• International Journal of Industrial Entomology and Biomaterials
• /
• v.33 no.1
• /
• pp.24-30
• /
• 2016

1-Deoxynojirimycin (DNJ) have been extensively investigated for their α-glucosidase inhibitor on postprandial hyperglycemia, and applied in nutraceuticals and medicine for preventing or delaying progression of type 2 diabetes. However, the amount of DNJ in mulberry leaves is low (about 0.1%), therefore, more effective extraction method is needed. This study was performed to develop microbial DNJ for biological methods of DNJ as an alternative to the chemical methods. In this study, we obtained evidence for Bacillus subtilis that produce DNJ in large quantities by high performance liquid chromatography. Inhibition of α-glucosidase activity was determined to DNJ production or non-production. Investigation of the effect of mulberry leaves powder concentration (1~5%), using the DNJ high-production bacteria, provided evidence for microbial mass production of DNJ. When the 4% mulberry leaf powder for 9 days was used, the α-glucosidase inhibitory activity was over the 85%. Also, the results presented in this study confirm DNJ yield's increasement in microbes using the various of nutrients and provide insight of ways to improve DNJ yields in microorganisms.

• Food Science and Preservation
• /
• v.7 no.2
• /
• pp.177-183
• /
• 2000

A supercritical fluid extraction was performed for the extraction of phenolics from grape seeds which up to now have been discarded. The optimum condition for extraction process was predicted through response surface methodology using central composit experimental design. The extraction amount of grape seed phenolics was increased by increasing extraction temperature, pressure, and concentration of co-solvent (ethanol). The optimum extraction conditions were 84.83$^{\circ}$C, 51.50MPa and 1.27% ethanol. The yield of phenolics using SFE was higher with 3 folds than ethanol and 4 folds than hexane but less than 80% methanol. In the respects of food poisoning, the approved solvents were restricted to ethanol and hexane. So, SFE for extraction of phenolics could be powerful alternative method for solvent extraction.

• Computers and Concrete
• /
• v.14 no.5
• /
• pp.613-633
• /
• 2014

A double-skinned composite tubular (DSCT) column, which consists of concrete and inner and outer tubes, was finally developed to overcome the weaknesses of concrete filled tube columns by reducing the self-weight of the column and confining the concrete triaxially. Research pertaining to the stiffness and strength of the column and the confining effect in a DSCT column has been carried out. However, detailed studies on the confining stress, especially the internal confining stress in a DSCT column, have not been carried out. Internal and external confining stresses should be evaluated to determine the effective confining stress in a DSCT column. In this paper, the confining stresses of concrete before and after insertion of an inner tube were studied using finite element analysis. The relationship between the internal or external confining stresses and the theoretical confining stress was investigated by parametric studies. New modified formulae for the yield and buckling failure conditions based on the formulae suggested by former researchers were proposed. Through analytical studies, the modified formulae were verified to be effective for economic and reasonable design of the inner tubes in a DSCT column under the same confining stress.

• Journal of Microbiology
• /
• v.39 no.3
• /
• pp.195-201
• /
• 2001

The effect of moisture content an the reductive dechlorination of polychlorinated biphenyls and population dynamics of dechlorinating microorganisms was investigated in sediments spiked with Aroclor 1248. In sediment slurry with an overlying water layer, dechlorination ensued after a 4-week lag period and reduced the average number of chlorines per biphenyl from 3.91 to 3.15 after 48 weeks. In the sediments of reduced moisture content, however, dechlorination occurred after a lag period of 12 weeks and decreased the average number of chlorines per biphenyl to only 3.62, and the dechlorination rate was also slower. When the population size of dechlorinators, methanogens, and sulfate-reducing bacteria was determined by the most probable number techniques, however, no difference was found between the slurry and the low-moisture sediments, except for methanogens. The growth of dechlorinating populations coincided with the end of the lag period and they then increased by 3 orders of magnitude in two conditions. Specific growth rate of dechlorinators showed little difference between the slurry and the low-moisture sediments; however, growth yield was high in the sediments of reduced moisture content. The reduction of sediment moisture decreased the dechlorination rate and extent of PCBs but did not inhibit the growth of PCB dechlorinators.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.3-10
• /
• 2013

Please In this paper, to cope with biased impulsive noise problems, a new information potential is proposed that can move the transmitted symbol points by modifying the information potential designed with Dirac-delta functions. Based on the proposed information potential a new blind algorithm is derived by employing an augmented filter structure. From the simulation results in the environment of biased impulsive noise, the conventional algorithms yield performance degradation by over 15 dB, but the proposed algorithm shows no performance degradation and holds the same steady state MSE of below -25 dB as after the initial convergence regardless of the channel conditions.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3163-3168
• /
• 2014

Three kinds of lanthanum oxides ($La_2CO_3$) were synthesized from different methods and used as a catalyst in the transesterification of dimethyl carbonate (DMC) with glycerol for the synthesis of glycerol carbonate (GLC). Lanthanum oxide synthesized using a surfactant (S-La) showed a much higher GLC yield of 89.9% compared to other lanthanum oxides synthesized by calcination (C-La) and precipitation (P-La) at the reaction conditions of $90^{\circ}C$, DMC/glycerol = 2, and catalyst/glycerol = 5 wt %. The best catalyst was obtained when the surfactant/La weight ratio was 12. XRD study revealed that S-La has large amount of monoclinic and hexagonal $La_2O_2CO_3$ phases, which are assumed as active sites of the catalyst for the reaction.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3219-3223
• /
• 2014

Ochnaflavone, a naturally occurring biflavonoid composed of two units of apigenin (5,7,4'-trihydroxyflavone) joined via a C-O-C linkage, was first synthesized and evaluated its inhibitory activity on $PGE_2$ production. Total synthesis was accomplished through modified Ullmann diaryl ether formation as a key step. Coupling reactions of 4'-halogenoflavones and 3'-hydroxy-5,7,4'-trimethoxyflavone were explored in diverse reaction conditions. The reaction of 4'-fluoro-5,7-dimethoxyflavone (2c) and 3'-hydroxy-5,7,4'-trimethoxyflavone (2d) in N,N-dimethylacetamide gave the coupled compound 3 in 58% yield. Synthetic ochnaflavone strongly inhibited PGE2 production ($IC_{50}=1.08{\mu}M$) from LPS-activated RAW 264.7 cells, which was due to reduced expression of COX-2. On the contrary, the inhibition mechanism of wogonin was somewhat different from that of ochnaflavone although wogonin, a natural occurring anti-inflammatory flavonoid, showed strong inhibitory activity of $PGE_2$ production ($IC_{50}=0.52{\mu}M$), and seems to be COX-2 enzyme inhibition. Our concise total synthesis of ochnaflavone enable us to provide sufficient quantities of material for advanced biological studies as well as to efficiently prepare derivatives for structure-activity relationship study.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2324-2328
• /
• 2007

Organic fluorine chemistry produces many useful products. This paper elucidates the reaction of ethyl-4,4- difluoro-2-iodo-5-oxo-5-phenylpentanoate (2) with primary amines in a one-pot scheme. The reaction produced a series of β-fluoropyrrole derivatives at ambient temperatures. In this reaction, the less bulky the primary amine the higher was the resultant yield. When (2) and aqueous methylamine (40%) were allowed to react below 0 oC, 5-(ethoxycarboxyl)-1-methyl-3,3-difluoro-2-hydroxy-2-phenylpyrrolidine, an intermediate molecule for 2-ethyl-4-flouro-1-methyl-5-phenylpyrrole-2-carboxylate (5), was isolated first. Then, (5) reacted with hydroperchloric acid and acetic anhydride to form 5-(ethoxycarboxyl)-1-methyl-3,3-difluoro-2- phenylpyrrolinium perchlorate (6), which was converted to 2-ethyl-4-flouro-1-methyl-5-phenylpyrrole-2- carboxylate gradually in the presence of a base. Our experiments demonstrate that the formation of 2-ethyl-4- flouro-1-methyl-5-phenylpyrrole-2-carboxylate occurs via both one-pot schemes and stepwise pathways, depending on the reaction conditions. The isolation and characterization of the isolated intermediate (6) suggest an anionic pathway for this reaction.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2139-2152
• /
• 2007

Ruthenium complex-catalyzed reactions often require highly qualified tuning of reaction conditions with substrates to attain high yield and selectivity of the products. In this review, our strategies for achieving characteristic ruthenium complex-catalyzed co-oligomerization of different alkenes are disclosed: 1) The codimerization of 2-norbornenes with acrylic compounds by new ruthenium catalyst systems of RuCl3(tpy)/Zn [tpy = 2,2':6',2''-terpyridine] or [RuCl2(η6-C6H6)]2/Zn in alcohols, 2) A novel synthesis of 2-alkylidenetetrahydrofurans from dihydrofurans and acrylates by zerovalent ruthenium catalysts, such as Ru(η4-cod)(η6-cot) [cod = 1,5-cyclooctadiene, cot = 1,3,5-cyclooctatriene] and Ru(η6-cot)(η2-dmfm)2 [dmfm = dimethyl fumarate], 3) Regio- and stereoselective synthesis of enamides by Ru(η6-cot)(η2-dmfm)2-catalyzed codimerization of N-vinylamides with alkenes, and 4) Unusual head-to-head dimerization of styrenes and linear codimerization of styrenes with ethylene by Ru(η6-cot)(η2-dmfm)2 catalyst in the presence of primary alcohols.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.6
• /
• pp.300-306
• /
• 2015

For an asymmetric scroll compressor for heat pump application, a numerical simulation was carried out to investigate the effects of injection port design on the compressor's performance under gas injection. To validate the simulation, the numerical results were compared with experimental results obtained from a scroll compressor with a base injection port design. There was good agreement between simulation and experimental results, with around a 1% difference in the injection mass flow rate when the injection pressure was below $12kgf/cm^2A$ for the heating mode. Various injection port angular positions were numerically tested to yield better injection performance. The largest improvement in heating capacity was obtained at angles of $240^{\circ}$ and $200^{\circ}$ inward from the scroll wrap end angle for low-temperature and standard heating conditions, respectively, while the maximum COP improvement was at $365^{\circ}$ and $280^{\circ}$, respectively. A considerable improvement in cooling capacity was also found at the injection port angle of $240^{\circ}$.