• Korean Journal of Materials Research
• /
• v.29 no.1
• /
• pp.30-36
• /
• 2019

We evaluate the properties of friction welded STK400 steel tube in terms of the relationship between microstructures and mechanical properties. Friction welding is conducted at a rotation speed of 1,600 rpm and upset time of 3-7 sec for different thicknesses of STK 400 tubes. To analyse the grain boundary characteristic distributions(GBCDs) in the welded zone, electron backscattering diffraction(EBSD) method is introduced. The results show that a decrease in welding time (3 sec.) creates a notable increase grain refinement so that the average grain size decreases from $15.1{\mu}m$ in the base material to $4.5{\mu}m$ in the welded zone. These refined grains achieve significantly enhanced microhardness and a slightly higher yield and higher tensile strengths than those of the base material. In particular, all the tensile tested specimens experience a fracture aspect at the base material zone but not at the welded zone, which means a soundly welded state for all conditions.

• Journal of Korean Medical classics
• /
• v.32 no.2
• /
• pp.49-70
• /
• 2019

Objectives : Medical records of Xueji in the "Xiaozhufurenliangfang" were examined in this study which aimed to look at the medical situation in gynecology of China's Ming Dynasty period, in hopes for it to yield implications and treatment directions to gynecology in $21^{st}$ century Korea. Methods : The medical records were systematically organized with a medical anthropological approach along with overall analysis of the entire records, which lent meaningful statistical information in numeric form. A bibliographical review of the text as historical artifact was undertaken as well. Results : In managing gynecological conditions, Xueji frequently attributed them to depletion of Qi and Blood of the Spleen and Liver. In terms of pathogenic factors, he frequently mentioned Fire and Heat, and as etiological factors, emotional distress. For treatment, he frequently used 'Bu Zhong Yi Qi Tang(補中益氣湯)', 'Xiao Yao San(逍遙散)' and 'Gui Pi Tang(歸脾湯)'. Conclusions : Through studying the medical records of Xueji in "Xiaozhufurenliangfang" a close look into a master's insight on gynecological disorders in terms of diagnosis and treatment was achieved. The formulas he used are widely applied even today, and this study shows that the formulas's clinical application could be expanded even wider.

• Membrane and Water Treatment
• /
• v.10 no.3
• /
• pp.213-221
• /
• 2019

Anaerobic digestion (AD) has been widely used to valorize food waste (FW) because of its ability to convert organic carbon into $CH_4$ and $CO_2$. Korean FW has a high content of fruits and vegetables, and efficient hydrolysis of less biodegradable fibers is critical for its complete stabilization by AD. This study examined the digestates from different anaerobic digesters, namely Rs, Rr, and Rm, as the inocula for the AD of vegetable waste (VW) and cellulose (CL): Rs inoculated with anaerobic sludge from an AD plant, Rr inoculated with rumen fluid, and Rm inoculated with anaerobic sludge and augmented with rumen fluid. A total of six conditions ($3\;inocula{\times}2\;substrates$) were tested in serial subcultures. Biogas yield was higher in the runs inoculated with Rm than in the other runs for both VW (up to 1.10 L/g VS added) and CL (up to 1.05 L/g VS added), and so was biogas production rate. The inocula had different microbial community structures, and both substrate type and inoculum source had a significant effect on the formation and development of microbial community structures in the subcultures. The overall results suggest that the bioaugmentation with rumen microbial consortium has good potential to enhance the anaerobic biodegradability of VW, and thereby can help more efficiently digest high fiber-content Korean FW.

• Steel and Composite Structures
• /
• v.31 no.3
• /
• pp.291-301
• /
• 2019

Pure torsion loading conditions were not frequently occurred in practical engineering, but the torsional researches were important since it's the basis of mechanical property researches under complex loading. Then a 3D finite element model with precise material constitutive models was established, and the effectiveness was verified with test data. Parametric studies with varying factors as steel yield strength, concrete strength and sectional height-width ratio, were performed. Internal stress state and the interaction effect between encased steel tube and the core concrete were analyzed. Results indicated that due to the confinement effect between steel tube and core concrete, the torsional strength of CFT columns was greatly improved comparing to plain concrete columns. The steel ratio would greatly influence the torque share between the steel tube and the core concrete. Then the torsional strength calculation formulas for core concrete and the whole CFT column were proposed. The proposed formula could be simpler and easier to use with guaranteed accuracy. Related design codes were more conservative than the proposed formula, but the proposed formula presented more satisfactory agreement with experimental results.

• Steel and Composite Structures
• /
• v.31 no.4
• /
• pp.409-417
• /
• 2019

The choice of individual material for industrial application is primarily based on knowledge of its behavior in similar applications and similar environmental conditions. Contemporary design implies knowledge of material behavior and knowledge in the area of structural analysis supported by large capacity computers. Bearing this in mind, this paper presents and analyzes the experimental results related to the mechanical properties of the material considered (30CrNiMo8/1.6580/AISI 4340) at different temperatures as well as its creep and fatigue behavior. All experimental tests were carried out as uniaxial tests. The test results related to the mechanical properties are presented in the form of engineering stress-strain diagrams. The results related to the creep behavior of the material are shown in the form of creep curves, while the fatigue of the material is shown in the form of stress - life (S - N) diagram. Based on these experimental results, the values of the following properties are determined: ultimate tensile strength (${\sigma}_{m,20}=696MPa$), yield strength (${\sigma}_{0.2,20}=355.5MPa$), modulus of elasticity ($E_{,20}=217GPa$) and fatigue limit (${\sigma}_{f,20,R=-1}=280.4MPa$). Results related to fatigue tests were obtained at room temperature and stress ratio R = -1.

• Nuclear Engineering and Technology
• /
• v.51 no.2
• /
• pp.495-500
• /
• 2019

When a new fuel is developed, various mechanical properties are absolutely necessary for a safety analysis of the fuel for the licensing and prediction of its mechanical behavior during operation and accident conditions. In this paper, a mechanically equivalent surrogate plate of U-Mo dispersion fuel is presented using tungsten, substitute material of U-Mo particle. A surrogate plate, composed of tungsten/aluminum dispersion meat and aluminum alloy cladding, is manufactured with the same fabrication process with that of fuel plate except that a tungsten powder is used instead of U-Mo powder. A modal test showed that the surrogate plate and fuel plate have similar dynamic characteristics, and a tensile test demonstrated the similarity of the material property up to the yield strength range. The conducted tests proved that the surrogate tungsten plate has equivalent mechanical behaviors with that of a fuel plate, which leads to the acceptable use of a surrogate fuel assembly using tungsten/aluminum dispersion meat in various mechanical tests. The surrogate fuel assembly can be utilized for various out-of-pile characteristic tests, which are necessary for the licensing achievement of a research reactor that uses U-Mo dispersion fuel as a driver.

• Microbiology and Biotechnology Letters
• /
• v.49 no.3
• /
• pp.320-328
• /
• 2021

High GABA-enriched yeast extract, for various nutritionally and pharmaceutically important functional foods, was prepared using a novel isolate of Debaryomyces hansenii JBCC541. Under optimized conditions, GABA conversion rates are significantly enhanced up to 7.55 g/l by D. hansenii JBCC541, increasing their synthesis yield 40 times. The total amino acid content of the prepared yeast extract was 10733.86 mg/l (257.36 mg/g), consisting of alanine, lysine, glutamine, leucine, and valine as the primary amino acids. The GABA content was significantly enhanced up to 6790 mg/l (162.80 mg/g) in the presence of glutamic acid, with approximately 10-fold higher GABA production. Flavor amino acids were also highly enhanced, indicating that the prepared yeast extract might be useful for preparing various functional and sensuous foods. Our results were promising as a GABA-enriched yeast extract preparation tool ensuring a suitable food material level with the potential for functionally enhanced food industrial applications.

• Mycobiology
• /
• v.49 no.2
• /
• pp.161-172
• /
• 2021

Phellinus strains were collected from different areas in Korea. Of them, the fast mycelial growing strains were artificially cultivated on the oak logs to produce fruiting body. The varieties, Phellinus linteus ASI26099 (Korea Sanghwang) and P. baumii PBJS (Jangsoo Sanghwang) were grown under the same conditions as controls. Their cultivating characteristics including mycelial colonization, pinhead formation, and fruiting body formation rate were investigated on the logs. Basidiocarps of Phellinus strains HN00K9, HN6036, and ASI26099 were concentrically zonate and shallowly sulcate, and dark chestnut showing typical characteristics of Tropicoporus linteus (synonyum: P. linteus, Inonotus linteus, polyporus linteus), which is distinguishably different to PBJS. HN00K9 showed the highest yield of fruiting body among the mushroom strains. The β-glucan content in fruiting bodies of HN00K9 was 20% higher than those of other strains. Bioactive effects of polysaccharide samples from fruiting bodies of Phellinus strains, HN00K9, HN6036, ASI26099, and PBJS were assessed on cell viability and cytokine (IL-6 and TNF-α) inhibition and finally on anticancer to different human cancer cells.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.157-158
• /
• 2019

As the aggregate supply and demand shortages in Korea due to the lack of aggregates due to the regulation of production and use conditions of domestic aggregate collectors, the media recently pointed out the distribution of so-called bad aggregates containing soil powder. Such poor aggregates have a high self-absorption rate according to the reference, etc., leading to a decrease in the fluidity of the concrete. Therefore, in order to secure fluidity, the unit quantity increases greatly from $30kg/m^3$ to $55kg/m^3$, and the increased unit yield eventually leads to a decrease in compressive strength, resulting in a decrease in strength from about 35% to 45% compared to general aggregates. It indicates that there is a risk of shortening the life of the structure. Therefore, this study aims to analyze the effect of aggregate soil on concrete.

• New & Renewable Energy
• /
• v.16 no.4
• /
• pp.83-91
• /
• 2020

In this study, the reusability of the Fenton oxidation solution was evaluated to reduce the cost of the pretreatment process. Biomass was sequential subjected to Fenton oxidation-hydrothermal treatment and enzymatic hydrolysis to produce monosaccharides. The liquid solution recovered after Fenton oxidation contained OH radicals with a concentration of 0.11 mol/L. This liquid solution was reused for a new Fenton oxidation reaction. After Fenton oxidation, hydrothermal treatment was performed under the same conditions as before, and 9.34-13.63 g/L of xylose was detected. This concentration was slightly lower than that of a fresh Fenton oxidation solution (16.51 g/L) but was higher than that obtained by hydrothermal treatment without Fenton oxidation (2.72 g/L). The degradation rate during hydrothermal pretreatment involving Fenton oxidation was 36.02%, which decreased (29.24-31.05%) slightly when the liquid solution recovered after Fenton oxidation was reused. However, the degradation rate increased compared to that measured from hydrothermal treatment without Fenton oxidation (15.21%). Moreover, the yield after enzyme hydrolysis decreased in the following order: fresh Fenton oxidation-hydrothermal treatment (89.64%) > Fenton oxidation with reused solution-hydrothermal treatment (74.84%) > hydrothermal treatment without Fenton oxidation (32.05%).