) in the resulting aqueous phase. And optimal electrode areas ore evaluated to meet production criteria of U(IV) of resulting solution in several system conditions. Though about 0.37M HNO$_3$ was preferable to prepare the solution of U(IV), nitric acid concentration should be higher than 0.5M to prevent a hydrolysis of U(IV) in the aqueous phase.