• Plant Biotechnology Reports
• /
• v.3 no.3
• /
• pp.259-266
• /
• 2009

A plantlet regeneration protocol was developed on pot-grown mature plants of Elaeocarpus robustus Roxb. cv. Dwarf from nodal and leaf explants. The best yield of adventitious shoots was achieved from the leaf-derived calli in a modified MS ($MMS_1$, half strength of major salts, full strength of minor salts, and vitamins) medium containing $4.0{\mu}M$ BA + $4.0{\mu}M$ Kn + $0.5{\mu}M$ NAA + 15% coconut water (CW). The shoot multiplication rate was amplified about twofold per culture after the addition of 15% CW to the medium. The rate of shoot multiplication reached maximum at the 5th subculture, and it maintained this rate throughout the 3 subsequent subcultures. The best rooting in vitro was investigated by subculturing the microcuttings in an $MMS_2$ (half strength of both major salts and minor salts and full strength of vitamins) medium containing $1.0{\mu}M$ IBA in the dark for one initial week at $30^{\circ}C$, followed by subculturing them in a plant-growth regulator (PGR)-free medium in the light. The plantlets raised in vitro were successfully established under ex vitro conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.506-508
• /
• 2005

In general, organic TFTs are comprised of four components: gate electrode, gate dielectric, organic active semiconductor layer, and source and drain contacts. The TFT current, in turn, is typically determined by channel length and width, carrier field effect mobility, gate dielectric thickness and permittivity, contact resistance, and biasing conditions. More recently, a number of techniques and processes have been introduced to the fabrication of OTFT circuits and displays that aim specifically at reduced fabrication cost. These include microcontact printing for the patterning of metals and dielectrics, the use of photochemically patterned insulating and conducting films, and inkjet printing for the selective deposition of contacts and interconnect pattern. In the fabrication of organic TFTs, microcontact printing has been used to pattern gate electrodes, gate dielectrics, and source and drain contacts with sufficient yield to allow the fabrication of transistors. We were fabricated a pentacene OTFTs on flexible PEN film. Au/Cr was used for the gate electrode, parylene-c was deposited as the gate dielectric, and Au/Cr was chosen for the source and drain contacts; were all deposited by ion-beam sputtering and patterned by microcontact printing and lift-off process. Prior to the deposition of the organic active layer, the gate dielectric surface was treated with octadecyltrichlorosilane(OTS) from the vapor phase. To complete the device, pentacene was deposited by thermal evaporation and patterned using a parylene-c layer. The device was shown that the carrier field effect mobility, the threshold voltage, the subthreshold slope, and the on/off current ratio were improved.

• Korean Journal of Food Science and Technology
• /
• v.18 no.3
• /
• pp.197-203
• /
• 1986

An enzymatic flour milling process for barley into three major fractions (barley flour, bran-crease-germ and water solubles) was studied. Carbohydrate and protein of barley endosperm could be efficiently solubilized by the digestion process of partially pearled barley with enzymes. Bran, crease and germ were removed from hydrolyzate by filtering through 30-40mesh sieves. And then filtered product was separated into fractions by sedimentation or centrifugation. The most effective digestion of the barley was obtained by the enzyme with higher activities of glucanase and protease under such conditions as barley-water ratio, 1:1.5(W/V) and temperature at $45^{\circ}C$. Total flour yield recovered was approximately 73-76% of the barley, and the portions recovered as bran-crease-germ and water solubles were about 3.6 and 15.8%, respectively.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.2
• /
• pp.96-102
• /
• 2006

Development of Rotation-Cylinder Method(RCM) is given for Mg-Al-Zn-X(X=Sr) alloys, identifying some of the key factors that need to be controlled and indicating subsequent casting processes. Effects of Sr addition on the microstructure and mechanical properties of as-cast and T6 heat-treated Mg-Al-Zn-X alloys fabricated by the RCM were investigated. The microstructural and mechanical characterizations were performed by utilizing optical microscope, scanning electron microscope, transmission electron microscope, hardness test and ultimate tensile test. The solution and aging treatment time was varied to optimize the T6 heat treatment conditions, and experimental results were discussed. The grain size of Sr containing alloys was refined by increasing Sr content, but the tensile and yield strengths were increased by addition up to 1wt% Sr.

• Korean Journal of Food Science and Technology
• /
• v.34 no.3
• /
• pp.425-430
• /
• 2002

Physicochemical properties of chicken feet gelatin produced under acidic and alkaline conditions were investigated. Amino acid content of chicken feet gelatin was different from that of commercial gelatin due to the differences in raw materials and production process. Yield and hardness of chicken feet gelatin reached maximum at 24 h under acidic condition and at 1 week under alkaline condition, respectively. As the soaking period increased, viscosity and clarity increased under acidic condition, while decreased under alkaline condition. Color of the acid-treated chicken feet gelatin gel was more desirable than that of the alkali-treated on based upon L, a, b values. From gel permeation chromatography of the chicken feet gelatin, 12 subunits were detected. The amount of high molecular weight subunits, which is related to viscosity and hardness, of the alkali-treated chicken feet gelatin was twice as much as that of the acid-treated one.

• Korean Journal of Food Science and Technology
• /
• v.12 no.2
• /
• pp.133-139
• /
• 1980

The extraction mechanism and extraction conditions of cellular lipid of freeze-dried cells of Rhodotorula rubra YUFE 1526, which was reported as coenzyme Q producing microorganism, were studied. 1. Methyl alcohol was the most appropriate solvent for extraction of cellular lipids and the resulting total lipid was 19.17 weight %. 2. When 1 % (w/v) of freeze-dried cell was extracted by methyl alcohol, the extraction yield was 90.49 % at $50^{\circ}C$ for 2 hr. 3. The diffusivity varied with extraction temperature and the empirical equation was derived as follows : $2.2e^{0-02907T}{\times}10^{-9}\;mm^2/min.$ 4. The diffusivity of cellular lipid of Rhodotorula rubra YUFE 1526 was $9.4{\times}10^{-9}\;mm^{2}/min.$ 5. The extraction model was well fitted on the extraction of cellular lipid.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2195-2201
• /
• 2009

This paper considers the influence of suction-line heat exchangers on the efficiency of a refrigeration cycle using hydrocarbon refrigerants such as R290, R600a and R1270. These suction-line heat exchangers can, in some cases, yield improved system performance while in other cases they degrade system performance. A steady state mathematical model is used to analyze the performance characteristics of refrigeration cycle with suction-line heat exchanger. The influence of operating conditions, such as the mass flowrate of hydrocarbon refrigerants, inner diameter tube and length of suction-line heat exchanger, to the performance of the cycle is also analyzed in the paper. Results showed that the mass flowrate of hydrocarbon refrigerants, inner diameter tube and length of suction-line heat exchanger, and effectiveness have an effect on the cooling capacity, compressor work and RCI(Relative Capacity Index) of this system. With a thorough grasp of these effect, it is necessary to design the compression refrigeration cycle of hydrocarbon refrigerants using suction-line heat exchanger.

• Journal of Surface Science and Engineering
• /
• v.18 no.3
• /
• pp.125-133
• /
• 1985

About 1 mm thick nickel electrodeposits were obtained from nickel sulphamate baths at 40 to 60$^{\circ}C$ over the range of current densities form 5 to 25 A/$dm^2$. Deposits from above about 1.2V of cathode overpotential had randomly distributed fine grains due to a higher nucleation rate and hence had a high hardness. A deposit obtained at 0.63 V had the [110] orientation with a field oriented fine structure which yield a relatively high hardness. Deposite obtained at the intermediate overpotentials showed the [100] orientation with coarse field oriented structure whose column width tended to decrease with increasing cathode overpotential, which, in turn, gave rise to an increase in hardness. Residual stresses of the deposits measured by X-ray technique were mostly tensile but did not exceed 80 MPa, and were occasionally very small compressive. The cathode current efficiency was above 90% in all the electrolysis conditions, whereas the anode current efficiency varied from 50 to 90% with current density, bath temperature and nickel chloride concentration, among which the chloride was the most influential.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.4
• /
• pp.401-406
• /
• 1983

Changes in the soluble sugar content contained in the soybean, soybean milk, soybean curd and soybean whey were determined to investigate the method of reducing the introductions of soluble oligosaccharides like sucrose, raffinose and stachyose, which cause flatulence in human, to soybean curd from soybean by extending the soaking time of soybean. The soybean curd yields according to the extention of the soaking time were also determined. Markedly increased glucose, slightly reduced fructose and sucrose and noticeably reduced raffinose in soybean milk were observed with extended soaking time. Most of sucrose, raffinose and all of maltose were transferred to soybean whey. Gradual increase of soybean curd yields were obtained by extending soaking time within the experimental conditions.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.2
• /
• pp.132-138
• /
• 1994

Bis(diethylamino)aluminum hydride was utilized in a systematic study of the approximate rates and stoichiometry of the reaction of excess reagent with 55 selected organic compounds containing representative functional groups under standardized conditions (THF, $0^{\circ}C$, reagent to compound=4 : 1) in order to define the characteristics of the reagent for selective reductions. The reducing action of BEAH was also compared with that of the parent aluminum hydride. The reducing action of the reagent is quite similar to that of aluminum hydride, but the reducing power is much weaker. Aldehydes and ketones were readily reduced in 1-3 h to the corresponding alcohols. However, unexpectedly, a ready involvement of the double bond in cinnamaldehyde was realized to afford hydrocinnamyl alcohol. The introduction of diethylamino group to the parent aluminum hydride appears not to be appreciably influential in stereoselectivity on the reduction of cyclic ketones. Both p-benzoquinone and anthraquinone utilized 2 equiv of hydride readily without evolution of hydrogen, proceeded cleanly to the 1,4-reduction products. Carboxylic acids and acid chlorides underwent reduction to alcohols slowly, whereas cyclic anhydrides utilized only 2 equiv of hydride slowly to the corresponding hydroxylacids. Especially, benzoic acid with a limiting amount of hydride was reduced to benzaldehyde in a yield of 80%. Esters and lactones were also readily reduced to alcohols. Epoxides examined all reacted slowly to give the ring-opened products. Primary and tertiary amides utilized 1 equiv of hydride fast and further hydride utilization was quite slow. The examination for possibility of achieving a partial reduction to aldehydes was also performed. Among them, benzamide and N,N-dimethylbenzamide gave ca, 90% yields of benzaldehyde. Both the nitriles examined were also slowly reduced to the amines. Unexpectedly, both aliphatic and aromatic nitro compounds proved to be relatively reactive to the reagent. On the other hand, azo- and azoxybenzenes were quite inert to BEAH. Cyclohexanone oxime liberated 1 equiv of hydrogen and utilized 1 equiv of hydride for reduction, corresponding to N-hydroxycyclohexylamine. Pyridine ring compounds were also slowly attacked. Disulfides were readily reduced with hydrogen evolution to the thiols, and dimethyl sulfoxide and diphenyl sulfone were also rapidly reduced to the sulfides.