• Journal of Surface Science and Engineering
• /
• v.40 no.6
• /
• pp.262-270
• /
• 2007

Recently, there has been a new appreciation of aluminum alloys as materials that are capable of reducing the environment load. This is because aluminum alloys are lightweight, easy to recycle, permit miniaturization, and have environmental friendly properties. In this study, we investigated the mechanical and electrochemical properties of 5083F aluminum alloys using slow strain rate test(SSRT) and potentiostatic tests under various potential conditions. In the potentiostatic tests, the current density in the potential range from -0.7 to -1.4V after 1,200 s was low. After considering the results of the potentiostatic tests, maximum tensile strength, yield strength, elongation, time-to-fracture, observation of fractured specimen and fractography analysis, the optimum protection potential range was between -1.3 and -0.7V(Ag/AgCl).

• Journal of Powder Materials
• /
• v.11 no.2
• /
• pp.105-110
• /
• 2004

In this study the possibility to obtain a homogeneous mixture and to produce solid solutions and intermetallic compounds of Fe and Al nano particles by simultaneous pulsed wire evaporation (S-PWE) have been investigated. The Fe and Al wires with 0.45 mm in diameter and 35 mm in length were continuously co-fed by a special mechanism to the explosion chamber and simultaneously exploded. The characteristics, e.g., phase composition, particle shape, and specific surface area of Fe-Al nano powders have been analyzed. The synthesized powders, beside for Al and $\alpha$-Fe, contain significant amount of a high-temperature phase of $\gamma$-Fe, Fe Al and traces of other intermetallics. The phase composition of powders could be changed over broad limits by varying initial explosion conditions, e.g. wire distance, input energy, for parallel wires of different metals. The yield of the nano powder is as large as 40 wt ％ and the powder may include up to 46 wt % FeAl as an intermetallic compound.

• YAKHAK HOEJI
• /
• v.36 no.5
• /
• pp.506-511
• /
• 1992

The Prostaglandins were derivatized rapidly with monodansyl cadaverine as a fluorophore in mild conditions. The carboxylic moiety of prostaglandins was activated with diethyl phosphorocyanidate and successively coupled with fluorophore in dimethylformamide at room temperature. The labeling yield was reached about 95% at 15 min using arachidic acid $(C_{20:0})$ as a test sample. This derivative showed constant fluorescent intensity at $4^{\circ}C$ for 180 days. The derivatives of prostaglandins were shown high solvent selectivity with tetrahydrofuran in reversed-phase column. therefore, these derivatives could be successfully separated on YMC pack A-212(S-5 120A C8) column in tetrahydrofuran-based eluents. The detection limits of these derivatives was ca. 500 fmol and determination limits was ca. 5 pmol as injected amount in fluorescent detection $({\lambda}ex.\;340\;nm,\;{\lambda}em.\;520\;nm)$. In this method, the ranges of recovery and coefficient of variation were $93.6{\sim}102.7%$ and $4.3{\sim}5.8%$, respectively.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1322-1327
• /
• 2004

There are some previous studies that utilize constant impedance models or constant current models for electric trains to perform the static analysis of AT feeding systems. These mentioned models have some merits of linear systems but yield erroneous results because of the innate restraints of the models since linear models cannot represent the features of constant power in inverter-driven trains. From these reasons, it is suitable that the train be considered as a constant load model when it drives or as a constant source model when it applies regenerative brake. However, excessive rise of regenerative voltage during the braking may damage the vehicle itself and the feeding systems so the voltage must be restricted below a certain value. Keeping these facts in minds, we suggest new methods of analyzing AT feeding systems using the constant power models with the conditions of voltage constraints. The simulation results from a sample system using the proposed method illustrate both the states of system variables and the supply-demand relation of power among the trains and the systems very clearly, so it is believed that the proposed method yields more accurate results than conventional methods do.

• English Language & Literature Teaching
• /
• v.16 no.3
• /
• pp.59-80
• /
• 2010

The present study investigated what kind of form-focused instruction would yield better results for incidental learning of English verb patterns in two experiments. Experiment 1 compared the effectiveness of focus on form (reading + translation) and focus on forms (verb pattern list + translation) tasks in learning new English verb patterns incidentally in Korean EFL college classrooms. The results of Experiment 1 showed significantly higher results for the focus on forms group. Since it was revealed by Experiment 1 that the learners did not notice unknown target verb patterns, Experiment 2 was undertaken to examine whether the difference between the focus on form and focus on forms conditions found in Experiment 1 would be retained even after the isolated form-focused instruction or focus on forms aiming at teaching students how to recognize verb patterns was provided for the learners before the focus on form and focus on forms tasks were carried out. The results showed that the focus on form group yielded significantly higher incidental learning scores than the focus on forms group. The effectiveness rates of the focus on form in Experiment 2 were statistically higher than those of the focus on forms in Experiment 1. The results of the two experiments indicated that the combination of the isolated form-focused instruction and focus on form was significantly more effective in learning English verb patterns incidentally. In conclusion, form-focused instruction including both isolated form-focused instruction and focus on form is an effective way to incidental learning of English verb patterns.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.3
• /
• pp.143-149
• /
• 2018

It has become ever harder to design reliable circuits with each nanometer technology node; under normal operation conditions, a transistor device can be affected by various aging effects resulting in performance degradation and eventually design failure. The reliability (aging) effect has traditionally been the area of process engineers. However, in the future, even the smallest of variations can slow down a transistor's switching speed, and an aging device may not perform adequately at a very low voltage. Therefore, circuit designers need to consider these reliability effects in the early stages of design to make sure there are enough margins for circuits to function correctly over their entire lifetime. However, such an approach excessively increases the size and power dissipation of a system. As the impact of reliability, new techniques in designing aging-resilient circuits are necessary to reduce the impact of the aging stresses on performance, power, and yield or to predict the failure of a system. Therefore, in this paper, a novel low power on-chip self-tuning circuit considering the aging effects has been proposed.

• Journal of the Korean Chemical Society
• /
• v.6 no.1
• /
• pp.88-93
• /
• 1962

The telomerization of vinyl acetate with carbon tetrachloride, chloroform and monochlorobenzene were investigated with respect to the synthesis of those telomers, properties and molecular weights of the formed telomers, and reaction mechanisms. Vinyl acetate reacted with carbon tetrachloride and chloroform to form telomers at 70-90$^{\circ}C$ and 60-70$^{\circ}C$, respectively and it formed polymer with monochlorobenzene. As a chain transfer agent, carbon tetrachloride was more effective than chloroform. In the telomerization of vinyl acetate and carbon tetrachloride: 1) The average molecular weight of the telomer decreased as the mole ratio of carbon tetrachloride to vinyl acetate increased. The optimum conditions for the highest yield of the telomer were as follows: Mole ratio of carbon tetrachloride to vinyl acetate : 2.5 Reaction time : 20 hours. 2) As the reaction proceeded, the refractive index and average molecular weight of the telomer increased rapidly in the first 10 hours but the increase was slow through the next 10 hours, so that, the average recurring number(n) of taxogen in the final product reached an almost definite value, i.e., 3. The telomer formed in the telomerization of vinyl acetate with carbon tetrachloride and chloroform turned to brown color in the air due to decomposition or polymerization. The suggested telomerization mechanism was supported by the hexachloroethane detected in the course of reaction.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.23-30
• /
• 1993

This rape deals with the experimental and theoretical investigations on the aerodynamic performance of the Wells turbine. The two-dimensional cascade theory is used to estimate the thrust and torque of turbine, and finally to yield an efficiency of turbine. The turbine is assumed to rotate with a constant rotational speed in a sinusoidally varying unsteady flow field. Experimental approach is made in a wave simulator, producing a sinusoidally reciprocating air flow corresponding to the wave motion in an Oscillating Water Column(OWC) chamber. Performance data of turbine measured at various operating conditions are analyzed and compared to numerical results in order to understand the overall features of a Wells turbine.

• The Korean Journal of Ecology
• /
• v.9 no.3
• /
• pp.123-133
• /
• 1986

Black pine, Pinus thumbergii, stands in southwestern Korea were investigated. The black pine forest with 90 percent or more in the relative basal area (black pine basal area/whole pine basal area, RBA) was found in the coastal area. However, from the coastal area to the inland. RBA of the pine was decreased because the competition with red pine (P. densiflora) and/or pitch pine (P. rigida). In 25 year-old plants at the coastal areas, the wood volume of black pine is twofold or more than that of red pine, fourfold or more than that of pitch pine. The optimum rotation period for the maximum yield of black pine is estimated to take 35 years, based on the site index calculated. The optimal temperature for the pine plantation in Korean peninula should be the area in over 105。C.month in warmth index. And the soil conditions with 50% of RBA or over were 0.025%~0.151% of soil salinity, 3~6% of organic matter content, pH value 4.50~5.04, 8.5~11.0 me/100g of C.E.C..

• Journal of Environmental Science International
• /
• v.21 no.10
• /
• pp.1265-1274
• /
• 2012

This study was conducted to investigate the extraction characteristics including total polyphenol compound content (TPC) and the antioxidative effect of Rumex crispus root extract on commercial corn oil. Extraction yield was increased with extraction temperature but decreased with extraction ratio. No significant differences in aromatics content were found among the extracts prepared with various extraction conditions; extraction ratio, extraction temperature, extraction pH and composition of extractant. Total flavonoid content of the extract was increased with extraction temperature and extraction pH, and highest value of it was found when extractant composition of ethanol in water was 75%. Total polyphenol compound content (TPC) of the extract with 10 fold extraction ratio showed the highest value, but no significant difference in TPC was found with extraction temperature. Reducing power and DPPH (${\alpha}$,${\alpha}$-diphenyl-${\beta}$-picrylhydrazyl) radical scavenging ability (RSA) of the extract in spectrophotometric absorbance were decreased with extraction ratio but increased with extraction temperature and showed 63.1%~98.4% and 67.6%~86.7% of those of ascorbic acid in reducing power and DPPH RSA, respectively. The antioxidative effects of the extract on corn oil were 84.8~93.0% of that of commercial butylated hydroxytoluene, the antioxidant index value was highest when the ethanol composition to water in extractant was equal ratio.